So I do have to end sensor first?

Dexcom just released G7 in Australia. But sadly, the direct to watch feature is not enabled for the Australian market. This has been a great video, hoping I can do this one day soon.

How did you change the region?

Wearable widget no longer available for newer devices - not for note 20 5g. I have blose but can't figure out the share/follow app credentials. I'm following myself on the follow/ share app on my phone but that's not doing me any good after accepting the invite i sent to my other email. I'm stuck after seeing too the g watch app

Note 20 5g not compatible with app, but able to install on Watch6

Unfortunately Google brick it for wear OS5 can't use it on my pixel watch 3 All because google don't want third parties to sell you watch faces

Plus never discount a low reading, if in doubt do a finger prick test and treat accordingly. Before FGM and CGM it was a complete unknown to what was happening with glucose levels during sleep.

That is why the Libre goes on the back of the arm. Unless someone is a contortionist and sleeps on top of the arm, then no compression happens.

Junk

So you cannot use the receiver and the app at same time?

Thank you for this video.

I didnt even do it yet but i just wanna thank u , all we want is to have our numbers easliy a available at all times !

My understanding is that there is a delay where blood glucose levels in the blood take time to show up in the fluid beneath the skin on which non-invasive CGMs rely. This is why the watch in the video "lagged" behind the cappilary blood glucose monitor, showing reading that were the case a while ago as opposed to the test time. . It just takes time for the changes in the blood glucose level to show up in that subcutanuous fluid.

What Apple Watch is suitable for Dexcom one+ app? I want to get one, but idk if every Watch suitable

"Type One Talks" channel actually did a review on some Asian lower budget watches that claim to already be able to do this. He showed how inaccurate they are during a spike in blood sugar and also during a low blood sugar. If the wearer doesn't spike too high or low, the watch is more accurate but during huge blood sugar swings, it can't keep up with the measurements. Unfortunately, it is too risky for a real T1 to measure their BG and administer insulin based on these readings.

I find the direct-to-watch feature a little buggy. The process of connecting to the watch takes a long time. To make it worse, I alternately use 2 watches so I have to disconnect and repeat the process for the other watch. At this point, carrying the G7 receiver (or iPhone) is less hassle. Just a bit disappointing.

I use a cheap iphone se 3rd to Connect to Apple Direct to watch on iwatch se 2nd gen. Then I shut off my iphone, wait 10 minutes, and then connect the g7 to android phone, so I can use xdrip+ So I essentially have 2 live independent connections to my cgm when I have both phone and watch with me... Perfect situation for when one randomly disconnects. But my only problem with direct to watch is when I go running ( with my android phone and iwatch) and play my podcasts on my android phone with a bluetooth speaker, (I don't like headphones) the bluetooth speaker interferes with Apple watch G7 Direct to watch connection and it the cgm disconnects. Is it possible the bluetooth pods are the culprit? Great Videos By the way. I love your channel!!!

If this really works when it is released, it would be the technology improvement that would switch me from a lifetime android user to an apple user.

Cool shirt!

Thank you for this tutorial. I got this to work on my Galaxy Watch Ultra with my Dexcom G7. Also I am not using the Blose watch face. You can put your glucose readings on other watch faces as a complication if you just want to see the basic reading while using other watch faces. In addition you can now configure the Blose watch face in the wear app now.

Why has NOONE tested the finger monitor glucose meters. They have been hanging around for a while now. What gives?

Your right when I changed to 7 I had two fall off in 4 days. I bought after market lexcam over patches they work great

it is faking the measurements. There is a simple software in the watch that generates the fake glucose readings. some of the watches even ask you if you had a meal and when, so it can fake the number better. it is a crime. it even ask you the calibrate the device by telling it the real glucose reading...

I was hoping the smart watch would work😢

Thank you for doing this. You were the most helpful but I cant download wearable widget or blose app. Do you have any suggestions for the newer phones?

