Hi, my PS2 Slim cd drive spins both ways, is there a fix for this problem? I'm looking for a new motor anyways, but I can't find which one it is, I don't see a type number like which on the laser is written as; PVR-802W. It could be the flexcable of the motor, but it's soldered on the board and that's why I have to look for a whole new motor
@lf3552Күн бұрын
Hello even when I cluck the trigger manually it doesn't spin
@EasyConsoleFixesКүн бұрын
Are you getting any movement from the laser, after the console detects the lid has closed it will try read the disc. If it doesn't detect a disc it wont spin.
@lf3552Күн бұрын
@@EasyConsoleFixes no, no movement :(
@srash_9993 күн бұрын
My phone bend and half screen pop up. I have no idea wht to do 😂
@EasyConsoleFixes3 күн бұрын
Is your phone screen still working, just a bit popped out. It should be an easy fix.
@nerdsoftheasylum5 күн бұрын
Can I use t7000 glue?
@EasyConsoleFixes5 күн бұрын
Yeah T7000 glue would be fine.
@yoshipilot9 күн бұрын
This worked! Thanks!
@chriss436511 күн бұрын
Recapped mine and screen goes off and on and caps on power board are making noise.
@EasyConsoleFixes5 күн бұрын
Hi, sorry for the late reply. Had you any luck fixing this. The caps definitely shouldn't be making noise. Swapping the power board could be the easiest fix.
@chriss43655 күн бұрын
@EasyConsoleFixes after a few minutes it stopped and I've used it for about 4 hours with no issues.
@shaneezageorge632212 күн бұрын
Hi can i use super glue
@EasyConsoleFixes8 күн бұрын
Some people have said they have used super glue and it has been fine but it's not really the right glue use as it can be a bit brittle.
@Ishika00716 күн бұрын
got my screen fixed a few hours ago and the top right side is coming off again and I've gotten it fixed twice by now from the store
@EasyConsoleFixes15 күн бұрын
Did you return to the store with your phone. What was there response.
@Ishika00715 күн бұрын
@@EasyConsoleFixesthey said they put the glue on lightly and that my phone overheated
@EasyConsoleFixes14 күн бұрын
@@Ishika007 I really wouldn't expect a screen to lift so soon after being done. What was the original reason you gave the shop the phone.
@Ishika00714 күн бұрын
@@EasyConsoleFixes to get my screen glued but it started coming off again after a few hours but right now it isn't as big as it was before
@EasyConsoleFixes14 күн бұрын
@@Ishika007 I did this repair in the video around 9 months ago and the glue is still holding the screen fine. I really wouldn't be happy with that response from the repair shop.
@MrItachi11416 күн бұрын
Great video, a little tape goes a long way!
@richardstrait372316 күн бұрын
Just found this video thank you so much
@EasyConsoleFixes16 күн бұрын
Thanks, glad the video was able to help.
@unknowgamer742620 күн бұрын
Appreciate Ty for the vid 🙏
@bearded.vulture22 күн бұрын
doing this for my old ass tablet, im not replacing it yet im too broke
@JUSTDHEMZ22 күн бұрын
oh i have the same prob now.
@Mario_kart_pro2011.n23 күн бұрын
Replacing a top screen on a new 2ds xl is easy
@kth_bhumika24 күн бұрын
For what duration the elastic is gonna stick with phone
@EasyConsoleFixes22 күн бұрын
I left the elastic bands on for 15 or 20 minutes just to make sure the glue was dry.
@friedCN28 күн бұрын
I just noticed it before going to sleep and i have school tomorrow morning. Dang it
@hugglepot29 күн бұрын
I have cleaned 3 times and it's spotless.the contacts are clean but I still get the "WT toner box ends soon " message. Does this message require a reset somehow other than a power reset.?
@EasyConsoleFixes29 күн бұрын
Can I just confirm you have the contacts in the closed (touching position) If so here's a link to a video I saw before a printer with your issue which may be worth taking a look at. kzbin.info/www/bejne/eH7KoZaXmbekoqM
@hugglepot29 күн бұрын
Yes, the contacts are in the closed position and clean
@warningyt6553Ай бұрын
Is the screen still holding now?? Im curious how long does that glue last
@EasyConsoleFixesАй бұрын
Hi, it's around 9 months since I glued the screen back on and it's still fine.
