Truck drivers don’t take 54 minute breaks they take 10 hour and 34 hour breaks so to justify the cost of this? Us drivers need to know how to make it run that long?

I bought 2 of the brand new Egos 22 inch and returned them. They both had 1 wheel that spins freely, it also sits highER than the other one (front) After shopping and shopping it was best to try #3 by Ego. It also has the SAME PROBLEM! Has anyone else noticed? I emailed them the video after calling them. Tomorrow will be day 3 no RESPONSE BACK. Why did I pick Ego again? I just didn't want to wait TWO HOURS for the Milwaukee battery to charge. That's ridiculous! So, I only used the Ego because it is new and came not fully charged for maybe 10 minutes. It seemed to chew right through everything at ease!

Thank you for the video! I honestly think that this is a very expensive product that is still in beta development. All of it's "wonderful" features seem to complicate the very simple process of vacuum sealing. I have been vacuum sealing for 30 years using all sorts of machines (I get to test and review products). Most newer machines will do moist and pulse settings. The "liquid" mode seem like nothing more that a short pulse followed by a seal. It is hard to know why this machine would cost almost $400 retail. At that price you could buy a chamber vacuum sealer which will seal with a greater vacuum, and also handles liquids and powders (like flour) very well. I bought a chamber vacuum around 2 years ago and they are super. Mine was less than $300 (Chinese off brand). Best of all, the pouches for chamber sealers are in the 4-12 cents range (depending on the size). Just my two cents.

I have the GW60V. I live in missouri and the grass is thick and strong here. It works great as long as i don't miss too many mowings. Just wish they had bigger amp batteries available

This seems like a step back from the AC200L. Thanks for the video, always very thorough.

Would love to see a comparison video against the Anker F2000!!

Ryobi has gotten so good it rules the market

Thanks for the demo and info, have a great day

Good video!! A question 🤔 can I add one battery to increase power???

I do disagree with spec sheet, page 2, where you showed run time claim and put unlimited with gas for the Honda. Gas run time is not unlimited. My last gas mower I used was my uncles and it was a high quality Husqvarna self-propelled mower. During a mow for his lawn, the gas would run out. I sometimes would be close to finishing but would have to stop and go to the shed and pour more gas in to finish it. With my Ego mower, the battery also usually dies before finishing my lawn and I can go to my shed and pick up an already charged back up battery and put it in the mower faster than the time it would take to add gas, and with no mess.

I'm not being a smart aleck; but it seems like you've NEVER had one go bad yet. Have you? And if so; what size was it; and how was it employed?

I almost agree with the 'push mower' comment. My self-propelled mower is so light; that I hardly ever employ the self-propelled mechanism.

I absolutely love any of your videos. Always very interesting and good video and information. I wanted to tell you that I love always seeing Brooklyn in your videos and please remember that she is always and forever in you and your family's hearts and minds moving forward as you move forward together. Thank you for sharing her with your fans.❤

still don’t know the difference between the black high lift blade vs the green one. Weight? exit: nevermind, it’s single vs dual blades

Like this comment if you think this guy sounds like Howard Stern lol

you put the paper towels on backwards.

It works with my V8 Motorhead, it’s great!

El review que necesitaba, gracias 👏🏽

*DeWalt should give the base a female cross-receptacle so it can be turned 90º for a zero offset, making it ideal for jacking things needing a 0" flush setback. Then the front of the foot would not be an impingement! DeWalt, if you make a revision, please send me a complimentary revised jack :-)*

*DeWalt should give the base a female cross-receptacle so it can be turned 90º for a zero offset, making it ideal for jacking things needing a 0" flush setback. Then the front of the foot would not be an impingement! DeWalt, if you make a revision, please send me a complimentary revised jack :-)*

How long does it take to charge the delta 2 with delta 2 Expansion battery and delta 2 max with delta 2 max expansion battery from zero to 100%?

You mentioned not to leave the batteries on the charger for storage.Can you leave them on the charger for storage as long as the charger is disconnected?Thanks.

I recently lost my wall adapter well camping. Do you have any advice what i could purchase for a ac/dc adapter R300 replacement? lovely video. Being in Canada i learned a lot

wonder if you were able to get the new stand seperatley and install on the old gen 160w panels?

My ego 2.5ah battery is stuck in self-maintenance mode. How do I take it out of that mode?

