6 ай бұрын
9 ай бұрын
9 ай бұрын
Пікірлер
@Tesorosaprofunidad Сағат бұрын
Buy or Pass
@phrunt Сағат бұрын
So far so good, I'm still learning it, I've only had a few hours behind the wheel. Very easy to use though, I expect my wife to want to steal it off me.
@yongliangzhaao5055 Сағат бұрын
专业测试员！
@phrunt Сағат бұрын
First time using it, learning as I was going :)
@kenhillary8108 5 күн бұрын
OPEN OUR OWN BANK !!!!!!!!!!!!!!
@fishinbite 8 күн бұрын
Interesting tests. What is your consensus? Do you think the E1500 is a good machine for those stepping up from VLF to PI machines?
@phrunt Күн бұрын
Yep, it's a great jump from a VLF especially in mineralized or hot rock soils.
@fishinbite Күн бұрын
@phrunt thanks! do you think it's worth spending more to get a second hand 5000 or new 6000? Being a hobbiest just not sure where I should head next.
@incognito861 12 күн бұрын
Nice video. I have an algo force and all I can find is rubbish. I’m in the wedderburn area atm. All I find is Small little pellets, wire, nails etc etc. No gold ever. I go slow , I do everything I’m meant to but no gold. I’m about to give up. I’ve spent weeks looking. All I find is rubbish!
@sjeanphilippesanchez1872 16 күн бұрын
hello, can you please do a depth test in the air or on the ground for the 18 inch detection disk coiltek mithtek , and if possible relative to the 11 inch or 9 inch detection disk . Thank you in advance for your effort
@alibefair 20 күн бұрын
The important thing is that the places where the detectors are tested should be mineralized underground. It is an undeniable fact known by professional detector users that open air tests are completely misleading. Like the comparison tests of the detectors made in the KZbin video below. I think there should be a comparison test with Minelab detectors in order to see the performance of the Algoforce e1500 in its fullest. Please let me know if I am wrong because you do not have such a test video, is that correct? kzbin.info/www/bejne/bKjWi4OVl9GUj68feature=shared
@jweleyalzintanlibya 21 күн бұрын
U can hit it by any coil It between 45 to 55 cm
@ckwicko 28 күн бұрын
I really wish they had made the X-coils submersible, they would smash it in the rock bars of shallow creeks.
@phrunt 28 күн бұрын
yea, they should make a waterproof coil at some point, especially in the smaller size like 8 or 10"
@RussellCrafter-r1g Ай бұрын
Air test don't prove anything.
@phrunt Ай бұрын
except how stable the detector runs and if it will hit on targets in the first place, a detectors sure not going to hit a target in the ground if it barely hits it or doesn't hit it at all in the air.
@ronaldmargetts7812 Ай бұрын
Great testing mate,very informative with a good variety of machine,love the no response on crap from the E1500
@Eustibaikula709 Ай бұрын
Toda la gente que tenga un Minelab Manticore y quiera sacar el máximo rendimiento le recomiendo que la compre ,hace más de un mes que la utilizo y es una auténtica maravilla .Muy sensible a objetos pequeños y poco profundos y ultra profunda en objetivos más grandes .El único problema su peso cuando detectas más de 3 horas sin arnés el brazo se cansa bastante .Con el nuevo sistema de nicho de sujeción de la bobina Mythtex de 18 pulgadas Coiltek ha hecho un gran trabajo .Mi puntuación es un :10
@davidzirkel2145 Ай бұрын
I really enjoy your enthusiasm
@Urge38 Ай бұрын
Is that a Non-conductive lower shaft I see???? If so, has it made any difference that you can tell??? Mines on order
@phrunt Ай бұрын
yes, it's a non conductive shaft from SteveG's detector rods, it's great, detectors more stable, and no response from the shaft now moving the coils position around. I threw my standard lower shaft out I like the non--conductive shaft so much.
@skulldiver Ай бұрын
Definitely not a coil for my environment but damn... That's impressive how it reacts on such a small piece😮
@phrunt Ай бұрын
yea I was surprised myself, I will likely never use it for gold detecting but to see such a big coil be that sensitive to tiny targets is pretty cool.
