Ken Slaton

Пікірлер

@leofromthefire 22 күн бұрын

Cheers from New Zealand 🙏👍

@KenSlaton 22 күн бұрын

Welcome!

@glm777 23 күн бұрын

Keep on tryin!!!

@murphine969 23 күн бұрын

To prevent that, you should install vertical vinyl or wood boards running along the horizontal ones. Could even use metal, probably the thinner the better but if you use really thin metal runners you’ll want to brace those with extra horizontal studs and completely eliminate those gaps.

@KenSlaton 23 күн бұрын

@@murphine969 that’s why I put that plywood there

@elmiewho29 25 күн бұрын

This is Perfect this is exactly what i want to be doing to my trailer.

@KenSlaton 23 күн бұрын

@@elmiewho29 it’s works out pretty well if you have something to pull the skid with

@Faston 23 күн бұрын

@@KenSlaton4:20

@Faston 23 күн бұрын

Small wheels on the pallet and a wincch mounted on the end of the trailer may work. Good for any grasscutter for 3 season use

@KenSlaton 22 күн бұрын

@@Faston I’ve seen people mount a winch to the from of the trailer and run the cable under the deck all the way to the back and back onto the skid.

@Tylers_Socks 25 күн бұрын

Thanks!! I my horizontal augers won't turn. I think I snapped both pins. This video helped.

@KenSlaton 21 күн бұрын

Glad it helped!

@josuealicea5164 29 күн бұрын

Nice job

@CHARLESMAKEPEACE Ай бұрын

... if you go 1/2 90 for backside then 3/4 x 3/4 for the brick mold and finish off with completed measurement ( 2 1/4) it comes out perfect...and make it in two pieces to keep the complete profile and caulk down seam if needed/wanted... i've spent 30 years wrapping windows, doors, louvers, fascia, eaves, and everything in between, we even figured out how to wrap round , oval trim where it looks reasonably good.. almost everything these days is pre fab composite wood or pvc, so this is definitely a fading art..keep at it

@KenSlaton Ай бұрын

Thanks will have to try that on my next door!

@toddd3648 Ай бұрын

What a bunch of inconsistent information. Toro does NOT use shear pins in this or similar models as stated in their published videos. They do not expect these bolts to break. Their videos way that the engine should stall in "jam" situations. The bolt is: ".250-20X1.750,GR5,YZ" . And apparently grade 5, yellow-zinc chromate plated. Grade 5 relates to the strength of the steel, and the yellow-zinc plating is for corrosion-resistance. The fact that bolts are breaking and the engine is NOT stalling leads me to believe this is a poor design. I just drove out a piece of a broken auger bolt and see some deformation of the auger hole... another indication of a poor design.

@xrpxtrariceplease2811 Ай бұрын

Just received my Toro 824oe from Home Depot free delivery. The box was upsidedown in the truck . When i open the box the oil was already in the machine. Should I return this unit since the machine was upsidedown and fill with oil all day in the truck? Should i worry about the engine ?

@KenSlaton Ай бұрын

Personally I would return it and get a new one. It’s not worth trying to fix because as soon as you do start to fix it you have a harder time returning it.

@xrpxtrariceplease2811 Ай бұрын

@ I am waiting for a replacement. Don’t understand why they would put oil in the machine when you know people will mishandle it when delivery by freight company

@mikeshanley8570 Ай бұрын

What happens when you have to trim? No room to haul away the junk on the trailer.

@KenSlaton Ай бұрын

Typically i know about it ahead of time and might only take one mower and have room on the front. If not then i'll stuff it in the bed of the truck.

@Mopar_GoCar 2 ай бұрын

Nice video, dude.

@KenSlaton 2 ай бұрын

Glad you liked it

@KujoYardwear 2 ай бұрын

Nice setup! 👏

@KenSlaton 2 ай бұрын

Thanks!

@KujoYardwear 2 ай бұрын

@@KenSlaton You’re welcome!

@CristianRoman-i9q 4 ай бұрын

Where did you get orange tubes from

@KenSlaton 4 ай бұрын

If you are taking about the gate assist i got them on amazon. They were originally yellow but i repainted them to match the other attachments.

@nickster0007 4 ай бұрын

Who doesn't love working on a vehicle on a dirt driveway!

@KenSlaton 4 ай бұрын

A good piece of cardboard is worth its weight in gold

@c50ge 5 ай бұрын

If you paint the trailer try using a mini foam roller. Really fast and you don’t overspray everything you don’t want paint on. A couple of thin coats. Rustoleum works great

@KenSlaton 5 ай бұрын

Thats what i used on the expanded metal! Then a brush on the rest that i couldn't get.

@cadenconverse15 5 ай бұрын

I run the fs 131 r. And its amazing. So much power

@Max.Crowell 5 ай бұрын

Have you had any problems with the 94r? I’ve seen online that the 94r is prone to many issues. Trying to decide between the 94r, the 111r, or the echo 2620.

@KenSlaton 5 ай бұрын

That one is actually the 111r. Never had any issues at all!

@jvenema86 6 ай бұрын

so wonderful beautiful video Ken i love it see so nice have you instagram?

@jvenema86 6 ай бұрын

so wonderful beautiful video Ken i love it see so nice

@Zeroturnlawncare 6 ай бұрын

Nice my man keep it up. No sub. Will support

@KenSlaton 6 ай бұрын

Appreciate it!

