great stuff. . .thank you

What kind of Chinese bullshit is this?!?!

Hello! I have this exact part and it started to creak while pedaling. What can I do to get rid of the creaking? Thank you!

Hi, one thing I don't get it. It says that BB92 is the same as BB86. How does it work to adjust for a 86,5 mm bottom bracket Vs a 92 mm ? It's being sold as they can be used in both, both but how if they have different cup lennght? Thanks

hi is it advisable to have 5 mm spacer installed under that top cap. thanks

3:10 use grease, less creaking sounds

0:21 really confusing!! you could point with your finger!??

Can this be used in a T47 bottom bracket in a steel road bike (standert triebwerk disck) i need to move de crank axle to avoid internal cables on the bottom bracket because this bike is designed for internal routing but they havent considered the mechanical groupsets (housing hits the axle and wears it because you cant mount the bb shel)

6:16 - the paint is chipped and the frame inner diameter looks bent? an impact flare tool to hammer out the cups is a better method for this bicycle frame?

Using torque wrench as a breaker bar... such a bad idea. What other bad ideas are here??

Looks awesome

To add to the other comments... wrong orientation.

Breaker bars aren't expensive man, it's not great having a teacher advocating abusing torque wrenches lol

catridge bb what size you use ?122mm ?ok for bmx ?

Very Good Thanks

Great instructions but what did it accomplish? Was the goal more power on inclines?

hadn't considered the facing of that and likely would have just pressed them in. good video ]=

This bike was really easy to assemble kzbin.infoUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA and required very few adjustments out of the box. The wheels did not require any truing/adjustments. The frame had some small scratches, but nothing major.I did replace the seat though - the seat it came with was very uncomfortable. The tires need to be re-inflated every 4-5 days, but this appears to be quite common for the narrow 700x25 tires.Overall, in my opinion, this bike looks and rides like a much more expensive bike.

Good lube to the chain, I’d chuck it!

5:36 - On the contrary, plastic nuts need torque wrench more, because they require less torque and are easier to over torque. Most plastic ones accept up to 30 N.m.

How does it work with a frame without an integrated headset groove?

man I was just looking for this option...anyway would this work with a sealed bearing type? thank you

1:11 thanks for the video any idea if the bolt dont come off ? I been trying for many days so far. I bough an older Giant Trance X3 and i just cant remove the crank bolt :(

Has anyone tried one of these on a carbon frame?

This does not work for retraction of a sram dub pf30 (83mm). Installing is ok.

crown race opening should be at the back side of the fork. helps with moisture .

china bike

Why would you put a shitty square taper bb back in the bike dude. 68/ 73 et . wow

Good way to break the bike stand

A Refreshing Woo-Hoo!!

If the adjustment range is ÷- 2.9mm, how does that translate to tooth changes? Is it 2 teeth on a chainring or x teeth on a cog, etc.

Why the cloves now the chain is al hairy

So one could just use the old bearing cups that are already on the bike? I have the same conversion kit shown in the first method and they came with new bearing cups... in other videos on youtube they would knock the older cups out.

Susah mencari barang nya

Great video. On an Octalink, would you put anti-seize on the spindle before installing the cranks?

When I tighten the bottom bracket the spindle can not move, what could be the problem?

Tried this and stripped both sides

Donde se puede comprar esa herramienta

Wet

klau beli as bb yg seperti di vidio itu kemana tlng info yaaaa.....

klau beli as yaaa aja dmn......

Even though it’s called “single speed”, will it work with a rear wheel 6 gear free wheel cassette setup?

Is this applicable on a mid bb?

is that 53t?

Buenas tardes cuánto cuesta ese equipo

Is that a hollowtec 2 crank arm?

Looks easier than it actually is. It takes a lot of patience and accuracy.

Hi, can I use this to BB86? Thank you for the answer.

So this fits any bike? That’s dreamy.