Refer to your MOBO MANUAL!! I recently purchased the B550 gaming plus and after reading the manual I’ve learned I’m able to clock higher speeds using 2 sticks of ram rather than 4 sticks of ram! 1DPC 1R max speed 4400mhz 1DPC 2R max speed 3866mhz 2DPC 1R max speed 4000mhz 2DPC 2R max speed 3600mhz
@williamtoppingКүн бұрын
I buy noctua because it's not how loud they are, but the sound profile is second to none. Trust me, EVERYONE prefers a louder fan with a better noise profile than a quieter one with a terrible one. Noctua do a great job of removing those annoying frequencies that drive you mad. The human ear perceives frequencies at different volume levels even at the same dB. Theoretically you could have a fan that is double in dB as another, but can sound half as quiet due to sound profile alone! This is what noctua do, and this is what you pay for.
@letssuperfuntime2 күн бұрын
What's better, this or the assassin king or assassin spirit?
@henrytoler50234 күн бұрын
4 pin PWM connector does not mean you will be getting a 4 wire PWM Fan . If only has 3 wires it’s still a DC fan no matter the connector.
@frostmafia13805 күн бұрын
i got the same one but in black, used a stock cooler on my r5 3600 this one keeps it way cooler, and it was very cheap, also no rgb, cuz I dont like it lol
@lucabenati16057 күн бұрын
Its possible to install vertical gpu support?
@HardwareForGamers7 күн бұрын
stock, no. You my be able to mod it to mount vertically.
@xavroy078 күн бұрын
how do you make the fan speed set from the motherboard apply to fans connected from the hub, whenever I try to do it mothimg happens amd the fans stay at 50%. whenever the hub is powered from the molex connector it just powers the fans and doesnt listennto the pwm connector from the hub
@NGreedia9 күн бұрын
It's definitely a nice looking cooler. Just wish it was cheaper, and came in white. The Nh-D15 g2 makes it look cheap though in comparison. The upcoming Thermalright coolers being mostly in the $35-45 range will make everything else like poor value.
@Elwsso10 күн бұрын
the ak400 or the thermal right you montioned ?
@HardwareForGamers10 күн бұрын
@@Elwsso honestly, which ever one is cheaper in your area.
@Elwsso10 күн бұрын
@@HardwareForGamers all of them for 30 dollar
@jonsnoff536913 күн бұрын
So I can adjust the fan speed of each individual fan header in BIOS? What if i have a splitter, will the header control both fans to be set to the same speeds?
@HardwareForGamers12 күн бұрын
the header lets you control the PWM/voltage, so yes if you have a fan splitter the fans will run at the same PWM/voltage (if they're the same type of fan then they will be at the same speed/RPM +/-, but if they're different fans they will be running at the same PWM/voltage which may not be the same speed/RPM.) typical headers can only handle 1.0 amps, so depending on the fan and how many amps it requires will limit how many fans can be on 1 header. hope that helps
@jonsnoff536912 күн бұрын
@@HardwareForGamers Awesome, thank you so much! It'll be my first time building, which you can probably tell by the question ;)
@DenVi8913 күн бұрын
Thank you for the video) TL C14C in theory should be quieter and more productive?
@HardwareForGamers13 күн бұрын
Behind a mesh panel, yes... in theory.
@hangukhiphop15 күн бұрын
LOL nothing shows up for me after the assisted setup what gives
@johnkimcarriedo163215 күн бұрын
guys am i the only one experiencing -1 rpm on my gpu speed card? the rpm definitely does change when i set it to manual control. but when i stop setting it to manual control and pair it with any other curves its just stuck at 40% with the question mark symbol. no other fan controlling apps installed except FanControl btw
@user-ov5ot6bd8p16 күн бұрын
How quiet is the pump?
@HardwareForGamers15 күн бұрын
I can't hear the pump (when at full speed) it the fan is over 30% PWM from 24" (600 CM) away. if that helps...
@user-ov5ot6bd8p15 күн бұрын
@@HardwareForGamers Thanks I'll be changing the fans anyway, my sole concerns is if I can hear a pump whine/noise as I sit very close to my computer
@pegasus947316 күн бұрын
Why isn’t my cpu fan being recognized
@tb10017 күн бұрын
Good review thanks!
@m.ceniza468818 күн бұрын
I got swindled into getting this case and have been regretting my choice ever since. Running 2 intakes up front with the exhaust fan
@TrueCROSSGaming19 күн бұрын
im lost my fan now have 0 rpm idk to hard
@HardwareForGamers18 күн бұрын
Can you set a manual speed
@TrueCROSSGaming18 күн бұрын
@@HardwareForGamers only one fan cna be changed so jus unistalled not much point for me lol
@edbailey623619 күн бұрын
i have them in my case it krrp myy cpu fan good
@lucasb629319 күн бұрын
its not identifing my fans
@i_Vex16921 күн бұрын
Is this cooler good for r7 5700x3d in games ?
@HardwareForGamers21 күн бұрын
Yes, should be fine.
@ni6ha21 күн бұрын
Thanks a lot
@the_ertuizg880222 күн бұрын
Why my chassis fan 2 speed and chassis fan 1 show n/a
@gravef1ghter25 күн бұрын
Subbed. Thanks for the review!
@QAT496928 күн бұрын
pulling has better heat disipation due to the physics of lower pressure = lower temp. e.g. air flow from high pressure to low pressure created by pulling configuration of fan, like from ambient air to inside of radiator fins, results in drop of temp, thus more heat energy absorbed, by then warmer air exhausted out by the fan pulling it.
