Hi Frank, We are located in Woodstock, GA, not too far from Greenville~ You can contact me at 678-SevenFiveEight-0319 and glad to chat with you. Thanks~ John

I'm sure I've mentioned it in one of the videos although never broke down the "colors" You'll have to get a wiring diagram and figure it out, but basically get power back there, tach signal, coolant sensor I just used the Porsche one tapped into the GM block, Tach signal which I used an aftermarket box called "Tach Adapt". Fuel pump wiring is hardest as Porsche uses a positive ground lead so you have to rewire the Porsche fuel pump relay so the GM system triggers the fuel pump properly. Basically just strip out everything you don't need from the Porsche harness, connect the GM stuff and boom. Good luck.

That's awesome! Unfortunately there are not a lot of resources out there... I would start by talking to the big shops doing the swaps, Renegade Hybrids and Chavis Performance. KZbin is a great resource and you could also check over at the 986forums. Pelican Parts also have a swap forum where you may be able to get some good info. Best of luck with your project, hopefully I'll have another one to share soon!

Yes and no - Bursch headers and hand made muffler although I don't recall the manufacturer, I'll find out and let you know!

Thank you ..I'd appreciate that.​@@random816

Hi Dwight, send me an email to [email protected] and I'll get you our contact details, thanks!

Thanks man!!

Yeah I'm sure it would! There are other companies making parts now too so check around, I think a company called Chavis Performance is making some good parts too. Biggest difference would be the clutch flywheel so just check with Kennedy Engineered Performance I'm sure they make a kit for it. Good luck!

I'm sure there are some who would do it but none I know of off hand. We are working out of a private shop in Woodstock at the moment and are a few months behind but can put it in line with the other projects if you want :)

I've not done a swap on a 987/997 yet so couldn't really quote it. Definitely be interested in taking on the project if you want to talk about it though! Thanks! John~

Thank you sir! Call me and come by sometime!

Thank you sir! You're welcome to come by anytime!

Thank you so much! I'll try to keep the updates coming!

It did extremely well! Had coil overs and weighed in at 2950 pounds~

lol are you talking about the mustang? The 700+HP stage 3 Roush racing with drag tires? Best race was with the yellow Corvette which was neck and neck... that car made 500 RWHP.

Hey Tim, thanks a lot, I appreciate it! I've been working this year opening my own shop and are currently working by appointment only. Shoot me an email at [email protected] and I'll be glad to chat with you about your project. Thanks!

With the stock suspension you could definitely feel the car was overpowering the tired stock suspension. Once I upgraded to coil overs car handled amazingly!!

Thanks! ABSOLUTELY! Probably one of the most awesome cars I've ever had, I will build another!!

@@random816 I was wondering, how is the alternator charged? I did not see a belt. This video makes me wanna build one too lol

It is very possible but without knowing the Cadillac motor I'm not sure. I was looking into swapping in the V6 Camaro motors for a bit and think it can be done, but it is a tight fit regardless... good luck!

@@random816 I really appreciate the response......Do you mind if I ask more questions as I get into it and hit snags?

Thanks!! They are BBS RS wheels available through Tire rack for about $400 each~

I added a Porsche coolant temperature sensor to the chevy motor. On the cylinder head that does not have the GM sensor, it has a tapped spot for it on the opposite head. rill/tap it for a 14x1.5 thread pitch and add the Porsche sensor. Then just hook it up to the stock Porsche wiring. Easy peasy.

Drill/Tap~

I noticed you said you used a 2002 Porsche wiring harness that used a 2 pin sensor Mine is a 4 pin sensors My issue is to locate the wires that goes to cluster Would you happen to know which color wire is the wire that goes to the cluster ?

Most of the mounting bits were purchased through Renegade Hybrids... Lots of good info throughout my videos and on the 986forums.com where I did the documentation for it... should be a direct link in the info section of some of the build videos... Good luck!