@jordanhowell9567 6 ай бұрын

similar to my setup, I should do a video, alot of good points in this video

@juicewrldunreleasedsongs9944 6 ай бұрын

It is not safe to have the gascans in the incloe truck

@KenSlaton 6 ай бұрын

Its the same thing as having them in an enclosed trailer. Ive never had an issue

@striveforgreatness8555 6 ай бұрын

Love the set up! What brand is the push mower. I too try to avoid push mowing when I can but some spots it just makes life a little easier. I just have a hard time spending $400+ on a push that seems to only last a couple seasons and none of them really cut so great. I have bought yard machine and now Toro but the Toro is just as crumby as the yard machine, just more expensive. Long and short I am looking for a more durable brand if possible. My main mower is a 52" Scag Patriot

@KenSlaton 6 ай бұрын

It’s a Murray with a Briggs and Stratton engine. Bought it from Walmart with side discharge and bagger. Was about $300 5 years ago

@pristinegrounds 6 ай бұрын

Good looking setup 💯

@KenSlaton 6 ай бұрын

Thanks 💯

@TwoAcresandaMule 6 ай бұрын

Good luck man

@KenSlaton 6 ай бұрын

Thanks! Its worked out so far this year

@crosscutofficial 6 ай бұрын

Dude, I’m jealous! I’m solo and I’m running a John Deere Lawn Tractor, two trimmers, edger and backpack blower. My trailer setup is small, 5X8 with a trimmer rack recently added.

@KenSlaton 6 ай бұрын

Gotta start somewhere! Those 5x8's are nice because they are very low cost. Pain to back up though.

@crosscutofficial 6 ай бұрын

@@KenSlaton yep, I just added a trailer jack to mine.

@bigsonslawncare 6 ай бұрын

I think 48" is ideal! Nice setup you have there👍🏾

@KenSlaton 6 ай бұрын

I think so too!

@Kielbasaman206 6 ай бұрын

Nice setup

@KenSlaton 6 ай бұрын

Glad you think so!

@wallyallyn5473 7 ай бұрын

When you're doing close-ups with your camera you need to move your big head out of the way so we can see what you're doing but I like the video I like that junction boxes down in that trailer

@KenSlaton 7 ай бұрын

I try to do what i can. In a tight area like that its difficult but thanks for the feedback!

@Sandritominilawncare 7 ай бұрын

Thank youuuuuuuuuuuuuuuuuuuuuuuuu sir

@wallyallyn5473 7 ай бұрын

Wow I wish you would show how you made it as far as the materials and everything

@KenSlaton 7 ай бұрын

Simply just used a bunch of spare angle iron and a small section of rebar.

@LorenoArredondo 8 ай бұрын

Can you please do a video of the mesurements

@KenSlaton 8 ай бұрын

Will be posting a lawn care setup video soon with those measurements!

@abubresss 8 ай бұрын

good job

@KenSlaton 8 ай бұрын

Thank you! Cheers!

@debrachase3131 9 ай бұрын

My auger bolt sheared. How do I get the sheared bolt out, to clear the hole for the new one?

@KenSlaton 8 ай бұрын

If you have the replacement bolt just line up the threaded end with the sheared bolt end and send it home with a hammer. It will then knock the old one out and also install your new one. Or take a punch to knock it out.

@terrymiler2164 10 ай бұрын

You need to push the clutch in to engage the pto.

@KenSlaton 9 ай бұрын

I realized that right after i turned the camera off. It somehow slipped my mind.

@stewart4711 10 ай бұрын

give me a 6 pack ill be on the tractor

@stewart4711 10 ай бұрын

ford tractor oh yah id help you getting running just to ride it around

@KenSlaton 10 ай бұрын

She runs like no other now. Need a rear rim to drive it now.

@teamdrummond6915 10 ай бұрын

I eat bees...lol! Love the video!!

@KenSlaton 10 ай бұрын

Thanks for watching!

@MarieSankus-ku3de 10 ай бұрын

Audio too low & didn’t show how you got the broken pins out & new ones in

@KenSlaton 10 ай бұрын

Didn't have to remove broken "pins" (which are just grade 8 bolts) because when it sheered them off they fell out before i did the repair.

@oubesto 10 ай бұрын

See link from Toro that states their machines do not use shear pins kzbin.info/www/bejne/aGq3ZadumLafeZI&ab_channel=Toro

@oubesto 10 ай бұрын

Interesting comment you make "I have never done this before, but I'm going to show you the best way to fix it" 😁 Toro part # is #321-10

@KenSlaton 10 ай бұрын

I like to be 100% honest lol

@Tantaku 10 ай бұрын

do you have a lnk for the exact bolts needed?

@KenSlaton 10 ай бұрын

The dealer told me they are just simple grade 8 7/16" bolts. I believe part number is #321-10 but i could be wrong.

@Great_unkle 11 ай бұрын

I’m still trying to figure mines out 😭🤦🏽‍♂️

@KenSlaton 10 ай бұрын

Once its out of the box its fairly simple!

@Rebel9668 11 ай бұрын

A good practice if you know an ice or snowstorm is coming is to raise your wipers away from the windshield in the position you'd use for changing the blades. They're much easier to clean off that way, the windshield is easier to clean and they'll then work when you need them to. My snow thrower is an antique but it still works well. A 1965 Ariens 10M4. It'll drive itself up the ramps into the truck, you just better hope you can still reach the clutch to stop it when it gets up there, LOL! Fortunately I'm 6'8" so it isn't a problem for me but someone like my Ma would have to walk up the ramps with it.

@KenSlaton 10 ай бұрын

Its been working out with the ramps pretty good. Im 5' 11" so i just stop the machine when it reaches the tailgate then push it from there.