That distro should disposed of immediately. I am assuming that “ground lift” switch is just cutting off the ground from the feeder. If that is the case holy hell is that dangerous. I would also hazard to guess there is no load balancing, which could lead to problem with newer smart breakers/panels. On a church install the electricians didn’t balance the dimmer rack so when it was powered up the “ smart” main disconnect would kill the whole building.

I’m in the Chicago area and worked a lot of rock clubs back in the day. Really interested to see what club it came out of. Little more than a handful of venues would have ran that size board. It’s probably on its 2nd or third owner. So many clubs went digital 10 + years ago.

Hey everyone, thanks for stopping by. Last week went pretty well doing this later in the day, so I'm trying it again today. Hope you've all had a good weekend full of gigs.

Hi! Please give me the factory firmware for the Wing Rack. Version 2.x. Is needed to update the external Dante card. On 3.x, it does not work in the Dante controller. You can download it by USB cable.

Hi! Please give me the factory firmware for the Wing Rack. Version 2.x. Is needed to update the external Dante card. On 3.x, it does not work in the Dante controller. You can download it by USB cable.

What if the Mute All Button on the Stagebox won’t turn off??

What version of Ipad is recommended? Im looking to buy a used Ipad just for this. Im gonna buy used, but dont want to go back too far and the app not work.

Literally that was my only problem haha omg!

The only problem I see with these is that they have no preamps so they come in at line level that’s kind of a deal breaker for me otherwise with a single data transfer XLR this would be awesome especially with the capability to daisychain them and then say hook them up to a wing

Omg the Roland M-400, so much nostalgia! I learned how to mix on that thing in high school back in 2015-2017. Good sound, I wouldn’t buy it today due to its lack of fully parametric EQ - low and high bands don’t have it. I would consider the M-480 since the EQ is fully para. Also, with the M400, the Remote Desktop app doesn’t work with today’s computers using 64-bit processing, and you would have to be tethered to the console via USB-B. The screen on that thing is killer and so clear though. The bright colors make everything so easy to read. We also had reliability issues with the 1608 stage boxes. Sometimes they just wouldn’t talk to the board and we would literally have to connect and disconnect the stage box from power multiple times until it would connect to the board. Thankfully that didn’t happen too often, but it is still concerning.

I'm using four of these for my computer and studio setup... They have worked well to protect from occasional power surges...

That's great. One (even better) solution would be interchangeable connections. One day i need 4 XLR Outs, another day i need 2 outs, 2 ins, another day i need a 3 in, 1 out. I know, adapters exist, but that would make the product even more versatile

Important: With the Dante modules Brooklyn II or Brooklyn III. There are 2 versions of the firmware for EACH chip type and you MUST flash the correct one (internal or external) for the chip type you own and where you instal it. This allows the networking ports on the rear of the mixer (or expansion card) to work as they should. You also MUST register the internal module to the Rack. That process is actually just enabling the internal slot for use with either the Dante card OR the upcoming WSG card. Done by holding the utility button while powering the Rack on and typing MOD-DANTE at the prompt. There are currently 6 possible firmware files from which to choose, 2 of which Behringer does not list. The LATEST Brooklyn III files are ONLY available via Audinate within Dante Controller itself (4.2.7.7) The two Brooklyn III version files that Behringer lists (4.2.4.8) are outdated and could cause problems. IF you are lucky enough to have a Brooklyn II card there are but 2 choices (4.2.3.13) (internal or external) and those versions are still the same as they were 2 years ago. The version Behringer calls AoIP is for internal use. SO if Brooklyn II, AoIP version 4.2.3.13 is what you want for INTERNAL placement. IF Brooklyn III, AOIP version 4.2.7.7 is what you want for INTERNAL use.

Woah, nice review. While I check its firmware, the website shows its latest (last?) version was from 2018. It seems do not have audio interface, I wonder how it will work with DAW? Also it does not have MIDI too! Is that somewhat outdated? Also, for me there is a problem: if my phone or laptop is connected to the mixer via wifi or ethernet, then, it disconnects from current internet/intranet connection then! So it's a closed world within this "app"! However, difficult to find alternatives at this price range.

Thomann in Germany state 7-9 weeks for delivery. Same for the Dante expanion card. Guess, I'll just have to be patient and wait for them to ship.

extremely excellent video! thanks!!

I’d like to comment that the two-finger side to side moving the fader rather than scrolling is not cool. It’s really annoying. Also, why can’t I find any manuals for these products? I’m having issues connecting and can’t find any documentation to help me.

Amazing video! Just a quick question on AUX channels. In my knowledge the X/M32 AUXs ch7&8 was stuck with the USB ins L/R. Are the routing for AUX channels for wing fully customizable?

AVB would be super useful.

Thanks those info! I know you answered questions about the headphones port at the back. But can the headphone port at the front be changed of busses/aux? Thanks in advance

Hello, i am seriously looking at this mixing rack. Do you know if we can control the faders with a little midi control like korg nano or akai apc mini with a usb/midi câble ? Thank you

Great info! Also can't wait for the next Ep of AV Deal or Disaster!

