![One Of The BEST Dual Chambers Yet! - APNX V1 Dual Chamber Case - Unboxing & Review! [4K]](/img/o.gif)
Пікірлер
@SneezingEagle 17 сағат бұрын
Left on spread lol
@jordanash 17 сағат бұрын
FINALLY someone mentioned it
@Erekt0401 Күн бұрын
Can i pair it with r5 7600 and 7800xt?
@jordanash 20 сағат бұрын
Yep!
@sophietarafiona Күн бұрын
Hi Jordan, Thanks for your review, I liked and subscribed. But I do still have a (for me) rather urgent question if I may ? I am about to order two of these cases and what is still holding me back is the question if I am going to need Phanteks premium GPU riser card for vertical and diagonal mounting (I only go for vertical) or if perhaps I can do without, but what do I then really need to have ? I was fortunatel enough to have gotten my hands on a Nvidia founders edition RTX4090 (still unused in it's box in my mancave), but that founders edition has one fan on either side and won't the Phantek premium GPU riser then block one fan at least for half the diameter of that one fan ? That would seem counter productive then. And again, you say I technically don't need such a GPU riser holder thingy at all with this G500A case ? The Nvidia FE RTX4090 is a 3 slot card by the way. Could I bother you please with this ? I can get the cases a bit cheaper because of black friday, but the premium riser card is a solid 100 dollar/euro here. What do you think based on what I described ? Thankls in advance for any reply. - Cheers, Marc
@jordanash 19 сағат бұрын
Hey Marc. You're welcome, thanks for subscribing and liking. So you could look at a riser from NZXT, those have a diagonal support and the top fan should clear that without issue. But if you're okay without one, then I wouldn't worry. I expect you'll get better temps without too.
@diegomartinezariznavarreta1855 Күн бұрын
do you need the Razer Chroma Addressable RGB Controller or the Razer PWM PC Fan Controller to use it with the synapse and controll lights and everything?
@jordanash 19 сағат бұрын
No, the fans connect to the pump and daisy chain.
@SeishinTekukutsu Күн бұрын
Currently torn between b650 livemixer and b650 Aorus Elite Ax v2 rn since the v2 is on sale in amazon. Which board would be the best option?
@jordanash Күн бұрын
I can't really tell you as I've not used that one. I'd just google one vs the other and see what best fits your needs. That's all I could do to help so you just as well do that yourself.
@abdulrhmanalzaher 2 күн бұрын
I'm planning to order either this or ASRock B650m pg riptide wifi, they are almost the same price so which one would be better?
@jordanash 2 күн бұрын
I can't really tell you as I've not used that one. I'd just google one vs the other and see what best fits your needs. That's all I could do to help so you just as well do that yourself.
@KapteeniKlamydia 2 күн бұрын
So there are other review saying that you actually CAN lock the backrest to any position. are you missing a lever or something? Seems very weird for a chair in this price range to miss such a basic option.
@jordanash 2 күн бұрын
Can you give me a link, please? I've tried everything. It may be that they've added it since as this one is one of the first samples (It took me a long time to get around to covering).
@lucasalmeida8518 2 күн бұрын
Do i Need that extra 4 pins for the cpu? My psu only has the 8 pins cable
@jordanash 2 күн бұрын
Some boards want it, some don't. I expect you'll be okay, but it might be time to upgrade your PSU as going from the single 8 pin I'm guessing it's +10 years old.
@arthurs9374 3 күн бұрын
Where the benchmark
@jordanash 2 күн бұрын
It's in the related video
@scopegaming8857 3 күн бұрын
I currently have a Be Quiet Pure Base 500Dx. Does anyone know if the H6 Flow is better in terms of thermals and acoustics? I will be using Noctua case fans and a Thermalright air cooled CPU cooler.
@jordanash 2 күн бұрын
Thermals for this are in the video but it's hard to tell without using the exact same setup inside it. If you're using Noctua fans you're unlikely to hear them unless you're thrashing the system.
@scopegaming8857 3 күн бұрын
Excellent review. I will be using an air cooled CPU. I've read it's not recommended to have bottom case fans because it raises the CPU temperature. What would you say is the ideal fan configuration? I'm thinking 3 intake at the front(ish), 1 rear exhaust and either 1 or 2 exhaust.
