2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@Repter75 Ай бұрын
Do you think it'd be possible to fit a couple of 6S lips in that top pouch with the v2 goggles and TX16S in there? How about a small 2" and a couple of 2S batteries? I'm thinking this could make for a pretty compact travel bag for quick rip and dip sessions.
@MiniMicroFPV Ай бұрын
@@Repter75 The 6s lipos would most likely not fit with the goggles and TX-16S but you might be able to fit a small 2” if it’s low profile.
@MorningView Ай бұрын
How well did this quad hold up?
@MiniMicroFPV Ай бұрын
I still fly it on occasion with no issues. I have not had any bad crashes or other incidents so I can't really speak to its durability in that regard but the materials and components are holding up fine.
@MorningView Ай бұрын
@@MiniMicroFPV thanks for the info! been wanting a 03 whoop and i think this one will be it.
@MorningView Ай бұрын
How well did this hold up? It's half priced now and I'm thinking about getting one.
@Vault114Net 3 ай бұрын
Sometime ago I bought a BetaFPV Cetus X for learning FPV. That little beast is so much fun, but the recorded analog image is a mess when watching on the big screen. I got a used Insta Go for just 40 bucks today, looking forward to mount it on the Cetus :) Thanx for the video (and yes I know it's 4 years old).
@MiniMicroFPV 3 ай бұрын
@@Vault114Net Hehe, glad to hear you got such a great deal on a used Go! They’re a lot of fun with FPV and can deliver good results.
@sumthinstupid 5 ай бұрын
Hey I'm getting into fpv and I am building my own drone, looking at this one, does this come with anything else?
@karthikvs9635 5 ай бұрын
Can this be powered on without thr batteies by just hooking it up to pc with usb c ?
@MiniMicroFPV 5 ай бұрын
@@karthikvs9635 From what I can tell, it cannot.
@ilyasguner2267 8 ай бұрын
Hey guys im totally new to all of these so can someone explain what this device is please. Aren't there better screens thay lets u see what pilot sees? What sperates this device, what is dvr? Thx 🙏🏻
@sonny52 8 ай бұрын
Which is better for cinematic nd16 or nd 32?
@MiniMicroFPV 8 ай бұрын
If the sun is blazing maybe 32 but 16 is probably more useful all around for controlling shutter speed.
@dailydronejourney 8 ай бұрын
how the result after your using this battery until now ? there is no problem ?
@MiniMicroFPV 8 ай бұрын
Still works okay but the cells tend to be a little unbalanced after use but that might just be mine.
@Spideystrat 9 ай бұрын
Getting that front camera section to push back into the holes is VERY difficult it appears..
@ravib.p5635 9 ай бұрын
At what current does it charge the lipos? 1c?
@ivoangelov7 Жыл бұрын
hey, nice video :) any chance I can get my hands on the plugs .stl? cheers 🍻
@BoneChillin Жыл бұрын
Can it be connected to mobile fpv freerider?
@VetteWay2Fast Жыл бұрын
What kind of connector does this have? Thought it was a molex but when it arrived, it’s different
@rwehuman Жыл бұрын
I am an Elf pilot too!
@MiniMicroFPV Жыл бұрын
Hooray! I'm getting ready to move to Japan and the Elf is being shipped because I definitely want to keep flying mine~
@rwehuman Жыл бұрын
@@MiniMicroFPV should be able to find some good sloping spots if you csn get to the coast. have fun.
@justvic3625 Жыл бұрын
What is the current for 2s battery, 300mA? Or how it setup?
@MiniMicroFPV Жыл бұрын
It seems to be around that level. There is no way to adjust it up or down.
@dronefilmsgermany Жыл бұрын
Can you share your pid values. Really appreciate your work
@dronefilmsgermany Жыл бұрын
Superb video. Can you share your pid settings
@kapilyadav8226 Жыл бұрын
plz guide dip switch settings, i am confused as settings mentioned behind the charger are different, but in the video is different. Plz guide, what is the correct way to charge for 4.2 and 4.35 volt?.
@DroneOn Жыл бұрын
Great video
@moviefalk177 Жыл бұрын
Hello cool video! Can I use the RunCam Nano2 to work with a 1s battery with 3.7V? And does the RunCam Nano2 come with a built-in antenna? Or do I have to buy the antenna separately? Can you please help me with this PS: Would the RunCam Nano2 work with Eachine 800DM glasses?
@guesswho9418 Жыл бұрын
Hey man wahats up. What are your rates?
@MiniMicroFPV Жыл бұрын
Looks like I've got 800 on the Max Rate using the Actual rate type.
@ampedandvolted Жыл бұрын
Looks like a lot of prop wash on the dives at 0 throttle, it shakes all over the place, the flight controller not adjusting fast enough to gyro data. Still quite impressive for a quad this size.
@MiniMicroFPV Жыл бұрын
Some of that could just be down to my flying! In general I found the prop-wash handling pretty good with the caveat that throttle needs to be kept up a bit due to its weight and size.
@mokshpatel6986 Жыл бұрын
I don't know why my 1/3 channel won't charge 2nd cell and red/blue light blinking one by one
@MiniMicroFPV Жыл бұрын
Hmm. I've not seen this behavior before. Can you provide a little more detail? What sort of power supply are you using?
@konaboyz1690 Жыл бұрын
Abarth 500?
@MiniMicroFPV Жыл бұрын
Hehe, it's a 500e.
