“Customizablity”

Where is part 2? I did the mods to mine I want to know how well it’s working after ? Many rounds fired… thanks 😊

I’m the same I never liked the ar platform since Russian made is much more reliable, but I was looking for a rifle that weighs less than my vepr, so I got a 7.62 ar for so. Texas hog elimination.

I have the Zhukov stock on my saiga. With the side mount and a red dot mine lines up perfectly. No need for a cheek riser or a riser for the red dot.

Looks like the burned out area near the Old Hayman fire you shoot at

Buffers can be tricky. Start carbine 3 .oz and spring. Heavy buffers can cause misfeeds from well functioning mags. KAK uppers seem to be gassed well and are from a company doing the 47 platform for some time. BRA bolts run full auto all day. An awesome round to run short with little loss of effectiveness, more so from a reliable platform.

Very informative, thank you. So dyeing green camo a fully solid color isn't possible?

First!

Bro! Your video was EXCELLENT!!! Quite possibly the most clear, concise, honest, thurough and organized presentation i have ever seen on any topic. I had no idea i needed a 7.62x39 upper, but, after watching your video, it not only makes logical sense (ammo cost, 30 caliber option) to build one, but i don't have any apprehension as to where to start or what to do! You have simply removed any fear or hesitation that i would ordinarily have if someone told me i should go and do something i've never done before. You seem to have a gift for teaching and communicating with unusual clarity. Thank you!

look at those dumbells, bro must be RIPPED

Surplus Ammo has a great selection of spare bolts and parts. Great prices.

Building a x39 patrol rifle. Have a BCA side charger, but it's too front heavy with a Sandman S suppressor. Starting with a PWS 16" piston upper Gen2 MK 116. Using an Aero Precision M4E1 receiver with a Rise Armament LE 145 single stage drop in trigger. Armaspec Stealth H2 captured recoil buffer, forward controls REF buffer tube, end cap and castle nut. Ambi safety and mag release because I'm a southpaw. Eotech EXPS 3-0 on top. I'm almost 64 and most of my battle rifles just aren't practical. I prefer the ergonomics of the AR platform, and a 30 cal. round. The linear recoil impulse of the AR is much better than the AK, it's lightweight, and reliable. I'm not a sniper, my intent is for fast, reasonably accurate shots and a platform I can trust my life to. In reality, the ranges I anticipate engagement to be 400 yards and under. Since my wife is paralyzed from a stroke, I'll be hunkering down. Normal velocity 7.62x39 suppresses well enough. The can is more for flash mitigation. I'm putting a B5 Sopmod stock on it. I like the cheekweld it has. Just putting this out there. Still putting it together. Just got out of the hospital after a week in the ICU, so I can't do much now. I just can't wait to put it through the paces. Love my guns. Thanks for the excellent video. Have a great day!

Great video and great instruction. I put foam in the bottom of all mine, used the back buckle but left the toggles on. I have one of these for my 10/22, and 2 for AR's.

Awesome job bro.

After around a year my AR47 runs well. Replaced my Firing Pin with an "Enhanced Bear Creek" in SS. So I have an extra. I only used Brass so not an issue. Will be purchasing Extra parts and things. My x39 is a standard rear and my 5.56 is my side charge. So backwards. But I'm going to be purchasing a different upper in x39. Thanks for the info. Great video. Will check my gas system and recheck my weight in my buffer on both builds. Not my first rodeo, but I only run around 3-5 hundred rounds a year as I can't afford it. I live on SS. Again thanks

I buy from right to bear. Been great. Good deals

I'm subscribing. I don't like to subscribe, but I'm going to straight up about this. If you didn't say to make sure the lower was "multicaliber" who knows what could've happened on my end. I checked and it's not. I have no problem ordering the right stuff. Big thanks on that. The more I know; the more I realize idk shit. That info. is/was detrimental and greatly appreciated, at least by me.

I’m going to spend the extra cash and buy the shoot n see’s out of pure laziness. But this video did answer my question of what it takes to make targets.

I have the psa stage 2 trigger could i use that instead pf the wolf one?

I have the wtb bcg and its been doing pretty good so far

Is the gas block adjustable?

Great work and video. Excellent Elite Spanker has a weird name but makes some top tier stuff for the price.

Excellent work

fantastic video

I have to ask before I can watch the whole video, how did CMMG address the breaking of extractors when firing 7.62 from a 5.56 bolt? Ill be walking the dog a listening. Thank you.

You should check out the Wolfpack Armory WP-47. At my local gun store it was $800 brand new, but just from a cursory look over it gave off a cheap feeling. Idk tho could be a more budget friendly competitor

Sharps bcgg are golden

With the molle installation. You can make a 3rd strap (a dummy one) and put it between the two you are going to sew in Then you can have few pins or the lock in pins to secure the two straps from movement (even like single stitch from either side, if you dont have those, works)

I just received a new MK47 Resolute that came with a bolt stop/release installed. This is not the Dissent! It’s not a last round bolt hold open due to the AK magazine but it’s still a good feature for those that were complaining that the platform didn’t come with one.

I’m about to go play softball, and then afterwards untangle a tape measure. Greatest outro ever!

Heck yeah!

At this rate with the money you’ve now put into this project, might as well just buy a condor or other cheap chest rig with all the pockets you need already built in

Hello brother a little help for you I was watching country boy prepper and he use a 3/4 buckle to adjust the back strap on his rig watches video hope his help ,GOD BLESS AMERICA FEAR NO ONE BUT GOD OR GODS

You add too much due

I know I am a little late to the comment section here, but this video is outstanding. I wished it was around years ago when I was trying to figure out how to build a reliable “AR47.” I will tell you after building many of these rifles that my best experience with BCG’s has been with the Fail Zero nickel boron. They are pricey, but have proven to be the most reliable BCG I have ever used in this platform. I would consider them second to none in performance and reliability not to mention they are worth their weight in gold when it comes to the reduction in frustration that comes with extractors and firing pin failures. Thank you for the very informative video, it is very obvious that you have an exceptional level of experience with this platform as you massed your information exactly where the problems lie with the “AR47.”

Awesome stuff. Thanks brother.

What kind of upper billet is needed

What kind of buffer spring do you recommend? The ks-47 has an incredibly heavy springs and it has to be charged by hand every time, so I am hoping there is a way to mitigate this without sacrificing reliable cycling.

You can tune a rifle but you can’t tuna fish

Nice helpful video! good job!

Im gotta do it.

Thorough. I've seen so many questions posted over the years and this answers pretty much everything. Mine are 1.Radical 16" carbine gas with A2 stock/rifle buffer, tubbs 308 flatwire spring, MBT2, lpvo 2.BCA 10.5 carbine gas with H2, damage ind cs carbine spring, Spikes battle trigger, cheap adjustable gas block, mini PA rds. They're basically both spare parts bin hobby guns but they have the components you covered and work. Definitely 20, 28 duramags.

Thanks for this video

Is there an alternative to the Wolff Extra Power Hammer Spring? I have a 5.45 build and it was the final piece of the reliability puzzle for me but it made the trigger pull feel like it’s about 10 pounds.

Very good video. This will definitely help me with my next build.

I'm a year late, but what a video. Great content man.

New sub! Glad youtube was using my phone to listen to me talk to my friends about my next build! 😅 great content, Thanks

Thanks for all information shared based on your experience

Thanks for this. Answered almost all my questions.

For the admin pouch, I think you can go even cheaper by copying the admin pouch from a p83. Although It wouldn't be practical to add a dangler, expect if it is first sewn, then add the p83 style admin pouch on top