@jordanash 2 күн бұрын
As in the video really, keep them all the same way in and out.
@stefantudor7494 3 күн бұрын
What a ugly case… the previos case is a way beautiful! The new case is a dust magnet
@jordanash 2 күн бұрын
The design is rather different. The spacing in the gaps stops dust without needing filters, the Cooler Master case I use daily has it and it does a great job.
@Donbros 3 күн бұрын
Really intrigued if asus or gigabyte is better this time. I usually use asus or msi mobos but have gigabyte gpu
@jordanash 2 күн бұрын
Gigabyte have done some good boards, ASRock are really making waves though I wouldn't discount them.
@Phillip_Kilby 3 күн бұрын
Armory Crate is a buggy pile of junk. ASUS has lost me sadly and I was a hardcore ROG crosshair user. Too much emphasis on bling and not enough on performance. Yet ironically, half the time their Armory bling software fails even doing that...
@jordanash 2 күн бұрын
That's a shame too, the Crosshair boards are great, but I understand
@rlsrxr 3 күн бұрын
What fanse dose the pc come with and how many(Name of the fans)?
@jordanash 2 күн бұрын
I said in the video, please watch first. 4:20
@Lewish-nu5zx 3 күн бұрын
honestly still scratching my head trying to find a decent and affordable Z890 MB for the U7 CPU any ideas?
@jordanash 2 күн бұрын
There's very limited choice for something "affordable" really, this is one of the best value boards I've looked at yet though.
@gsm_liv8980 3 күн бұрын
I've checked my area and recently the MSI B650 Tomahawk is out of stock everywhere. Is this board an adequate substitute, since many says that it's as good as the MSI board?
@jordanash 2 күн бұрын
Yeah, this will be okay instead.
@Cloudorwhat4996 3 күн бұрын
😙😙
@xMangekyo 4 күн бұрын
which is better this one or the Z890 tomahawk?
@jordanash 3 күн бұрын
Not looked at the Z890 Tomahawk I'm afraid. I'd Google one vs the other, that's all I could do to help but you just as well do that yourself.
@xMangekyo 3 күн бұрын
@jordanash tnx for replying 🙏
@jordanash 3 күн бұрын
No worries
@azenx4110 4 күн бұрын
is it good with a 12700K?
@jordanash 3 күн бұрын
Always scale the motherboard for the CPU. It will work, but the 12700k is a higher SKU and I expect I mentioned this is more for the 12400/12600K.
@ChristopherCraven 4 күн бұрын
Thanks mate, i couldnt find anyone mentioning the rev 2 model, this gave me piece of mind. It's weird hearing it is a low end board, i got it for $300 AUD, and i'm pretty sure this is the most I have ever spent on a board; usually i'm around the $200 mark, I thought i was buying upper mid range! With gen 5 pci.E and gen 4 m.2's, 4 of them, makes me wonder what the hell i'm apparently missing out on with a higher end board. I know theres gen 5 m.2, but man, doesnt really feel necessary unless it was a business computer that had to transfer hundreds of gigs of data a day.
@jordanash 3 күн бұрын
No worries. Yeah nowadays this is a cheaper board, crazy isn't it. Theres no much you need on a higher one. I run a B650 board in my work PC and don't need more than that, especially using ethernet.
@estebanluere3575 4 күн бұрын
Very good video, objective. I have a question regarding the fans that come pre-installed in this model, can the RGB be modified, regardless of whether the motherboard does not have an RGB/ARGB connection?
@jordanash 3 күн бұрын
You'd have to use an RGB hub or something that connects to the board with a USB 2 header.
@level80888 4 күн бұрын
So far this is the best equipped board for z890 below $650: - 24 phase VRM (not 16, 18 or other cheapo on other brands) - 110A SPS stages (not cheapo 60A 80A or 90A God forbid) - dual BIOS - debug LCD - 10gbe NIC - 2x16pcie with 8x+8x bufurcation - ALL 10gbit USB ports on rear IO - front USB with up to 60W charge (not 20W or 30W) - top audio codec ALC4082 + ESS9219Q - full set of buttons on board/rear IO I bet you will NOT find better board in this price range. Dont tell me about HERO, TAICHI, MASTER or other crap. Read their specs CAREFULY: they all have ONE or the OTHER spec, but NOT ALL at once.