@arturomailАй бұрын
I replaced the laser on my slim about a month ago and I just realized that it reads PSOne games and DVD PS2 games just fine, BUT it won't read blue-backed PS2 games. Any ideas?
@EasyConsoleFixesАй бұрын
Normally the Laser's stop reading blue backed discs when they are starting to die. What you describe is normally the first signs the laser is failing.
@arturomailАй бұрын
@@EasyConsoleFixesbut this is a new laser.
@EasyConsoleFixesАй бұрын
@@arturomail I know it's a new laser but most times I change a laser it's because the console is doing what you described. Was the console reading any discs before the laser was changed. You could check the potentiometer on the laser with a multi-meter to make sure it is set to the right resistance.
@PoukodotАй бұрын
For a 15 yr old this video made things so much easier and it works now thanks! Only problem is clamping the console back together the hinge in the back won’t tightly close all the way and the battery port isn’t aligned with the shell
@EasyConsoleFixesАй бұрын
It's hard to know without seeing the console but are you sure you installed the hinges correctly when putting the console back together. They are meant to be orientated a certain way.
@samvlog793Ай бұрын
😮 I was shocked I took my back cover on my Samsung Galaxy A21s and saw my hold screen is lifting out how is it possible did the glue just gave up and melted off
@EasyConsoleFixesАй бұрын
The glue just degrades over time, it is worth checking that the battery hasn't started to bulge as that would make the phone dangerous to charge.
@GiovannaIwishyou14 күн бұрын
Same phone has my mom and this just happened. We cannot turn the phone off at all, it's just black screen but it's still sometimes vibrating like it's reacting somehow. Will it help if we just glue it down?
@EasyConsoleFixes13 күн бұрын
@@GiovannaIwishyou Has the whole screen came off the phone. Do you think the ribbon cable that connects the screen to the phone could have got disconnected or damaged. My screen was still working so I knew all it needed was to be glued back down.
@GiovannaIwishyou12 күн бұрын
@@EasyConsoleFixes Not the whole screen, it still attached at the bottom. But yes I guess the ribbon is maybe even broken. Mom will take it to the technician today so maybe they'll try something. But thank you for your reply! I really appreciate it.
@TheNateaudioАй бұрын
Great video, thank you for this. My PS2 is working great!
@EasyConsoleFixesАй бұрын
Glad the video was some help, it's great that you were able to get the console sorted.
@ytgamer5067Ай бұрын
My bottom eject button doesn’t work so I have to use the controller do I also count on following this video?
@EasyConsoleFixesАй бұрын
If its ejecting fine when using the controller but not when using the eject button it sounds like the mechanism is fine and the button is broken.
@rodneyroimatawhanga525Ай бұрын
My oppo a77 did this the face came away from the base before I could take it back to the shop it had fallen to the floor and split apart the ribbon between both ripped in half. I took it back to the shop but because the ripping had broke the phone was no longer under warranty. I had to get a new phone and asked the phone company if they be able to download the data to a new phone. Their answer was they don’t repair phones I would have to go to a tech firm. Went to the tech firm the girl told me this was the first time the face of a phone has fallen off the base and quoted $80 deposit and then at least 3 weeks to be sent away to try and retrieve the data. Suggest I try a different firm. What I can’t understand is the face is in good condition it’s just the copper ribbon between face plate and base is torn. Can we replace the ribbon.
@EasyConsoleFixesАй бұрын
It really depends on the model phone you have if you can just replace the ribbon. depending on the how the ribbon connects to the screen, you may need to replace the whole screen now that the ribbon is damaged. A lot of phones will also need a lot of disassembly in order to get access to where the ribbon connects to the main body of the phone.
@rodneyroimatawhanga525Ай бұрын
@@EasyConsoleFixes thanks for the reply I think this must be an easy fix the face is basically perfect not even a scratch however the ribbon is broke I will post a photo of my broken ph.
@min_rik9032Ай бұрын
Helped so much and its now fixed so I can now sell it for more, big help
@fridolinkasperl6010Ай бұрын
Funktioniert. Hab bei der playstation ohne scart den Wert 850 eingestellt. Bei der psone brauchte es 950. Danke für die Anleitung 🫡
@sabrinadunson6903Ай бұрын
Can I use this for The back plate of My Phone 📱? The Hot weather Has made it lift Like the screen You are showing But it is the Back Of my Phone Not the screen
@EasyConsoleFixesАй бұрын
Depending on the model of phone yes you can do this to glue the back on. Most modern phones the back is just glued on. Just make sure the back didn't pop off because the battery has started to swell or distort.
