@wattsgifts do you happend to have software for tX800 single head ? i have dongle i just need the software fo rthe single head machine
@TonyGhost-p8w24 күн бұрын
@Ezanity Hello, like many peopIe I have the security USB but my wellprint software is corrupted (install error) and I can't download it ( nowhere to be found) to control my tx800*3 flatbed printer, would you send me the file ?
@Ezanity17 күн бұрын
i have tried to put this too the cloud before and the wellprint shows as a virus(it isnt but then defender will delete the file.)this could be your issue.i can try and compress it with winrar and then maybe try to add to a cloud or if you go across to our facebook page (the group name is in the description) then i could maybe grab a whatsapp number to send it on there.
@TonyGhost-p8w17 күн бұрын
Nice ! I sent you my WhatsApp number via FB. Thanks again
@AdrajKSA28 күн бұрын
Thank you my friend, you have given me a lot of important information... Thank you from
@iCopertina.Accessories29 күн бұрын
Which one is better. Tx800 or XP600
@tarekmaaloufАй бұрын
how are you exporting this when you are saving it?
@lockmanziouecheАй бұрын
Please how to make automatic cleaning for example clean every 6 hour
@shihabjomader58172 ай бұрын
whatsapp
@MM-oh3zs2 ай бұрын
What about that damper seal? Is it a seal that you can replace? What parts have to be replaced? Do I need to bleed the printhead back?
@printexperts3132 ай бұрын
Hello everyone, I need software for same machine. Is there any solution without Dongle USB? Plz guide me.
@RondonRavi2 ай бұрын
How is this machine holding up now? Would you still recommend a Chinese UV Printer?
@FRSBurning3 ай бұрын
Thank you for the video. My first printhead for a UV Printer is broken. Now i dont know which new one i should buy. There are so many arround with big price differences. Have some of you tips or experience. Are there really a difference between the Heads? Thank you for some help.
@justinmann24043 ай бұрын
Any advice on getting the ribbon cables back into the head would be appreciated. I don't seem to be able to do that without damaging them!
@justinmann24043 ай бұрын
Great video, just imported our second machine and had issues getting it up and running, learned loads about the maintenance so trying another Chinese supplier now. I notice you removed the small black clip from the damper. Does this always need removing? I never did this and wonder if that caused an issue.
@AMDTF-mb7dx4 ай бұрын
My print out is grainy even i set the resolution higher and set to slow. where shall i adjust?
@friendsprintart57934 ай бұрын
How can i download maintop software... i have the usb key
@phil77914 ай бұрын
Great to hear some insights form someone here in the UK. They dont look so bad as long as maintenance is kept on top of. Im just about to order a Refine Colour model. Where do you purchase your ink from? Im just trying to work out running costs.
@SHEIKHIRFAN-pl1ic4 ай бұрын
not working 😔
@dafinlacatos81444 ай бұрын
Hello! nice videos and well explained, I also have a request if you can help me, I have a flatbet uv printer, the main board is an epson stylus pro 4880, at the moment I use the CMYK+W+V configuration, I use acrorip 10.3 for printing, which is what I want I can print with a single pass and with varnish, so I have to print 2 times, cmykw and then v, would it be an option to use for maintop printing?
@MarcoTheHEXican5 ай бұрын
Fantastic video!
@mynfcbusinesscard33855 ай бұрын
Great Channel! Can i ask you what i should do witth mine tx800 ? I have only yellow ink not coming out, i checked the dumper and red i flowing, whati should do beore change it ? I already tried to clean the printer head pumping cleaner from the top of the head and also there red and cleaner was flowing, last question is it true that for thi sprinter head a normal 95% acohol ?
@Ezanity5 ай бұрын
hey thanks for the comment. come across to our facebook page and you will get may different options to try. you can then post photos to assist helping you.if it was me id be checking the yellow pipe from the start of the ink pot then work back towards the head.the connector that goes into the damper can sometimes get blocked,also if you have the plastic caps on the bottom of the dampers try to remove thhem as i wouldnt get a good seal when they was on.
@MrValentino3355 ай бұрын
Hi... i tried this process. All the inks are working besides the black. When i try to syringe the cleaning liquid the black ink through the head, It builds up pressure and shoots out.
@technoportsolutions6 ай бұрын
Hi i have an epson 4720 dual printhead dtf printer my issue is white alignment
@Ezanity5 ай бұрын
would need more information than that.what software do you use.