@ronaldmargetts7812 Ай бұрын
Great demo,gives me a lot of confidence in my 6000 now 🙏👍
@farhadsofiqaderi Ай бұрын
Hello, what is the price of the device, how deep is it
@farhadsofiqaderi Ай бұрын
Hello, what is the price of the device, how deep is it
@phrunt Ай бұрын
www.algoforce.com.au
@mudripper2367 Ай бұрын
Thanks Matey the neignbours must be happy when you filmed at 6am on a Sunday in front of their yard!!!!Speak soon!
@yongliangzhaao5055 Ай бұрын
看来我选择E1500 是正确的， thanks ! 视频我已经下载，并对中国市场宣传，，
@yongliangzhaao5055 Ай бұрын
太棒了，西蒙， 我的MK2 也刚刚收到，，最近也在测试！！
@Sergium46 Ай бұрын
do ypu know when algo will sell in europe?
@phrunt Ай бұрын
No idea sorry
@davidzirkel2145 Ай бұрын
WOW that’s incredible
@tonybaker7242 Ай бұрын
Thankyou Simon .
@tonybaker7242 Ай бұрын
Thankyou Simon .
@tonybaker7242 Ай бұрын
😇🥰
@aprospectorsamateurhour2190 Ай бұрын
Chalk and cheese for emi affects, good comparison, thanks 👏
@tonybaker7242 2 ай бұрын
All good Simon.
@phrunt 2 ай бұрын
Thanks Tony.
@thebushbunker 2 ай бұрын
Wanna sell that proto bowl?
@phrunt 2 ай бұрын
not a chance :)
@DetectorMods 2 ай бұрын
What sizes are the gold bits?
@phrunt 2 ай бұрын
smallest is 0.04 of a gram, I thought 0.03 in the video but I was wrong, its 0.048. I should get my butt into gear and weight them, the biggest is 0.26 of a gram, but its kinda flat.
@DetectorMods 2 ай бұрын
@ very good sensitivity with that sized coil, what about depth on larger lumps?
@phrunt 2 ай бұрын
@@DetectorMods Not sure yet, I've only just started experimenting with it, a good sign is it was picking up my phone at the height of my head when I was filming the next video I did under power lines so might be still promising, I think it won't be as good as the standard 20" CC on deeper bigger targets as its tuned for smaller gold, but looks like it will still have pretty good depth on bigger stuff, I'll have to keep experimenting to see, I've only just started using it
@DetectorMods 2 ай бұрын
@ So many prospectors love these xcoils so it should perform well.
@tetecacabral6964 17 сағат бұрын
Bom dia! Simon. Eu descobri de que, o 7 com estas bobinas é muito melhor em relação a ouro minúsculo em solo altamente minerelizado. O 6 só é muito bom pra ouro minúsculo em solo moderado, em solo severo, o 7 vai pegar muito mais ouro minúsculo com uma x coil de 8, do que o 6 com uma bobina de 10x5. E ainda, sem contar que vai muito mais fundo.
@basslinebennyb8543 3 ай бұрын
Man I want one of these guys..
@microwave-vh2uc 4 ай бұрын
Mate how does it compare in an air test with the gpx5000?
@phrunt 4 ай бұрын
On small gold, it easily beats the 5000, on larger bits further from the coil the 5000 wins
@microwave-vh2uc 4 ай бұрын
Its like the QED. If you turn off ground balance then it has similar sensitivity to a gpx5000 Turn ground balance back on and its not even close to a gpx5000. In the goldfields you cant run without ground balance. Me thinks ML must have a patent on their ground balance system that doesn't loose depth like these other detectors. For reference with a 14 inch mono coil laying flat on mineralized ground my gpx can detect my gold ring even when held 750 mm above the coil. The QED in the same test less than 300mm
@phrunt 4 ай бұрын
Yes, the QED was much deeper with ground balance disabled, the Algoforce is also much deeper with GB disabled, in our soils here in New Zealand's gold fields I'm very lucky and can run with GB Disabled looking for gold, the downside is we mostly only have tiny gold so it's lucky I can run with the extra power of zeroGB :) You'd be surprised, the Minelab GPX 5000 also has a way to turn ground balance off, and gets far more depth than than with it's ground balance enabled too, coils and relics timing is one way, there is also a GB that you can manually turn off. The Algoforce can work in very tough ground, high magnetite and black sand very well, it handles severe hot rocks, in this way it's much better than the QED, more sensitive too. Minelab detetctors are loaded with patents though and all other brands have to work around these methods,
@microwave-vh2uc 4 ай бұрын
@@phrunt so as far as depth is concerned (large targets) how does it compare with a gpx5000? even just in air on say a 50c coin?
