Video was a blessing for my 5 year old who loves Super Mario. Saved me money. Time wasn't bad. Bent the pins and cleaned everything with rubbing alcohol. The motherboard was dirty from the factory. Cleaned it all up and put back together. Works like a charm!

Is the replacement oled or lcd I did one screen replacement in my life and got burned by it Original screen was oled and what I ordered turned out to be lcd

Would a normal hair dryer work too to heat up the CPU and capacitors? That's all I have at the moment.

I had the very same problem and I did manage to fix it because of you, so thank you! Somehow the top screen isn't working anymore though. Could it be that the screen cable (the other one) is damaged?

i got a bunch of faulty boards for the fat ps2 maybe i can fix them now

i love these types of videos, but theyre almost always shorts. long form is where its at lets gooo

What is the wire you used In the video?

Just wanted to say I appreciate you giving the measurements and how to do it on the computer. I know it’s simple, but that’s when it’s the most difficult for me. Was sure where to change it so it prints at certain millimeters.

Im having the exact same issue with my psp3000 board. I think that big chip might be power management, which i believe is the DA9052 ic chip.

fantastic quack….you are a life saver

looks like I'm one of the unlucky 40% haha. it's fine though, I know where to get a new battery from, since I needed one for an SP with an expanded battery.

Mine works for a bit and sometimes for hours but when i load a heavy game it dies So i think this will work I remember laying ice bags on and under it and this gave it a bit more time before it dies Im almost certain that changing the thremal past will work

Man this is a good video but to do it yourself seems a bit much it feels like I’m going to kill something on my system and have it not working at all

So I have one that the light goes off when plugged in. It will not come back on if I move the cable head around. However, if I plug and unplug the charger about 6-7 times the light will eventually stay on and charge. I do have a speaker that’s not as loud as others and from researching it seems like this may be a capacitor issue. Could this also affect the charging circuit? PS: I have installed a new battery and still have the issue. I have also cleaned the contacts within the charging port with ipa.

So mine does this with a new battery installed wonder what the issue is. I also have a speaker that isn’t super loud. With this I know it could be a capacitor issue I wonder if this could also affect the charging circuit. Does anyone have thoughts on this?

Nice ! Can’t wait to see these tools in action in the next few videos ! Keep it up mate

It's becoming more common for these to fail. No surprise, the system is approaching 25 years old now. Having a schematic is greatly helpful but of course those are hard to find since they rarely get leaked.

Not late this time😈

I think the large chip is the custom MIPS IV allegrex unit LOl aka the C.P.U

Is it the same fix if the left shoulder button won’t press in at all?

Can you play it while charging?

What happens to a gamecube that boots into other games but fine but breaks on this game? It reads fine, it just won't boot. it seems to be the only game to be like that. is it the disc? It looked relatively unscratched.

This didn't work for mine.

The same thing happened to my 3ds when i try to unfold it

Hi! I have an issue that i cant find any solution to, mainly because this isn't the most popular xbox now- my controller works during games and on the startup screen, however whenever i try to watch a movie it's unrespondive. Is there any way to fix this?

What do I do if it’s the game cartridge? I’ve tested multiple games across three different consoles. Literally just the one game. I hit it with isopropyl alcohol. Still didn’t work. Hit it with brass cleaner. Still nothing. 🤷‍♀️

Do more 😍

Thanks for the tutorial helped me alot especially the part where you have to fumble the ribbon cable through the smal hole. Now my 3DS is working again thanks again.

I’ve found one of these models on the top of someone’s garbage pile years ago when they were still hot, it was soaking wet and missing the disk drive. Brought it home, dried it out and had the same ylod. I wrapped it in aluminum foil , put items to hold the chips in place and stuck it in the oven. Ran like a dream for years.

Fuck my life up side down. My cousin and I have been pulling our hair out until you mention the magnet. Did your 3m trick and she is a beauty now

As always, with love from Russia. I'm glad you finally got a sponsored video! ❤

Air Capsule seems like a handy tool instead of busting out my whole ass air compressor every time. I wonder if there is a similar tool that just plugs in instead of needing to charge.

Ok using my multimeter. If i probe the brown and white - i get 24 VAC. If i probe white and black - i get 110 VAC. If i probe Brown and Brown - i get 0. Does this mean the Transformer is OK? I'm getting NO lights or power to the system or the humidiostat. I suspect the board is bad but i need some help

So I just need new thermal paste

But I have tried all this 😢 but still showing red light

Thank you for this video!!! it helped me repair my ps1, even though it wont read discs or controllers!!!

Nice video that’s still helping out today! Kudos to you for working all the way through the problem! It’s always suuuper gratifying when you see something to completion 🤙🏼🤙🏼🤙🏼

I did that to mine. First time lasted over six months and last time lasted like a day. Did it like four times until I broke the disk drive ribbon cable connector xd. It’s been like five years ago and haven’t try anything new, since I moved to mobile gaming.

I bought a new battery but it still won’t charge, don’t know what to do now

Amazing video! A few months ago I found an old psone in my grandparents place and was delighted to see it still worked and ran games. The thing was dirty so I cleaned all the parts and reassembled and it stopped working. I gave up on it until I saw this video which inspired me to investigate further. I now see the problem, the button that you manually press at 0:57 isn’t there. I’m having trouble finding out what this piece is technically called so I can order it. Do you know where I might be able to find the name of it?

Mine is the exact same way is there a way I can send it out to you

Got the same issue here as well, gonna give it a shot tonight! Thanks!

You can also just simultaneously plug it in powering it on and then shut it off again, it will continue charging

This worked, you're a saint

Bor thanks a lot 😊❤ it worked

Does the heat water not affect the box colouring?

I hope someone can use this information to find a fix for this.

This worked for me, thank you! I'm very grateful, I thought my gameboy was dead and feared I'd have to sell a kidney to buy a new one. Been wanting to play old GBC games again, and now I can.

didn't work with my ps3

you da man