@sabrinadunson6903Ай бұрын
@@EasyConsoleFixes Thank you for your reply I Have My Beloved Samsung Galaxy Note 10 ➕️ 5G I am Praying it works 🙏❤ Thank you for your reply And Help
@derniereFAАй бұрын
This damn ps2 destroyed 5 cds
@MrBZ123Ай бұрын
I can't believe it's just cleaning Do not touch the screws I just cleaned the lens and worked all the dials
@EasyConsoleFixesАй бұрын
If a console is not reading disc's cleaning the laser lens should always be the first thing attempted. Adjusting the potentiometers is really a last resort as it means the laser is dying and you are just prolonging its life.
@OvidiuAka-g1tАй бұрын
I tried to clean the rubber band from inside and works but for 2 or 3 weeks
@EasyConsoleFixesАй бұрын
The real issue is the rubber brand losing it's strength and shape. Cleaning it will only ever be a temporary fix. Replacing it is the only long term solution.
@McE_Official_GamingАй бұрын
My screen is slightly lifting up on the rigth side
@bladeless-qz8zeАй бұрын
Same
@bladeless-qz8zeАй бұрын
But now it had gotten wprse
@Ishika00716 күн бұрын
got it fixed a few hours ago but it's coming off again and i cried 2 hours about it👽
@JustSomeGuyLV11 күн бұрын
Same, but only top left corner. My phone had dead screen soon after I bought it and shop repaired it. I'm guessing after they glued screen back together, that adhesive is coming undone. Plus I've dropped my phone few times on carpet from hips height, but modern phones should be resistant to this type of damage.
@jjs60533 күн бұрын
@@JustSomeGuyLVhow mich did they charge you ? Im getting mine fixed tmrrw
@Marqn-lt2lrАй бұрын
I have a problem.... having disc installed,but don't show it ,also dont allow me to remove it,is it mechanical or optical problem...? I be thankfull if someone help txs...
@EasyConsoleFixesАй бұрын
If the console is not allowing the disc to eject it sounds like a mechanical problem. Does the console make noise when you try and eject the disc.
@user-ot1jr2ej9nАй бұрын
@@EasyConsoleFixes a have the same problem and my ps making noise wen a putt a disc the whole time it is because a have a Pokemon card stuck in the ps4 so what do I do?
@EasyConsoleFixesАй бұрын
@@user-ot1jr2ej9n Unfortunately there is nothing really you can do except remove the Pokemon card. If you can see it through the slot for putting the disc in you might be able to get it out with a tweezers, otherwise you will have to take the console apart to get it out.
@danielclark9624Ай бұрын
kudos for releasing this video. we all make mistakes, it's important for people to remember that. thank you.
@EasyConsoleFixesАй бұрын
Thanks for comment. This is a tricky repair and I thought it best to show that if you make a mistake it's still fixable.
@ZukileSturrohTomАй бұрын
I want to fix my. PlayStation
@user-oq1fu4zq4tАй бұрын
Thank you so much
@purplementhol3388Ай бұрын
Can i just use a double tape?????
@EasyConsoleFixesАй бұрын
Yes double sided tape will work. The only thing with tape is it might still let dust and moisture into the phone.
@rayzojams2 ай бұрын
what's the material used for solder on ps2 controllers? do any work as long as it's a strong enough material? if yes, then does tin work? unless it doesn't have the same properties as lead or other materials. i know it's pretty obvious but replacing ps2 joysticks is going to be my first soldering work so i have no idea about how this stuff works haha
@EasyConsoleFixes2 ай бұрын
All modern electronics use lead free solder but if I were you, especially since it's your first project I would use leaded solder. There's no difference in terms of strength but the leaded solder it easier to work with.
@rayzojams2 ай бұрын
@@EasyConsoleFixes i see, my soldering pen came with tin so I'll try using that, also what would you recommend for flux (if it's necessary, from what i saw it's for cleaning or preparing the board for the solder i think?) and desoldering? i saw it was easier with a desoldering pump than solder braids but it might not always work
@EasyConsoleFixes2 ай бұрын
@@rayzojams Any Rosin flux will do really. you definitely want to use flux, you'll find the solder flows much better using it. Using a pump and then tidying up any left with braid is probably the way to go.