@just_pufferfishАй бұрын
Doesnt work on laptops.
@frankjuuhАй бұрын
I love your voice.
@TahanBrudaffАй бұрын
How to change the color of rgb?
@HardwareForGamersАй бұрын
you'll need to download the motherboards RGB software
@TheJDmusixАй бұрын
ngl, i have been only getting issues with this aio. i've sent it back twice now. might be just a wrong one i got from them but be quiet lost my trust
@esteban1973Ай бұрын
Love this cooler. I thought I could get away with the stock AMD cooler but my Ryzen 5 7600 would quickly go to 95C. I got the black X 120 R SE and those temps went down drastically.
@opalazeАй бұрын
Hello, with this thermolight the average temperature was how many?
@spencermorgan2281Ай бұрын
What does it mean if you pair the GPU fans automatically and they sit at zero when not playing games?
@poison_blade5560Ай бұрын
Thank you this gave me a great starting point to my custom curve! Thank you!
@Lazo222Ай бұрын
Sir, what if I have only system 1? I have three arctic pwm fans daisy chained, and one three pin zalman case fan which came with the pc. I do not have option to control them separately. I control them all through sys 1, but I think this zalman one is not pwm so its running at constant speed.
@undeadking9386Ай бұрын
There r many company like asus, msi etc which two are best 7650xt
@HardwareForGamersАй бұрын
The fps will be pretty much the same with all 6750xt's the cooler will be the difference. Each company has high and low end 6750 cards, so there really isn't a best, more like good enough and NOT good enough.
@undeadking9386Ай бұрын
@@HardwareForGamers MSI gaming trio 6750 xt Or ASUS or ASROCK 6750xt Which varient is best and i should consider can u tell me please?
@theonerm2Ай бұрын
I have a Ryzen 7 5700x and it's not the 3D version. I also have an RTX 4070 Ti Super. I'm fairly satisfied with it but I definitely need a better CPU cooler so I can overclock a bit. I have an old Hyper 212 Evo that I lost the mounting parts to and I had to improvise to get it installed. It works but overclocking isn't an option like that.
@wjofreАй бұрын
Hey! I run a Ryzen 7 3700x with the Wraith Prism cooler, is it worth to upgrade to this one? Thank you!
@Laughing-PixelsАй бұрын
Thank you so much! Managed to grab 3 PWM PST for 16 euros.
@Mr371312Ай бұрын
I found that pull causes significantly less dust buildup, likely from the much lower intake velocity
@WisechoisegАй бұрын
Is it prebilt
@mj-lp5ebАй бұрын
It may also be that the voltage to the ram is too low, so it cannot run at full potential.
@MikeBob2023Ай бұрын
Thanks for the info & testing, Erik! 👍🏼 I'm replacing the stock (3 pin) rgb fans in an *MSI Gungnir 120R* case (for a new build), and I think these P12's are just what I need. I don't want rgb lighting on the fans and, while it's really nice looking, I also don't think the front panel on this MSI case will breathe very well without some help. /subscribe (I _am_ a Noctua fanboi, btw, but I'm also dirt poor. 😝)
@taiphvqlАй бұрын
very detail teardown, thanks
@maximoebenizer1919Ай бұрын
Thanks for the review, it seems the King is still the better purchase if you can find it cheaper. The RGB version is really nice, though.
@jfpss777Ай бұрын
Is a Ryzen 7 5700x3d (105 max tdp) with a Rx 6750 xt and a 600w gold power supply enough? My current card is a Gtx 1660OC that consumes a maximum of 125w, I believe that another 100w in a good quality 600w gold power supply would not be a problem.
@HardwareForGamersАй бұрын
TDP means nothing. The 6750xt calls for or recommends a 650w PSU. With that said, The Ryzen 7 5700x3d can pull upwords of 142 watts (PPT) and this 6750xt can pull upwords of 285w (would need to be OCed), so let's say 150w + 290w =440w. That means +/- 160w for the rest of the systems components (motherboard, SSDs, fans (fan controlers), and what ever else) which is likely do able...
@FeloO90Ай бұрын
what the best? Thermalright frost commander 140 Thermalright phantom spirit 120 se
@user-sn1ts9jq7eАй бұрын
I guess he didn't test anything. He simply drew graphs with low values. He drew the same low values in the test at 6:55. But in this test, low is better. He forgot about it.
@SrebyiАй бұрын
you actually helped me so much i was trying to sell my pc and the buyer was 20 minutes away and when i turned on the pc there was no display it was one of my ram sticks messing up
@HardwareForGamersАй бұрын
Glad I could help.
@sualehirfan2514Ай бұрын
How to uninstall this because it restarts my pc 😢
@HardwareForGamersАй бұрын
Should be as simple as deleting the folder.
@vile1926Ай бұрын
how do i reinstall my gpu, i cannot fit it back in and i dont want to take apart the case. im so fucking frustrated rn i hate pcs the littlest bit messes up and everythings fucked and its so dumb
@HardwareForGamersАй бұрын
The GPU is too long? Or is it that you can't seat the GPU in to the PCIe slot?
@bolulembut1132Ай бұрын
if i use push pull unfortunately the pull fan and rear exhaust case fan more like kiss each other (like stacking fan) is this will make an issue in future? or should i stick with push only cpu cooler?
@HardwareForGamersАй бұрын
Base on the temperature difference between push and push pull I don't think push pull is necessary.
@bolulembut1132Ай бұрын
@@HardwareForGamers so is it really okay to just use single fan (push) for cpu cooler? my enermax ets t40 tb comes with dual fan