@scoopingdutchman4325 5 ай бұрын
Next option ……a magnified anti reflecting glass for the unreadable tiny display that is overcrowded with icons… who needs a display when you have to dig it all.? It is a lot of money I guess…..
@phrunt 5 ай бұрын
The display enables it to be more than just a dig it all machine, so turns it into a true multi purpose PI not just for prospecting and the screens really easy to see, even in bright sunlight.
@BM-wi9kt 5 ай бұрын
Wish you luck with that.they are a great leadshot machine.
@Andysfishing 5 ай бұрын
Im not sure if you'll see this, but I'm curious if you rate the 12" cc xcoil over the 14" standard coil for the 7000?
@phrunt 5 ай бұрын
I've done some videos comparing various coils for their sensitivity on shotgun pellets to give a demonstration of that, the 12" CC was never released, the 15" CC being the smallest, and it's significantly more sensitive and deeper on small gold than the standard 14" coil. The Concentric coils need more of an overlap in swing though as the deepest part of the coil is the center of the coil so you have to slow down a bit.
@Andysfishing 4 ай бұрын
@@phrunt Thank you for the reply. That makes sense. Maybe one day I’ll try the CC coils.
@НаймансВостока 5 ай бұрын
Что за аппарат?
@phrunt 5 ай бұрын
Algoforce E1500, a new detector to market this year.
@НаймансВостока 5 ай бұрын
А катушка X-Coils?
@phrunt 5 ай бұрын
@@НаймансВостока The X-coil is no longer available, they stopped making coils for the earlier GPX series which the Algoforce uses the coils from. The coil is a 10" fully spiral wound coil.
@Robert-t1p 16 күн бұрын
Could you use a dd coil on the algoforce.
@danielflinn3571 5 ай бұрын
Thanks for sharing
@brunicol2090 5 ай бұрын
Iron id ????
@phrunt 5 ай бұрын
Only conductivity of targets, so iron can still come up in many places depending on the size of the iron. It's more suitable if you know the ID of the target you're looking for, for example a particular coin.
@thebushbunker 6 ай бұрын
Geez I want one, so can it use gpx5k coils?
@phrunt 6 ай бұрын
yes, it will run GPX 5000 mono coils.
@shanesstuff1321 6 ай бұрын
awesome mate thanks for the video
@phrunt 6 ай бұрын
No problems, it was just a quick demo I filmed when I first installed the new firmware to give a bit of an idea the depth difference in mild soils once switching to the new ZeroGB mild soil mode.
@henniebouwmans7879 6 ай бұрын
Show us the what to pres the pin pointing mode thanks ?????
@Metaldetector.lovers 6 ай бұрын
Coil mono? Coil double?
@phrunt 6 ай бұрын
It is a mono coil.
@phrunt 6 ай бұрын
Air Test ID of the coin is 74.