@technoportsolutions5 ай бұрын
Same as yours
@mariusmjm47486 ай бұрын
Where to download the full USB driver package like the one in the video
@freebird19637 ай бұрын
HOw well are these built ? Do they run good w/o a bunch of issues ? Looking into one now and just nervous about buying a Chinese one. Thanks
@Ezanity7 ай бұрын
dont get the same as me as i cant advise using this company.if your new to uv printing i suggest finding a company that supports there customers after purchase.ive heard many good things about jucolor but your welcome to come over too our facebook page as there are many people that use various chinese printers that will give you there experiences with different companies
@retrogameboyz7 ай бұрын
Hello any reason why when I use my spot channels - the color does not show over my image? The first time I did it - it did work. When I export my tiff and create my PRN I am not getting any white in the stats.
@Ezanity7 ай бұрын
did you use capital letters on your spot channel? W1 not w1.if so come over to our facebook page and send me a short video of how you do it and ill help you
@yeelala15297 ай бұрын
My Wellprintexp program has white ink in channel 5, channel 6 then it cloge, my printer has 1 head.so, I would like to move white ink to channel 1 and 2 how can i setting them.
@Ezanity7 ай бұрын
the quickest way for a reply on this would be to join our facebook page. in wellprint on the maintainance / basic settings tab the colour offset is on there where you can change what channel does.i would say though that if you only have 1 head then surely you would be best to unclog/replace the head as im sure you will need all the channels for colours too.
@PixelstudiosCoUkWarwick7 ай бұрын
Hello there! I wonder if I could reach out to you direct for some help....I have a Rainbow UV printer but seriously struggling with getting the artwork to come in correct and getting the orientation correct and setting the origin on the bed...support at Rainbow isnt really helping...please let me know if you could help me...many thanks!
@Ezanity7 ай бұрын
hey.are you part of our facebook page.the page is called "uv printers epson wellprint users group" there you will find me (dominic watts) along with many others that will happily help you way quicker.
@mohammadalhamza18087 ай бұрын
First of all thank you so much How I can contact with you on whatsapp or other site ?
@Ezanity7 ай бұрын
Check description.the facebook page name is there or i think the link is on one of my other videos.join us over there and im always active on there.
@gfdggdfgdgf7 ай бұрын
Setting up a rainbow nano 7 tomorrow, it arrived undamaged so inattention should not be a problem
@Ezanity7 ай бұрын
guess you will get to see what there instructions are like tomorrow then lol.if you get stuck gimmie a blast on here.happy to help
@santijulieandisahouseoffun27247 ай бұрын
Have a question how come when i do a spot chanel just turns white no red or blue always white sorry im new
@Ezanity7 ай бұрын
have you changed the colour?look @ 2:19 of the video you will see in the "new spot channel" window it has color and mine is red.if yours is white click on it and it will allow you to change the colour
@simonhourani52288 ай бұрын
Love the amount of information in your video😍 but my only problem left is that i can't seem to figure out how to save new images in the recommend format to print it any help would be great Thanks!
@Ezanity7 ай бұрын
so you just need to create your image in something like photoshop and when finished save it as a TIF file.then in maintop load up that TIF file and once you have confirmed size etc you then save that as a PRN file. then in wellprint open the PRN file and your ready to print to your media.it may be slightly different if your using different software/rip for your printer.
@simonhourani52287 ай бұрын
@@Ezanity thank you for the help!
@Top1UV_Printer8 ай бұрын
No one needs large format of this ?
@Ezanity7 ай бұрын
no one needs a large format? then why are you selling large format printers lol
@Top1UV_Printer7 ай бұрын
🥺I don't know, after quotation,they always asking me if there are small format printer@@Ezanity
@azfarayub20318 ай бұрын
I need tx800 head
@Ezanity7 ай бұрын
sorry for the delay. so i would look at reviews before purchasing heads cause some can claim to be good but then not. i do find you can purchase one from amazon and then get your money back if they dont work or just looks at good reviews of companies on aliexpress to find one that will take returns
@azfarayub20318 ай бұрын
I use tx800 magenta color is not working can solve it
@Ezanity7 ай бұрын
sorry for the delay.hope you have sorted it but if not check out my other videos for cleaning.
