HD - ERSCE MRL lift at Sagrada Familia station, Barcelona
@iqraamjid529710 күн бұрын
Love Lifts
@iqraamjid529710 күн бұрын
ERSCE MRL lift to platform at Sagrada Familia station
@iqraamjid529710 күн бұрын
Love Lifts
@MitsubishiGTO12 күн бұрын
Hate to seem pretentious, but EcoDisc is the motor Kone use, and MonoSpace is the model. This is a common mistake, often used by Beno viewers. Another thing to note is that there are no generations of MonoSpace, just changes in fixtures. Once again Mr Gittings is at fault. And lift engineers call pre-doors ADO; Beno, AGAIN. As I said, these are common mistakes.
@MitsubishiGTO12 күн бұрын
Once again, sorry to seem insulting, keep up the good work! 👍🏼
@lovelifts17369 күн бұрын
@@MitsubishiGTO Hi, thanks for the comment, and the technical information (which I need)! I'll for sure take that on board. Am I correct in thinking that ADO stands for Advanced Door Opening?
@MitsubishiGTO5 күн бұрын
Yes; ADO does stand for advanced door opening- I think Kone uses this term internally, same as terms like ACU. Just saying this because lifts are complex and it’s ok to use simplified terms most of the time- e.g. generations of Kone MonoSpace instead of fixtures (4th gen MS instead of MS with KSS280)
@LIFTEXCELSIOROfficial12 күн бұрын
I'd defo stick with wide angle - imo it's a much better representation of what the viewer's eyes would see if they were there in person, and usually I find that's the best type of camera angle. I took it up a few years ago and have never gone back lol. But the normal angle works fine too.
@lovelifts17369 күн бұрын
Thanks, I'll definitely play around with it, see what works for me. Never had a wide angle lens on a phone until last year lol :)
@bobswan619612 күн бұрын
Looks good. 😊
@lovelifts17369 күн бұрын
Thanks :)
@maarii96912 күн бұрын
6:32 sounds like a different language lol Edit: 7:21 sounded like somebody closed the door lol Edit 2: Yes i liked my own comment
@mattacat362212 күн бұрын
I think wide angle is best in small lifts. Had to use it on a 8 person Stannah I filmed today for example. Is also good if you want to get an angle of the door and the indicator in the same shot! :))
@lovelifts17369 күн бұрын
Cool, I'll try that door and indicator angle some time, thanks :)
@Thebusguyplayz312 күн бұрын
Nice
@lovelifts173612 күн бұрын
Thanks :)
@Thebusguyplayz312 күн бұрын
@@lovelifts1736 your welcome I do film hand dryers and stuff to when I went to Southampton recently I saw a Mitsubishi jet towel slim airfury and a +TSL
@Morgansliftadventures12 күн бұрын
Oooh, nice lift, looks good! Very interesting! Maybe you should use them often. Realisticly, it's up to you :)
@lovelifts173612 күн бұрын
I really like it, and I quite like the Lester mod on it too IMO. I appreciate that they've kept the original Express lift plaque. Thanks for the comment re the wide angle, I'll play around with it in other lifts :)
@Mind-The-Doors12 күн бұрын
Sad to see it’s original logic gone. I think the wide angle lens looks better with more compact lifts because it helps to show everything a bit easier, but it isn’t always needed for bigger lifts. But both are good though
@lovelifts173612 күн бұрын
Thanks for the feedback, I'll try it on a bigger lift at some point as well :)
@Morgansliftadventures12 күн бұрын
its not called the "logic", its a controller. they are the same, but controller is the actual name for it. logic is just used by beno.
@Mind-The-Doors12 күн бұрын
@@Morgansliftadventures I’m honestly not surprised that his vocabulary has rubbed off on me 😭 but yay other trans person
@lovelifts17369 күн бұрын
@@Mind-The-Doors Yeah, me too! And I have been (and still am) a long time Beno follower (he inspired me to start lift filming) :)
@lovelifts17369 күн бұрын
@@Morgansliftadventures Fair enough, that makes sense :)
As of 2024 these lifts are still here. Well, the one on the left is still working completely fine and is still awesome, the one on the right has either been switched off or abandoned. There's also a side lift identical to these which is still original as well.