@Brandanmayhew 6 ай бұрын
Gday phrunt? Ive read a lot of your posts/comments on the forums when ive been looking for some info. Now i know that you've had a hard time with your 6000, and in saying that, i was wanting some straight up no BS opinions on if its worth getting one. Id be getting it 2nd hand seeing as they have gone up a grand, but as far as an overall detector? I know its good on small stuff at depths and thats why i want one, but ive read a lot of negatives including; they arent good in hot ground (far too many hotrocks) and also the number of problems people have had with them. Im running a 2300 and a 5000. Im doing well atm with the 2300, and going over ground i can with the 5000 with 11" afterwards. The 2300 has no issues with powerlinea or Hot rocks ive noticed. I do pick up the odd hot rock every now and then but they are the targets i get the least of now i think about it. The sdc will get them at 0.03 0.02 so its definitely good at getting the tiny stuff. And for depth my 5000 with a 11 and 14" will obviously suffice. If i got a 6000 it would then be used as the main detector BUT when the ground is too noisy thats when the 2300 and 5000 will do its job. Am i right in saying this? Or can you get the 6000 to work well in the worst of grounds? And im not a fan of changing settings and losing sensitivity and depth just to use in centain scenarios, id rather have different detectors for that. I hope you understand what i mean. If i get the 6000 id get the 10x5 and just use the 11" it comes with. I dont think any other coil is really worth getting. Maybe the 9"? But i think the 10x5 and 11 will do the job fine. Unless the standard 11" isnt the best around powerlines for example, then I'd think about the 9" or the 14x9. I dont think you rated the 14x9 that great, and said the stock 11" is better. From what ive read and watched it seems like the goldhawks are the go to coils over the NF. I just dont want to buy an expensive coil that i dont necessarily need. Thanks
@phrunt 6 ай бұрын
You're on the right track, the 6000 is more sensitive than the SDC and certainly the 5000, it will find smaller gold, but does suffer from more hot rock problems than the SDC and 5000 that's guaranteed. Quality was dismal on the first year or so's release of the 6000, they've improved now, if you're buying second hand expect to send it in to get the EMI problem resolved if the owner hasn't already, also it's likely the owner is selling it as they're not happy with it, the reasons for that could be associated with all the faults the units have had, reliability was very poor. Newer ones have had from what I've been able to see most if not all of the problems resolved, even the earlier coils were bad people had 2 or 3 replaced, now the newer coils don't so far appear to have that problem. The 11" stock coil is great when you've got a good one, but makes for an unstable detector if you've got a bad one, and I think most who are unhappy with the 6000 are unhappy as they've got the EMI problem and or a bad coil, they're the two common issues. The coiltek 10x5" is great, the 14x9" not as sensitive as the 11", but runs nicely and more stable. I'd give the NF coil a miss, the Coiltek's better I think, especially if you're chasing smaller gold. Now after all the negatives, the 6000 is a great machine once you've got a good one, really sensitive and has good depth on the smaller stuff, but does suffer more with hot rocks. It comes with the DD coil for use around power lines but the 10x5" does pretty good too being smaller.
@housejunametaldetector5413 6 ай бұрын
That really good
@Robert-fs1pb 6 ай бұрын
When you reject nails you loose sensitivity to small gold.
@phrunt 6 ай бұрын
Discrimination is bad for small gold
@MrGsani 6 ай бұрын
All Whites detectors as far as I know use metalic shafts. As long as they work tight or stationary to the coil then I don't see the problem
@phrunt 6 ай бұрын
Whites use Fiberglass. Please watch the video from the Fisher metal detectors engineer explaining the problem further, kzbin.info/www/bejne/oF6QlniBbLeGmpY
@highanddryful 6 ай бұрын
why did you manual ground balance? The auto ground balance should be running continuously in the background mode.
@phrunt 6 ай бұрын
The Algoforce doesn't have auto tracking in that way, yes its tracking the ground, but you have to manually balance it, the tracking it does only tells you when you need to balance.
@highanddryful 6 ай бұрын
@@phrunt ah, thanks for clarifying.
@henniebouwmans7879 6 ай бұрын
Its hard to hear the vol
@phrunt 6 ай бұрын
Sorry, yes it was a very windy day, there are other videos people have done now showing it's performance in a similar way. I should get around to recording a new one myself.
@phrunt 6 ай бұрын
This is a must watch video on the problem from a First Texas (Fisher metal detectors) engineer, Carl Moreland demonstrating why I care so much about this problem. Https://kzbin.info/www/bejne/oF6QlniBbLeGmpY And a follow up video he's also done explaining the problem kzbin.info/www/bejne/fqq0qYeImruVhrcsi=nDXFuaKt17Lf0iQB