@paulhill16628 ай бұрын
I really am intrigued by the books on your wall, how did you do it? Please?
@Ezanity8 ай бұрын
sorry for the delay,its just wallpaper
@paulhill16628 ай бұрын
I plan on testing this once i have fixed my printer. My thinking was it would be great to use soft ink on everything but will have to see what it is like on wood etc
@Ezanity7 ай бұрын
hey sorry for the delay.did you manage to fix and test your printer.soft inks wear quicker on hard surfaces.ive just put hard in 1 printer and soft in the other to do tests like this
@julyantolay68599 ай бұрын
Helo Thank you for your video I m using tx800 I want to ask Why this print head life is so short? My print head only last 3 months
@Ezanity7 ай бұрын
sorry for the delay.so it depends on various factors.heres an example. my friend had his printer in a uninsulated shed here in the uk without using the heater on the head.he would use his printer most days but would go through heads every 2-3 months. i have my printer in a warm house where it is normally 20+ deg c, i leave the heater on the printhead and i use it a few times a week and my printhead went on for over 1 year before it started to play up. the thing i would say to him is that the cold likely didnt help him and especially not having the heater on but the amount of products he could make on it should have helped with the price of head replacements so it was likely to need replacing more than mine but if he worked on getting it in an area that had steady warm weather then he could have likely improved the life of it.
@courtneylyons79759 ай бұрын
I just received my uv printer and just learning. When you said you are printing on acrylic and you were going to print backward...how do you do that?
@Ezanity9 ай бұрын
so if you mean to print on the inside of clear acrylic you have and lets say you have any text or part of image that would look silly flipped, then when you edit your photo make sure you flip it when you save the tif file for maintop.then no settings have to change in maintop but in wellprint go to "parameters" and in the white-ink settings section there is a check box called "white-ink back" check that option and it will print your colour first and then your white ontop. your acrylic will look all white but when you look at the bottom you will see the image through the clear acrylic.if this isnt what you mean message me back as i uploaded that video ages ago.
@mikebrown35410 ай бұрын
Would you recommend Rainbow UV printer? I am think of getting one but I am worried about the aftersales support.
@Ezanity10 ай бұрын
i have no association with rainbow so i can not recommend them. how much uv printer experience do you have?if very little then you most defiantly require some good after sales support. although i havent purchased a printer from jucolor ,they are very active helping people in our facebook page who are not all there customers and i know many people with there printers and have not found someone who is unhappy with them.
@booga118610 ай бұрын
Why does the white print head keep clogging it is fustrsting
@Ezanity10 ай бұрын
the white has small particals in the white colour that need to be continually stirred ,first i would check that your paddle inside your white container is working. you can also buy a milk frother to help stir the paint more. also check that you have good new ink and not a poor quality white or out of date.remember that white paint has a shelf life of 6 months
@EMEKAEZE-sv2cs10 ай бұрын
Hello, the teaching was awesome but i have one question, my printer is showing maintop on the printed job and ki don't know how to remove it. Please can you make a video on how to do that?
@Ezanity7 ай бұрын
ive very sorry for the delay in replying but ive been struggling with health issues. did you sort your issue.it sounds like you had a watermark which is normally down to the usb/passwords.
@retrogameboyz10 ай бұрын
Thank you for this. Watching the “provided“ videos without voiceover and in low quality is not ideal your videos clearly explain exactly what I was looking for much appreciated. I do have a question. I will subscribe and search your channel but do you have any videos that talk about image alignment procedures ? I recently purchased a Jucolor and awaiting arrival and trying to brush up.
@Ezanity7 ай бұрын
hey im sorry for the delay but with christmas and some health issues this channel got set to 1 side.did you figure out what you was asking?also very glad you went for jucolor as they are very active in our facebook page helping people.how have you been getting on with your printer?
@GuyInaQ7 ай бұрын
@@Ezanity hello sir thank you for your message. Yes I am having much success with it and I’m very happy that I went with them by the way your video was very helpful and there aren’t many videos out there really explaining how to work with this printer and the engineers though they are very good they leave a lot of information out and the language barrier sometimes causes problems. I’m planning on making some videos on my channel as well because I’m learning a lot and I am super excited I hope your health is better and if you ever have any questions or if there’s anything I can do to help in this area please let me know I still have a couple of training sessions with the engineers tonight. When you say Facebook page do you mean your own? Or the Jucolor page as I am a part of that and have been receiving good support as well. Even though my prints are coming out fantastic when I do a head status I can see gaps in the different colors and the people on the Facebook page are telling me to keep cleaning until there aren’t any more gaps I’m not sure if that’s correct because no matter how many times I clean I get gaps and random spots in the different colors but yet my prints are coming out awesome.