@rayzojams2 ай бұрын
@@EasyConsoleFixes okay thanks for the help!
@agentg112 ай бұрын
I have the same problem but i don't know the cause I remember dropping it And i think its also because of the battery but i can't see a bump or bloating in the back
@EasyConsoleFixes2 ай бұрын
There didn't seem to be any issue with my battery, the glue just seemed to have let go. My phone is in a rubber case and gets dropped a lot so that could be the cause.
@portmoodyhandyman2 ай бұрын
I went clockwise 1/8 turn, didnt work. Went another 1/8 and it worked! Just got my 24 year old ps1 from my parents storage and brought it back to life! Thanks!
@EasyConsoleFixes2 ай бұрын
That's great you were able to get it working, it's nice to be able to keep these old consoles running.
@giornopotanna32702 ай бұрын
3:32 I don't know how but I managed to snap the ZR button out of the motherboard lol...
@EasyConsoleFixes2 ай бұрын
It's not something I have done on one of these but have done it to a few DS Lites. It's fixable if the boards not damaged but what a pain in the ass.
@giornopotanna32702 ай бұрын
@@EasyConsoleFixes yeah I re-soldered it in place, the DS is one of the worst consoles to repair honestly
@bhagyammakm42302 ай бұрын
Thank you mach
@SpookytubeBerry2 ай бұрын
umm so i think i kinda broke the ribbon cable and my phones turned off and its over heating TwT
@FixCarYourself2 ай бұрын
Thanks, it worked for me for a few days after cleaning the waste (dust powder stuff), then got bad again. So I did the same thing again but used some towels and rubbing alcohol on the rollers. The roller was quite dirty as well. That seemed to fix the problem for me in addition to initially dumping the waste. Excellent detailed video!
@EasyConsoleFixes2 ай бұрын
Glad you were able to get it sorted. There's really no reason why Brother couldn't have made this easier for the user to do.
@goof9562 ай бұрын
Hey! I'm looking to get my 2ds repaired as it has this same problem! If i order a screen, would you be able to try and repair it for me? I will pay of course. I'm in Ireland too so thats handy enough. Just cant find anywhere that will fix them anymore... and the fix looks quite daunting...
@EasyConsoleFixes2 ай бұрын
Hi, no sorry I wouldn't be to do the repair for you. I think you will struggle to find someone to do it as you can see from the video it's quite a long repair and the potential to damage the console screen surround is quite high as it's glued together. If I was you I would give it a go myself, although it looks daunting, as long as you go slow and follow the steps you should be ok. I would just buy a replacement screen lens ( I have linked an Amazon one in the description) along with the screen. The repair is much easier if you are not trying to save the old lens.
@indy5280Ай бұрын
From my experience it’s more worth it to import a Japanese console and take the top half of that or just put the board into that one
@EasyConsoleFixesАй бұрын
@@indy5280 Once you can get the donor console cheap enough, that does seem like the easier way to go.
@Matt101Vgettio2 ай бұрын
Should I replace the battery as well since the swelling is what did it or just glue it.
@EasyConsoleFixes2 ай бұрын
Yes you should, if the battery has swelled it's really not safe to charge the phone. If the battery goes it can easily start a fire.
@green97probe2 ай бұрын
Great video. For the T5 screw on the laser, I tighten them until they bottom out, then back off a quarter turn. I then spin the worm shaft with my finger to be sure it's not binding.
@EasyConsoleFixes2 ай бұрын
Yeah that's good advice to get them about right.
@hamzaKb22 ай бұрын
Hey i have a problem with my ps4 when i put the disk it goes out by itself
@EasyConsoleFixes2 ай бұрын
Is the disc coming straight back out when you put it in or is the disc being ejected randomly.
@CasualDoomer8972 ай бұрын
Keep the camera on the fucking console. Christ.
@EasyConsoleFixes2 ай бұрын
Put the paper clip in the hole, it will turn a gear and open the disc tray. There's not really a lot you need to see.
@poeaint2 ай бұрын
my entire screen fell. idk if I'll be able to buy that same glue here in Philippines 😅
@agentg112 ай бұрын
I think meron sa shopee
@user-pz1uz1tw1l2 ай бұрын
Does nail glue work it strong :(
@EasyConsoleFixes2 ай бұрын
Nail glue would probably work but it's not something I have ever used.