This doesn’t work on my 07 Fat boy…I’ve just tried it with no luck….😢

Great stuff

Just got some on my 18SG and they sound flat with no amp

so what happen to black wire that goes to ground

nice video! im adding cb to my 2015 RGS. amazingly im using the same parts you did. I got every thing HD from the cb module to the cb splitter cable but after market stuff from the cable to the antenna. do you remember how big you drilled the hole for thr bnc connecter?

Saw your bike at the forgotten angles campout so I subscribed

Have you figured out how to adjust the sensitivity so it goes kff sooner

your so f*ing wide you can't see anything your doing

great video

Hi RoadGlide Rider, thank you for this great tutorial, liked & Subscribed💪🏼Ride Hard, Be Blessed 🙏🏽, Aloha Kenneth 🤙🏽

Very helpful I used your cool flow fan install video also. Does your dash light, light up also when the fog lights are on? I did the install but haven’t added lights yet but if I use the fog light switch I don’t see the dash icon light up like my softail did when adding fog lights.

Can't see a thing with your arms and hands in the way and little to no real time explanation of what you're doing. Also always a good idea to identify parts and tools (e.g. allen screw and 1/64th allen wrench).

This was one of the best videos in installing the big sucker just purchase it waiting for it to come back. Going to use your video as my guideline. Thank you. Keep the videos coming.

Your video is great and this is in NO WAY an insult aimed at you, but WTF is Harley doing? That entire assembly is the UGLIEST thing I've ever seen on any brand motorcycle, and I've been wrenching on them for over 40 years. Even the "junk" AMF years of the FL line had sleek sexy fender struts that stayed horizontal and flowed to the back of the fender. The fact that the exhaust (a NECESSITY) is held up by the bag guard (an ACCESSORY) is ridiculous when there will be a number of owners going "naked" with customized bikes. Hanging major components from a bag mount DESPITE having that crazy girder of a strut assembly? Also, why is the exhaust mount flared UP (along with the rubber block) to retain water around a standard bolt head, rather than the SAME part just factory installed with the turned edges facing DOWN over the pipe bracket? It's becoming obvious that the company just doesn't care about detail any more. If I had seen your video before buying one, myself... Well, there would have been some decisions to make. :))

Tried it numerous times on my 2011 RGC and can’t get it to chirp

You forgot to sand paper your nips

Hey how much the dealership charge you to flash the fan

Congrats on the 500 subs

You do need to speak faster.

Sorry for the stupid question: but if I installed the switch instead of the plug number 2, then where will I find the connector that controls this button? I took off both side covers and don't understand where to find them. Wanna connect heated grips or something. Thank you! 👍🏻

Will this work on a 2024 Rode Glide Limited?

Nice job. Could use a bike wash tho. 😊

Does anyone have a part number for the H-D vent kit, please?

I’m looking at putting these on my 15 Road glide. But the only thing that holds me up is on the HD website it says “• Mileage reinstatement is available through your Dealer” did you have to take it to the dealership for the mileage display or once you plugged them in did it automatically register it.?

Thanks for the Video 👍🏻

So mote it be.

I have a road glide 3 trike. Support bar for th e fairing needs to be removed and replacement brackets to support the fairing. just going to buy the smaller crash bar. Lines right up and is cheaper. Its half as tall. Bolts in where the top of the oil cooler is mounted. Save money. Looks great. No deleting anything.

Would it fit a Special with chopped engine guard?

Not modifying the harness with the supplied ground wire was not a good idea. The wire you pull out is a special dedicated negative side of the Control Area Network (CAN). It is not a true chassis ground. The ECM uses the CAN to send/receive signals to other devices on the bike. It might work fine for now but it can cause trouble later. If it puts noise on that special ground plane, It could mess up things in so many ways; leaving you to wonder WTH went wrong with the bike. On that note, I don’t understand why Harley felt the need to get the plugs involved (other than make it easy to remove and change the headset harness). If you cut the wire off the plug on the new headset harness and splice the ground wire in there, you get the same intended results.

Will this work on a 2017 breakout

Thanks man. Good job, really helpful no BULLSHIT geter done video!

I have 22 road glide limited i think you wat for light to com on then off light doesn't work like his i did it first time turned it off 2 sec.then back on light did come back on in 2 sec.i turned it off anyway then next time i waited light come on then off it worked Black/black,,, true death have a ñice day

On my passing lights there is a positive red wire to the positive post and a black negative to the ground post. Would I wire the red positive wire to the striped wire in the plug and the black wire to the ground black wire in the plug? The striped wire would give you power when the accessory switch is on, is that right?

Where'd you get the 'nose art' teeth vinyl from, please, brother?

Do you have the Harley part number?? i could not find them on the Harley web site

Hello, does the switch that was installed in the dash light up?

Works on a 2013 superglide as well. Thanks for the tip. Now I wont wake the.... hahahahah

Very informative

On acc# 2 you have a red, black and blue/yellow. Is the blue/yellow the lead to the switch? And could I wire passing lamps to this acc switch.

Why she looks so angry 😅

Maybe read the instructions? It says to start in the middle and loosely tighten them up starting from middle out.

Surprised you even did those since you admit to not being a "show performer". Anyways, you'll have those all dirty and scratched up in no time.

Great video!! Love that tip at the end!

You’ve got a filthy motorcycle.

Do any of the two ACC switches work if you only use the plug and not connect that single wire to the battery?

Good stuff! I’ve been looking at doing exactly this. The P&A manual says that the left switch assembly you installed won’t fit my ‘21 RG Limited. It looks like you used the one for the Electra Glide, is that right? What year is your RG, and can you list the part numbers you used for the switch and harness?

I’ve seen poor reviews for these lights on the Harley Davidson website. Apparently water gets in the lenses and fogs it up causing the lights to blow. How are yours holding up? I’m considering buying a set.

I enjoy having the CB on last three Harleys. I hate the company skimped out on adding them to the newer bikes.

😀Hey there from Middle Tennessee! Thanks for the install video.

/G\