Thanks! I followed your steps and was able to fix my mower. 👍🏻👏👏👏

These are banned in most states as they allow raw sewage to run right into the water table .AND it only last about one year or so ?? Good luck

I like your review:). Thank you.

I've tried these things in the past, but they never seemed to help. Perhaps the beads I got were defective?

Appreciate the review. Came to KZbin to see if this was the right filter setup for me (same issue as you mention at beginning of video) and you helped me make my choice. Also you mentioned Amazon- it’s $20 cheaper there than my local hardware store. I’ll be ordering today! But… I’ll spring for the SharkBites. Just laziness on my part. Thanks again!😊

What if it don't work? My grandpa changed the battery cables and it came on. I've rebuilt the tranny is was fine, I've clhas the ignition switch changed and it was fine 🙄🙄

You loop the wire a couple of times then close the ferrite.

How to program the coffee machine

I still can't tell how the springs go in ? Help please

I installed this filter at my water well to remove sand Much larger than old unit. I turned to top knob 40 times with wrench and recognized that knog was screwed up so I pipied it so I never will use the knob. My layout was 21"x21"x21". but I could have made it smaller to fit inside std plastic storage container. During warm months, I keep a heavy contractor garbage bag over the piping to prevent algae growth in the filter. The downstream pressure guage pokes out via a small tear. During cold moths, I insulate wrap all the piping and use loose insulation wrap to protect the filter and fill up up the second bag. I used vegetable oil to lube O ring as food grade silicone oil can only be bought online for $$$. My piping is all 1" PVC My piping is union, tee with3/4 hose bibb to blow sand out of tank,pvc isolation valve, FILTER , pvc isolation valve, tee with 3/4" connection for pressure gauage and finally union. The filter is mounted on a 4x4 that is about 3 feet in the ground. I use Tru blu for the pipe threads on the filter and on the hose bib and pressure guage connections. I used Otey primer and high performance cement and allowed 12 hr setting time, Very careful about gluing, so check video before starting. Blew well clear of sand via hose bibb before running water into filter. Not a single drip. RUns perfectly.

I used this same filter housing and it worked great for 5 years. It failed after the plastic molding seam on the top separated. I am not the only person that experienced a failure like this. Great video though.

I had this problem this morning & after looking @ ur video my H3 started right up!!!!!Thanks a lot my guy

if you have enough cable its best to wrap it through the ferrite, go through, wrap around and through again. will work way better.

I bet this guy commits the ultimate sacrilege by eating cereal without milk

what exactly is the purpose of the blue handle on the top, why would you turn ?

I would choose a 5 micron filter, not a 25 micron.

Settin at the store waiting my 10 minutes Il try this when I’m at home. Mine is a 2008 alpha hummer it’s mid July and it don’t want to start 😔

I never put the pot in the dishwasher. Always wash by hand.

They don't call 'em "crapsman" for nothin!

5 years later... Do you remember if they road force balanced the tires or at least broke the tires down and rotated 180 degrees on the wheels?

Long shot but if ambient temp air you could have a puddle inside the air. Some places have switched to inert gas because of this. Dont know how cold it is there but if its water it could freeze into a big chunk.

I install the filter, the arrow is pointing on the direction of my well, i let the faucet open the whole time, after finish everything, i dont see no water flowing inside the filter, like you are showing, am i doing anything wrong? Thanks

Lol, you are a champ and so honest, I just bought it for the price, so ill install it this holiday coming when I'm off, and I'll come back to your channel for tips, thanks a lot

Thank you!

If GM does not give a f about fixing their products, they don't deserve my business

No more GM vehicles. Been an owner of this POS for more than 14 yrs now and still the same issue.

Is it rain proof? Can it be installed outside?

Thanks😊

This worked for me. I was going to lose it! Thank you!

I purchased one for $51 had a small ding on the side

Looks good to me

Well, it doesn't take a rocket scientist to design a lawnmower... 😊 but seriously thank you very much ❤😊

5:55 was awesome

Thank you so much, you just saved me a lot of time.

On a seepage pit we use caustic soda. Would that work on a leach field ?

thank you!

Worked the first time!!! Thanks so much dude!!

Thanks I never heard of this I’ll have to see if anyone here can do this , yes am having trouble!

I need the whole control box that handles broke, and I’m having trouble finding that on Amazon

I have to shove my gear shift up into the park position (even when it's in park) really hard and it unlocks.

ebay 59.98 more cheap that idiot amazon there thief

I clicked on my volume off button on the speaker volume and it went away. 😂 Didn't think that the buzzing noise was coming because i had aux cable connected.

😂😂 It only makes sense to turn off water flow from system before changing out old filter. 😂

Thank you

Work for me. Thank you

Great instructional video for a very common problem... thanks!

Excellent video! Thank you!

Excellent video! Thank you!

Салам

one thing. when u change the filter dont wrench tight the housing after. all you need is hand tight and greasing the o ring. wont leak. i almost couldnt get the one that was on there off from the previous owner.