@jordanash 4 күн бұрын
Just to add, from what I've seen the phase of VRM is usually down to the price. Other people like the other boards, plus there's not as expensive. It depends what you want/need. This has so much on it, but has a high price to match.
@krazenn6423 4 күн бұрын
hello, might be a "stupid" question but im newbie when it comes to PC's The Bottom Panel with 2 slots, can i put a nvme with heatsink and the other nvme without and still put the aluminum cover panel?
@jordanash 4 күн бұрын
Not a stupid question at all. It'll need to be a heatsink less drive. You could always use the drive with the heatsink in the top slot without the motherboards cover.
@krazenn6423 4 күн бұрын
@@jordanash true, thank you :) very good video
@jordanash 3 күн бұрын
No worries
@kailron 4 күн бұрын
Disagree with a lot of ppl, I believe this refresh looks very stunning, beautiful, and unique, especially the white version. No more ugly and useless dust filter on top. When it comes to the front, the fine mesh does an okay job imitating a dedicated dust filter, according to my observation from phanteks p500. Keep in mind that dedicated dust filters aren’t a perfect protection anyway, still plenty of dust gets through. This case is way better looking than the previous h5 iteration with a toilet bowl inside
@jordanash 4 күн бұрын
It looks good, but there's some things that just make no sense, like not allowing people to put the PSU face down.
@kailron 3 күн бұрын
@@jordanash it's weird, but doesn't seem like a huge deal tbh. One plus is that there is no need to awkwardly pull out the dust filter from behind and clean it. The bigger negative for me is that it's probably a bit awkward to pick up and move the PC since you can't easily slide fingers under, but I couldn't be wrong, I'd need to try the case in person
@jordanash 3 күн бұрын
PSUs facing down have been a standard for years, not at least giving the *option* is a big oversight. If they did they that, then they could have a side or front access filter, then you wouldn't need to move it anyway.
@Dorielthenpc 4 күн бұрын
thank's for the video
@jordanash 4 күн бұрын
You're welcome, thanks for watching.
@efc2097 5 күн бұрын
should i get this or x670e carbon wifi? i want to run 2 m.2 ssd without losing gpu bandwidth. im gonna run the amd 7950x3d on it and 2 990 pro ssd.
@jordanash 5 күн бұрын
You'll need the X670E I expect for what you want to do with it. X870 only has one chipset anyway
@efc2097 5 күн бұрын
@@jordanash thank you very much,
@jordanash 4 күн бұрын
No worries
@slayzy4008 5 күн бұрын
affordable is crazy 150€ for case aint affordable
@jordanash 5 күн бұрын
Unfortunately I can't help if it's more expensive somewhere else to where I review it. For £99 the non RGB is great value.
@JsinJzone 5 күн бұрын
Been having unstables issues specifically rebooting issues.. used without issues for almost less than 2 months and now ive been having headaches for almost 4 months already.. using 14700kf and 32gb ram 6800 gskill neo and 3080ti with 850watt seasonic focus gx psu.. 1 nvme samsung 990 and samsung 860 ssd sata.. sheesh.. always rebooting when opening games.. kernel event 41 id error :( worked fine for almost 2 months with 1202 bios ver.. updated it to the latest 2703 and still the rebooting issues gotten worse.. tried so many undervolting but no luck.. could it be the psu? Or the cpu degradation/oxidation of 14gen issues of i7 14700kf?? 🥹🥲😩
@jordanash 5 күн бұрын
Have you contacted Asus about it? It might just be something with the board and it's not liking a certain sequence. The might offer a replacement for you. I don't have all those parts (nore the time unfortunately) to try and replicate the issues you're having.
@kartikgupta5416 5 күн бұрын
Can i run it with amd ryzen 5 8600g ? Or it would need a BIOS update ?
@jordanash 5 күн бұрын
Yes and maybe, depends how recently it was made.
@David-Kynaston 5 күн бұрын
TOO LOUD!