@NguyenLong-gv1zx10 ай бұрын
I can not find the visual studio setup file, can you please give me the link?
@Ezanity7 ай бұрын
so sorry for the delay.did you sort this out?.what printer do you have?
@zahoorshah113610 ай бұрын
Good nice helping 💯
@Ezanity7 ай бұрын
thank you so much.if theres anything you want help on just ask and i can try my best to help and make a video
@user-bu8ks4qv2w10 ай бұрын
Please Upload the video Sport Channel Effect in the Vehicle Headlight Glowing Night effect
@Ezanity10 ай бұрын
im sorry im not quite sure i understand what you mean
@troythatcoolkid10 ай бұрын
I have requested admission to your FB group, just waiting to be let in! Thank you!
@Ezanity7 ай бұрын
did you get in ok?
@AdrajKSA28 күн бұрын
I would like to join your Facebook group
@Ezanity26 күн бұрын
@@AdrajKSA by all means just request and ill be happy to allow you
@NyZFighters11 ай бұрын
where can i get this printer?
@Ezanity7 ай бұрын
sorry for the delay. i hope you didnt get the same machine as mine. i do hear jucolor are very good with there customers though
@edmondopowell11 ай бұрын
i bought a printer and they said i have to use this to print i do everything else in adobe or coral but only use this as a rip software to print in the end that`s really it.
@Ezanity7 ай бұрын
hey so sorry for the delay but with christmas and health issues that took all my time up. so i use photoshop to create my image, i then passthrough maintop only to get my prn file for the rip software and then wellprint to send to my printer.what printer did you get and how you getting on with it?
@edmondopowell7 ай бұрын
so what happened was anything i downloaded maintop on above windows 7 it wouldnt stay and kept deleting. so had to go back reinstall windows 7 to a comp for that as its the software that came with the machine to use. @@Ezanity its refretonic machine. i must suck the ink out to the printhead now to test it. then see will it print off maintop
@muskokamike12711 ай бұрын
40:49, love your style of teaching, "just put a little bit of maskin tape" where the....so casual and no techinical gobbledegook. I teach the same way. I am a skilled carpenter with 40 yrs experience and I "dumb it down" whenever I'm explaining things to young guys who don't know anything so they can understand it. I also run a cnc machine and I HATE when you talk to machinists etc and they get all wrapped up in their lingo that you don't know what the hell they're saying. I've been involved in quite a bit of different trades and disciplines over the years and they ALL have their "lingo" that they live by. I'm currently setting up a large UV printer from Rainbow in China and their instructions are pathetic. "Plug in the usb cabo" WHERE? no pics, no instructions, nothing. It took me a freaking hour to find it and the only reason I found it was because of my experience building my cnc. I opened the access panel "ok, there's the stepper motor drivers, there's the interface board, there's the main board ok, the USB port has to be somewhere on this board. THERE it is, behind a freaking heat shield and wedged against a wiring raceway. I had to install it using 14" long surgical forceps because I couldn't get my hand in there. Test head. SEND PIC TO ENGINEER! what engineer? a random one out of the phone book? A local one I found through a google search? How about setting up an email address and listing that in the instructions? I used to write assembly manuals and theirs is the WORST one I have ever encountered.
@Ezanity7 ай бұрын
thank you so much.what printer do you have and are you part of our facebook page?
@muskokamike1277 ай бұрын
@@Ezanity I have a rainbow printers 1016UV and at this point, it is nothing more than a space waster. It doesn't work for more than 3 days before it clogs the heads. Shortest it worked was 3 hrs. The manufacturer isn't any help, they keep spitballing nonsense. DO NOT BUY ANYTHING FROM RAINBOW PRINTERS OUT OF CHINA!!! Wasted $20,000 CDN and 100's of man hours.
@meiding695111 ай бұрын
Where can buy tx800 printhead
@Ezanity10 ай бұрын
sorry for the delay.did you manage to source a new head.i get mine mostly from aliexpress or you can use amazon as they have a good returns policy