Oh wow i really needed this thank you ❤

I wonder if its a problem with the dexcom app itself. This spring and summer my G6 would lose connection with the app but the sensor wouldn't lose connection to the omnipod.

If I can't travel with just a carry on - forget it.

Tandem Mobi is only compatible currently with an iPhone

Not possible…you need to have a sensor and transmitter to measure an accurate Blood Glucose. Apple also had mentioned a few years ago by doing a retina scan to measure Blood Glucose. Steve Jobs waited too long and lost his life due to procrastination.

anything for the watch ultra?

Lots of money to be made in this industry, and I used Libre2 for monitoring until I got this watch... This watch is great for many but perhaps not for all people... It tells you when blood sugar is rising or falling, and it is a good indicator to be careful for those who are prediabetic. If you're not on medication or insulin and your pancreas isn't completely worn out, this gives a good indication where your blood sugar is at. Friend had libre2 sensor on and tried my watch at the same time: fluctuations where same frequency but off by about 0.2 points or so. That's close enough to be trustworthy for me... If you can't produce your own insulin, or your medication/insulin shots can cause rapid and huge changes in blood sugar, this is definitely not for you. Also, keep in mind different skin color might affect accuracy of readings

Since I'm a man, I just rip it off.

Hate to think how many thousands of people have fallen for this watch scam.

Word on the street is that since Apple lost a patent lawsuit for their oxygen sensor function that they may be re-thinking offering all the cool med stuff they were going to do.

Disappointed with zero guidance on setting up the required follower app with my Dexcom G7.

What happens when you change the sensor? Will the values be visible on the watch even after the change or do you have to do something special to make it work again?

It works really well for me

This works with Samsung Galaxy Watch Ultra and Dexcom G7. Thanks for this video. Great to finally be able to see the values from Dexcom directly on the watch.

Am I the only person that thinks all theses devices are a waste of time?

Also know that if you are wearing a CGM and your Bluetooth receiver or phone is receiving info and another person is nearby and trying to set up their CGM while in the room near you, their CGM may fail because it gets confused on which phone to attach to. HAD this happen! Sensor had to be removed and tossed.

Hi. Is it possible to use an other source ? Like Xdrip (no dex, no librelink) ?

Hi just love all your content. This video really hit home as I was diagnosed type 2 at 18 I am now 47. Sugars were never good. I took meds here and there. Living on bs 400 and 500/ Got pregnant at 28 then doctors were worried about my dibetes. Was hospitalized to get me on insulin regimine. I don't remember what year it was but I got diagnosed with type 1. Then was able to get the medtronic pump. I am now on Dexcom g6 and omnipod 5. I am due for phone upgrade. Been samsung for years but watching your videos i remember you talking bout apple being so close to watches taking bs without blood. I got the s24 but it is saying not compatible with omnipod. I believe if apple would be better option i can trade. I would love your input!

thanks for the review. Fingers crossed a reliable will come

The directions said it took 10 minutes per reading??

Regarding Wear OS 5. Blose 1.x shown in the video isn't compatible with it. There's a new version, 2.x compatible with that version. Wear OS 5 does however not allow watch faces to run any code, so Blose has been split into two parts. Blose will just be an app that provides complications, and then there id Blose watch face, also available on Google play.

well that wearable widget does not work on a galaxy s24 so I'm stuck again!!!!!!!!

Thank you for sharing, we have been using such a device for some time. But it is only now that I realized that Apple Computer/Steve Jobs already have that ideal years ago. While up to now, it is proven that non-invasive is not as accurate as the traditional finger pricking routine. We still use it heavily/daily because the results is precise enough for us to lessen our dependency on finger pricking to around once or twice a week. Hopefully Apple would make it even more precise in the near future.

Very good video, please could you write watch mark and model? Because link give a lot model?

Just purchased to monitor my two grandchildren who are both type one. My daughter has it, and I used it when they slept over and fell in love with this thing. I will now be able to monitor them without constantly running to their devices. Game changer!