@jordanash 5 күн бұрын
I've used -6db as a default for all my videos for years, you're the first to mention being too loud. Just turn the volume down.
@user-nw7ln2lx1m 5 күн бұрын
what about the Gaming PC from Overclockers in comparison with Stormforce ?
@jordanash 5 күн бұрын
Depends on which, they have tens of models.
@LifetipswithJess 6 күн бұрын
Comfort? All day wear?
@jordanash 5 күн бұрын
I have seen feedback on people wearing these all day without any issue. I'm not sure if I'd recommend wearing them all day though, as you might become reliant on them.
@dimitarnanev2238 6 күн бұрын
I got this board, but i have a very weird sound issue. I use my stereo system for sound output, but i have a static noise when no audio is playing (like when i play something on youtube everything is fine, but when i close it the noise appears). The noise is like there is no signal. The interesting part is when i plug headphones in both rear and front ports the noise is gone and everything's fine. Do you have any idea what could cause it? I hope it's not a faulty mobo....
@jordanash 5 күн бұрын
Sounds like a grounding issue, I had a similar thing a few years back with some speakers. Check there's no power cables running parallel along sound cables.
@dimitarnanev2238 5 күн бұрын
@jordanash By "running parralel" do you mean if the sound cable touches the power cable? Could this cause the noise? How did you fix your problem before?
@jordanash 5 күн бұрын
Like parallel lines, running along with one another. I just sent the speakers back causing the problem. I'd email MSI and see what they say about it.
@dimitarnanev2238 5 күн бұрын
@@jordanash I'm thinking now could be the power outlet, it's old and not sure if it's grounded. I'll see what can i do, will send email to MSI also. Thanks for the help!
@jordanash 5 күн бұрын
Ah okay, yeah it might be then. No worries, sorry I couldn't be more help.
@engineerforce8290 6 күн бұрын
Did you just rotate the motherboard or does it need special mounting?
@jordanash 5 күн бұрын
It's rotated in design, but just fits standard components.
@zura24256 6 күн бұрын
Corsair 4000d or h5 airflow 2024?
@jordanash 6 күн бұрын
Depends what you're putting in it.
@sonusingh_108 6 күн бұрын
Which is good option? 1.)MSI b650m (m-atx) gaming plus wifi 2.)Msi b650 (Atx) gaming plus wifi
@jordanash 6 күн бұрын
I've only looked at one of those, I'd just Google each and compare. That's all I could do to help so you just as well do that.
@Dice-xx 6 күн бұрын
Can I put a ddr5 ram (F5-6000J3238F16GX2-FX5) to be specific and be stable or do I need a ram that is in QVL?
@jordanash 6 күн бұрын
G Skill is a very popular RAM company so I expect it'll work fine.
@plane_guy_5 7 күн бұрын
Would a 7700x and 7800xt go well in here?
@jordanash 7 күн бұрын
Yeah, perfect
@uniquecomputers9741 7 күн бұрын
very informative Video
@jordanash 7 күн бұрын
Thank you!
@lovrokumer 7 күн бұрын
Would this work well with ryzen 7 7800X3D?
@jordanash 7 күн бұрын
Yeah, that will be perfect for that.
@MainMaster14 7 күн бұрын
If I had to pick between this case or the H6 Flow from NZXT, I'd prefer the H6, I don't like the wood on the front, plus I'd rather have the USB ports on the front and not on top of the case. But overall, the case looks pretty cool.
@jordanash 7 күн бұрын
Fair play :)
@leviathan5207 3 күн бұрын
Well, the H6 flow comes WITHOUT dust filters in the front, no 140mm mounting option in the front and no support for big boy tower coolers. H6 Flow compatibility, or kack there of, ruins it for me :(
@jordanash 2 күн бұрын
H6 has holes that are a mix of great airflow but also small enough to stop dust. I mentioned in your other comment (I think it was you) that I'm running a CM case with the same small holes and it catches dust really well.
@magmacuberYT 7 күн бұрын
what does the 4 pin in top and reset switch?
@jordanash 7 күн бұрын
To the right of the front panel connectors?