Why not cover the middle part with plastic and then use hose for cleaning to protect the electricals.

what are the specs on the fridge

Excellent review. Converted to Ego blower, edger, trimmer, hedger recently after my gas powered trimmer died. Very pleased with the transition and now closely following their mower reviews. I wonder how these hold up - what's the oldest one out there? Paid $219 for my Craftsman in 2002 and it still cranks on the first pull. Hard to come to grips with a thousand more for something that's guaranteed for 5 years. Mower aside, I'd expect the battery to not last (with any reasonable endurance) longer than that. For what it costs to replace the battery I could buy TWO current-model Craftsman mowers.

Great videos! And thanks for using both metric and ‘our’ version of the number break downs 😂 (as a side note, has any one every mentioned your voice sounds uncannily like Howard Stern? )

Love ego but the lack of service centers are a big strain on me. I use their commercial line and theres only two service centers in my area...in the whole metropolitan area...only two? There's 5 million people in my area...and again...only two service centers? Both of them are understaffed as well 🤦🏿‍♂️

Ryobi all day long with 9.0 amp battery

Lol, welp, I was doing none of these except taking them in during the winter. I immediately went out into the garage and removed the batteries just sitting in the tools and on the chargers and found some proper storage for them when not in use. Thank you for all of the tips! I'm not sure if this is a good one to add, but I have bought two additional batteries from Facebook marketplace that were brand new and for about half the price. Buyer beware, of course, but they were excellent sellers.

One of the biggest factors in EGO battery health is the battery temp. Charging indoors after resting has made a huge improvement in my batteries performance.

Your audio says, and also shown on screen, that #2 hgt is 3/8" and #3 hgt is 3/4". I think you meant 1 3/8" and 1 3/4".

Thanks for the great review. Do you know how many amps the 12 volt DC charging port accepts? Much appreciated. Liked an subscribed.

Great tips on maintaining battery life! I didn’t find the battery model numbers or recommended battery for each tool to be very valuable. The pace is slow, you can easily watch on 2x speed.

Another excellent video. Thanks for all the great information 👍

Thank You!

So can I use a 10amp on the mower and blower and string trimmer and hedge trimmer ect…

Milwaukee all the way !

Love all the tip and really love that now that this video is out, your able to now educate the new generation of people who are going to youtube to see about these new machines and the battery’s that power them, i can tell you 7-8 years ago, we didn’t have anything like this and nw we have a treasure trove, always a great video my friend a nd keep on going and making even more and more awesome videos

so as living in a RV since 1988 let me tell ya this new stuff is great how ever u will always need a gas generator as a back up plan i did buy the dual fuel generator that i only use propane with as a back up but i have 2 echo flow max omg such life savers.

Not overly impressed, but I am always interested in adding to my Ego collection (5 tools). I'm gonna give it some more time in "the field" to see additional customer reactions. 1st - Interior isn't smooth, just like the underside of their lawnmower (which I have), which makes cleaning more difficult than my cheap Rigid Shop Vac. 2nd - $50 for replacement filter? That's ridiculous. I'm no Rigid fanboy, its just what I happened to buy years ago, but I can get filters for less than half that. 3rd - $300 with no battery or charger? That's very high. 4th - The last time I spoke with their customer service, it didn't go well. They're the Tesla of cordless tools, but the cost premium is high. I appreciate your review. Thank you.

Definitely buying this instead of the overpriced $200 Vicking Jack. At least this jack comes with full assembly. With the overpriced Viking Jack, you have to assemble the foot base yourself. Paying $200 and I have to install the base. Crazy! Lucky if they remember to pack the screws with the package. I have to return the overpriced Vilking once because the screws were missing from the package.

Love the Milwaukee brand and have 40 pieces of equipment and love every one of them !!!

What an exceptional video presentation! - "Success unfolds as an ongoing and evolving adventure."

Thank you for showing the tested refrigerator specs. Too many leave this important detail out. Very well done and explained.

Great, informative video! Question, I live in a tropical climate and have dense low grass. I usually place a 25lb weight on my mower to get the blade low enough. Im thinking if replacing my blade as it is beat. I have the standard mowing blade. Im thinking of high lift with a bag. Wondering if high lift would draw the grass up to be cut. Thoughts? I know I should really spring for a reel mower but I won’t go back to gas and a Sterling electric is about 2k last I looked…

How do you keep your mower and chainsaw SO CLEAN…..LOL ?! It looks brand new, never been used. I clean mine but it never looks new .

I use a Ryobi blue bristle brush attached to my drill cleans it fast the blow off.