@StanMurrayАй бұрын
At 1:43 why is their animal sounds?😂😂😂
@StanMurrayАй бұрын
Nice
@Joshua_Park_6932 ай бұрын
I don't like Xlerators
@Joshua_Park_6932 ай бұрын
I don't like that hyco hand dryer
@Joshua_Park_6932 ай бұрын
The 2 in 1 tap hand dryer sounds like dyson airblade
@levigaming-1Ай бұрын
Bc it is a dyson
@StanMurray2 ай бұрын
Nice video
@randm28412 ай бұрын
The mediclinics model is a machflow
@yaummyburger2 ай бұрын
The feminine urge to watch these>>>>>>>
@arturwozniak6812 ай бұрын
Oh dear EPIC FAILURE 👎👎👎👎👎 Someone has to really fix it And to redesign the bathrooms
@arturwozniak6812 ай бұрын
Unlucky day 💔💔 Hand dryer epic failure 👎👎
@joesbustrainplaneliftadven91183 ай бұрын
Gave you a shout out on the cavendish house urbex
@imacgra13 ай бұрын
That sounds like from next door 6:59
@imacgra13 ай бұрын
There are two types of hand dryers evaporative like the one you’re using, or about to use and jet. For example, the Dyson air-blade -evaporative dryers, tend to use warm air 7:13 7:13
@imacgra13 ай бұрын
I very clearly remember being scared of that spin up sound- the sound you hear about a second before it gets to full speed 5:35 5:35 5:36
@imacgra13 ай бұрын
I thought deta made conduit 1:34 1:39
@handdryersbyn17693 ай бұрын
The Warner Howard is a rebadged CERA 136484, the Sector a rebadged Anda Series 5000, Newlec a rebadged AIKE AK2803B with Anda as the middle man, Dryflow is another AIKE AK2803, F Series is actually a Velair F Series, but in reality its a rebadged KINGWE. Air Fury is a rebadged HOKWANG, ATC Cub is a rebadged AIKE AK2805 and Tiger a rebadged AIKE AK2901. That Newlec is good because Newlec don't make dryers, they rebadge them, and all of their dryers are Andas. However, recently, Anda have discontinued most of their range and now just sell AIKEs, which are all high-speed, hence why this Newlec is faster.
@edgardorubio93963 ай бұрын
😊😊😊😊😊😊😊😊
@LIFTEXCELSIOROfficial3 ай бұрын
That gated lift's motor is simply incredible! All things considered I think I would prefer the MP though; it looks quite characterful.
@lovelifts17363 ай бұрын
Indeed, that was honestly one of the most epic sounding motors I've ever heard! Yeah, the MP is a characterful lift 🙂
@MichalM3 ай бұрын
Check the planning applications! It might still be there.
@bobbyshanddryersliftsandes97313 ай бұрын
CHEEEAAPPP
@joesbustrainplaneliftadven91183 ай бұрын
Sadly this place is closing down
@lovelifts17363 ай бұрын
I have seen on the news, so sad 😢
@joesbustrainplaneliftadven91183 ай бұрын
@@lovelifts1736 hope you do a farewell lift video to the place
@lovelifts17363 ай бұрын
@@joesbustrainplaneliftadven9118I will have a video ready for when it does close, in mid-April I believe.
@joesbustrainplaneliftadven91183 ай бұрын
@@lovelifts1736 I’ll be doing my farewell
@joesbustrainplaneliftadven91183 ай бұрын
Amazing video Dunelm usually have generics made by horizon and one has a standard gen2
@Mind-The-Doors3 ай бұрын
Nice video, I actually quite like the interiors of the Oakland cabs
@lovelifts17363 ай бұрын
Thanks, I agree, I find Oaklands to be quite characterful :)
@LIFTEXCELSIOROfficial3 ай бұрын
3:16 Keighley? Had no idea they still existed XD Great compilation; my favourites have got to be the Oaklands, can't go wrong with a good Oakland jolt XD
@lovelifts17363 ай бұрын
Ikr! They still do, according to Doppler! XD Thanks, I agree :)
@LGCT3 ай бұрын
The Old Keighley Company was sold to Schindler. The New Keighley Brand is part of Swansea Lifts which is a Doppler Distributer.
@lovelifts17363 ай бұрын
@@LGCTAh, thanks for the information. Full video on this lift will be coming at some point :)
@LucasTheTechCollector4 ай бұрын
That swing-door lift is very interesting - it has Spanish fixtures made by a company called ENOR: kzbin.info/www/bejne/eX-aZpaciNSBorM
@otiselevatorfan7264 ай бұрын
Dang, that fast for just 2 floors?! Also, I just absolutely love the frameless glass doors! You don't see that very often on elevators/lifts here in the US.
@lovelifts17363 ай бұрын
Yeah, these Gen2's do typically go at 1m/s which is a great speed for 2 floors. I agree, that door design is really nice :)
@Thebusguyplayz34 ай бұрын
Nice
@jasontelford10264 ай бұрын
There’s another ATC hand dryer which is in a shape a xlerator
@lovelifts17364 ай бұрын
Yes, called the Cheetah I believe. I haven't found one of those yet though :)
@jasontelford10264 ай бұрын
Yea there’s other hand dryers that are Xlerater shaped there’s ATC I which I mentioned, Abis, Levante, heatstone, generic and meny more
@lovelifts17364 ай бұрын
@@jasontelford1026Yeah, I found another yesterday installed by Anydry :)
@jasontelford10264 ай бұрын
@@lovelifts1736awesome 💯, have more hand dryers witch i think you haven't done yet They are Dolphin watch you can only find in Tesco's, Data, air fury lovair, Airdri Classic, Airdri Quarto, Hyco Cyclone, ATC premium blades, ATC puma, ATC Panther, I will have more for you soon hopefully
@jasontelford10263 ай бұрын
I have found more hand dryers that you have done yet They are Osliy, world dryer smartdri, phs airstream vintesse, Windsor (Xlerator clone) phs ultradry, Initial Machflow, Dan dryer, ATC jaguars, Dyson her blade 9kj