@themarketgardener 7 күн бұрын
The previous Tomahawk looked so much better with the all black look. This puke green color was unnecessary from MSI
@jordanash 7 күн бұрын
Yep, that's the marmite I mentioned
@Sevvi79 8 күн бұрын
Since I decided on a lga 1700 socket for my current setup and since I've been rocking Intel cpu:s for about 18 years I do hope they can bounce back with the next gen and maybe I'll invest in an Intel cpu again. My first custom build PC was an AMD Athlon 64 that was about 20 years ago. Ever since then I've had Intel cpu:s and never been disappointed. Like I said in another post I'll be upgrading from my 12400f to a 14600kf around June next year and that one will serve me several years.
@jordanash 8 күн бұрын
I used Intel for about 12 years before using an all AMD PC I built for the channel. It's been absolutely flawless so I'd certainly weigh up the options when you actually have the funds to upgrade. There might be a bundle that works out cheaper than the 14600k
@Sevvi79 8 күн бұрын
@jordanash Yea, nothing is written in stone. We'll see when the time comes.
@hungz1241_axa 8 күн бұрын
the back upward is a bad idea
@jordanash 8 күн бұрын
As in my comment guidelines, if leaving a negative comment about a product please leave reasoning why to help others.
@hungz1241_axa 7 күн бұрын
@@jordanash IO to top show the lower part of mobo, it seem no quite beauty for almost mobo, if you want theo gpu install to hide it, then the airflow is not good, and it almost cover all the fan led. In the other side, turn IO to bot is a better idea.
@jordanash 7 күн бұрын
Thanks for clarifying
@BreakingTheCipher 8 күн бұрын
Great video, quick question, how would you compare the Phanteks G500A to the Be Quiet! Dark Base 700?
@jordanash 8 күн бұрын
Thanks. They're pretty different in terms of airflow. I didn't thermal test the Be Quiet! but I'd certainly get this if you're using high end parts, the 700 has a solid front panel with limited side intake.
@BreakingTheCipher 8 күн бұрын
@ great thank you. Currently using a FX-8350 with a 1080Ti, but looking at upgrading the AM5. Appreciate the response.
@jordanash 8 күн бұрын
That would be a *monster* upgrade. No worries, anytime.
@jirosaves_theworld 8 күн бұрын
i use 240 variant of this and today discovered your video and realized that big hanging things are pump hahahaha yes it's very silent pump eventhough big confuse of me when seeing pump speed on app said "4000++ RPM"
@jordanash 8 күн бұрын
Yeah detached pumps are becoming more common it seems.
@TheLordKing69 9 күн бұрын
Lane splitting + 6 layer + 2.5 lan is no no for me at this price. They released it too soon imo
@jordanash 8 күн бұрын
Fair enough!
@Sevvi79 9 күн бұрын
Depending on how the next gen is I will buy this next year around black week sale.
@jordanash 8 күн бұрын
I expect there will be offers on 7000 series this year.
@Sevvi79 8 күн бұрын
@jordanash Yea, me too. We'll see how it unfolds. Maybe the Battlemage cards will be awesome (for it's price). Keeping an eye out for that launch and yea the 8k gen from AMD as well. Sure I will watch the keynote speech from NVIDIA at the 7th of January but since I am a budget baller their lineup isn't that interesting to me.
@Sevvi79 8 күн бұрын
@jordanash Just bought a new case, Montech King 95 PRO and will be buying a new motherboard this years sale do won't be able to afford a new GPU this year. Will save up for next years sale though.
@jordanash 8 күн бұрын
Nice case that. Ah fair play, going AM5?
@Sevvi79 8 күн бұрын
@jordanash No, I had to build a pc for my daughter earlier this year so she inherited my old system (i5 9400f) and bought a Gigabyte b760m and i5 12400f for me. So my upgrade path will be a new mobo (probably a Asrock z690 PG Riptide) later this month and beginning of next year a 14600kf for me and my daughter gets the mobo+12400f I am using now. And then in a year ish ill upgrade my RX 6600 to RX 6750 XT and my daughter gets my RX 6600. She is now rocking a GTX 1660. Went with ddr4 and LGA 1700 because of budget and wasn't really up to date on AMD mobos+cpus when I started to build our computers!