@carlhall2563 Жыл бұрын
Do you know of any whoops or drones that have ELRS V3.0? Most are V2.0 and need to be updated. Some are easier than others to update their version of ELRS. This is why I am looking for a V3.0. Thanks
@MiniMicroFPV Жыл бұрын
I hear ya! In general I don’t like to flash new firmware or binding phrases and always use the triple-power-cycle method of binding. I think the NewBeeDrone AcroBee75 BLV4 F7 BNF comes with 3.0 but that’s DJI 03 build so not sure if that’s what you’re looking for. On the Pico I know I had to update the receiver on the board to 3.0 before it would bind.
@TweakRacer Жыл бұрын
If that charger made that funky "pop" sound every time a battery was un/plugged in... so worth it!
@Ndriana Жыл бұрын
Fake! We could hear it very well at 3:25 !!
@MiniMicroFPV Жыл бұрын
Haha, you make a good point!
@TweakRacer Жыл бұрын
Welcome back, Mike! If you did record a review with the Vista/NebPro, please upload for us plebs with v1 goggles (can't do O3 air units). Looking forward to your Radiomaster Pocket review too!
@MiniMicroFPV Жыл бұрын
Thanks a lot! I've put the original Vista version up as an unlisted video which can be seen at the link below. Some of the same thoughts are repeated between the two videos but anyone that wants to see it can use the link. And the Pocket has been pre-ordered so hopefully it will arrive sometime this month~ kzbin.info/www/bejne/a3PQXnullLtqY7s
@TweakRacer Жыл бұрын
@@MiniMicroFPV That's a great idea! Doesn't clutter up your content page, but still available for us v1 old schoolers (or cheapskates hahaha) :) Can't wait for the notification on your Pocket review! Keep up the awesome videos :)
@MiniMicroFPV Жыл бұрын
@@TweakRacer Thank you!
@TERBANGFPV Жыл бұрын
Glad to see you again..
@MiniMicroFPV Жыл бұрын
Thanks! Glad to be back with some new stuff.
@luisLP5752 Жыл бұрын
Can prop guards be added? Like from the meteor65 or 75 if you cut them off and add them, would they fit?
@MiniMicroFPV Жыл бұрын
Sorry for the late response! Unfortunately I don’t have the pieces on hand to say for certain if trimmed prop guards will fit on this frame. However between the 65 and 75, the 65 will definitely be too small for the 40mm props but then I think the 75 prop guards will be too bulky for the frame.
@johncgibson4720 Жыл бұрын
Thanks for clarifying that cc2500 means FrSky. I was not sure if cc2500 is good for my 3 FrSky receivers. I am looking into Radiomaster Zorro and Boxer recently. And their cc2500 version are the inexpensive ones.
@teknoy5417 Жыл бұрын
Can I use 4s battery on 1103 8000kv?
@MiniMicroFPV Жыл бұрын
Hmm. Probably a little too much. I would stick with 3S for an 8000kV in this size.
@giannipompeo8645 Жыл бұрын
hi i have the same...is wonderful...you have for me the PID Tunning?
@edenk86 Жыл бұрын
Can i do this fc to LR 4"??? like as GOKu 13A stak fc for flywoo explorer 4
@catmanfpv9213 Жыл бұрын
Do you think full-sized 2.5 inch propeller guards can fit in this frame?
@catmanfpv9213 Жыл бұрын
Do you think full sized 2.5 inch propeller guards can fit in this frame?
@sapata1871 Жыл бұрын
Awesome
@Therberg2500 Жыл бұрын
I have one of these cases and use it with DJI goggles V2 and a pair of Fatshark HOO2's. With the Fatshark goggles it will use the cell to below 3 volts with no issues but with the DJI goggles the voltage display in the goggles shows NA and they start beeping when the cells are at 3.4 - 3.5volts. If I unplug the case from the goggles and measure the voltage output it still measures 8.4volts. Not sure why the DJI goggles are not seeing that.
@ianturpin9180 Жыл бұрын
Sadly last march Russia destroyed Vladimir's workshop. His molds destroyed. And his stock of 26gr spread tow carbon fibre was destroyed. The only 26gr cloth in the world .designed by him.
@SpartanOfLuxon Жыл бұрын
The fact it doesn't save the last one you put on it is unbelievably lazy. "Hold on guys I have to set my channel AND reset my animation"
@stomptheelites Жыл бұрын
Out of Stock... Help Please
@perryphilip 8 ай бұрын
I know this is an old comment but they are back in stock right now if you're still looking.
@snapgarrett1 Жыл бұрын
I've had this thing for over a year and I'm just learning this lmao
@jakeclauson9863 Жыл бұрын
Can you install any analog camera on the firefly?
@Juice_The_Venom_Guy 2 жыл бұрын
What mode did you start off in? The middle? I put it in the second mode and it was pretty spicy.
@NE_Pigeons 2 жыл бұрын
What's a good budget friendly all in one kit for someone new? or If you were to mix and match parts what would you do? For drone, controller, goggles - whats the best bang for buck.
@captaindronieversefpv 2 жыл бұрын
can this motor use 4s battery ?
@MiniMicroFPV 2 жыл бұрын
According to the spec sheet, yes! However I have only flown them on 3S so I can't speak from personal experience.
@american7169 2 жыл бұрын
1 year later, how is the frame now?
@MiniMicroFPV 2 жыл бұрын
It's in top shape!
@american7169 2 жыл бұрын
@@MiniMicroFPV sweet, I ordered 2 of em yesterday
@MiniMicroFPV 2 жыл бұрын
@@american7169 Cool! It's solid.
@siphiy8428 2 жыл бұрын
Can you attach the link to these mounts? I have a 3D printer and I’d appreciate it
@MiniMicroFPV 2 жыл бұрын
Sure! Here is a link to some of my designs including both Insta360 GO 1 and 2.
@siphiy8428 2 жыл бұрын
@@MiniMicroFPV I don’t see the link lol