I’ll definitely send people to this Video !

Threre are several different Versions of the Brooklyn II Module. There is the BNII-01-064 wich supports 64 channels (that's the Wing-Dante's module), the BNII-01-32 (the X-Dante's original 32x32 module) and also a 016 and 008 version. A friend put a BNII-01-008 in his Wing and it works, allthough it supports only 8 channels :D So you have to watch out when buying Brooklyn modules. Of course there's also Brooklyn 3 (the module they use in most modern revisions of the Dante cards), but I don't know if there are any channel restrictions or not.

Thanks for answering my question and making these videos!

Hey everyone, going for the mid-afternoon premiere again today. It seemed to be a better time for everyone last week, so thanks for coming to hang again.

Is there a way to use both the XLR outputs and the amplified jacks output at the same time, but getting signal from different virtual sources?

Yes it is drain your money if its get inproper use. Most of the mixer guys try to push it beyond the mixer peaking and let the processor do their job and keep the output linear. The others who had any of knowing abaut the non-red zones they usualy sad: “so great, Thanx”

Looks like these still are backordered. I do have one + the Dante module on order though. 7-8 weeks seemingly.

This has it's purpose. Give me a big ass desk with certain channels to avoid for this and that and a bunch of expensive troublsome to wire outboard gear to mix on.

Is there any possibility to work in 44100khz rather tan 48000 khz for recording. My standalone gear recording usually in 44 and it's a lot of mess afterwards and gliching... Lowering sample rate in a driver will l lower cpu power consumption...

I had my 7506 headphones for years and I’m only realizing now that the ear cups are metal lol 😆

I appreciate you posting this video. This seems like a good solution for a rig that's going to stay in one space, but I wouldn't count on it surviving transportation anywhere.

😢EV 94 horns are 90x40 degrees, 64 horns are 60x40 degree. I own EV , but the price for this rig is crazy

I've always thought that if the kid who dies with the most toys wins, the audio/video mixer guys might well qualify for St.Peter's special entry permit.

Would love to see an updated video on this topic . In the UK we can get the X32 rack for £699.00 from Andertons . I was wondering the X32 rack would compare against the CQ series and other rack mixers.

GLD is a great Console, mixing on it almost every Day. Downside is that the internal battery will die after a few years and is kinda hard to replace but duable. Other than that, great console, for 1k I believe you hardly get anything better.

For some reason on PC startup my Quantum ES4 volume is wide open even though the settings are saved and look to be in the right place. I have to open UC, drop my main LR fader to the bottom and then raise it to my desired position in order to keep it from blaring. Upon hearing from support I uninstalled UC and the problem goes away. Reinstall and it happens all over again. Can you think of any settings I may need to look at to fix this? Great Video!

The GLD80 is great console for $800. They sound really fantastic, smooth, clear audio, great compressor. You can also add a Dante card and make it a real powerhouse of a console for live and the studio. It would rival Universal Audio interfaces. Onceyou understand the menus and overall design, it is easy to navigate for live shows.

big loomer

That Alpha system is very nice sounding. Thunder Audio out of Michigan had a seriously banging collection of that stuff and it would shake ya pants!! I still love the Nexo line any time I use it. Any generation of their stuff is legit!

8:49 Throw the wheelbarrow in and you’ve got a deal!

AES50 ... Dante nein ??

The Chrome vs. Black series of A&H GLD and Qu are the same but for the fader caps. I think they just found it looking a little fresher and they wanted to present something new physically to emphasize major improvements that came with a firmware update. The GLD is basically a Linux PC controlling the audio processing. The PC's battery goes dead sooner or later, but this can be fixed by the user, DIY tutorials exist. Basically it depends on the condition of a GLD if I'd buy it or not. It has the extra processing modules for free that you'd buy extra in the SQ series. It doesn't have the built-in recorder, though. Can do only 48khz and you need the older stage boxes with the DSnake protocol (which are still available). Actually when offered a GLD in good condition for below 1000€, I might get weak, even though I own a SQ5. I have a DSnake eco system, though. I think the GLD 112 is more interesting when in need for a console giving you the overview. If spending money isn't an issue, get a SQ console new.

Can this fully work with Apple Final Cut pro and Logic Pro. Please give me some hints.

Was hoping to see if how many channel inputs it supports if I connect it to a DAW.

i plugged it to my pc, install all the software , but there's a red light in the usb section in the interface. My pc cannot find it. Any sugestions? help me plz

I know you didn't talk about in the Nexo Alpha portion, but the Lab Gruppen fP 10000k 4 channel amps are quite interesting for 2700. I built many amp racks with these. Solid amps, great sound and light weight.

I saw Alpha and I click

I'm not really sure what this thing is - you kept referring to it as a mixer - is that what they look like nowadays or is this a recorder as well? It seemed to have effects built in? I'm afraid I'm old school - still using a Crest Century desk with knobs on. Ah - just seen another video on it - it IS a mixer!