Another great video mate.

I could have lots of fun with one of these but I don't have the room, just as well as I have enough projects to finish 😒Great vlog and review though and I can see you using this a lot! Keep up the great work, thank you, Richy 😀👍

you'll have to get some leather offcuts to play with

I can see some signs being lasered with led lights behind them coming up. I have a little 5w laser I've had for a couple of years brilliant bit of kit. The hardest part was learning light burn in the beginning but such a big program still learning. So much information on you tube at your fingertips now days though. By the way how is Mark going with his piles. Steve

Once again…a great ‘no nonsense’ vlog for the set up of a great piece of kit! I’ve been using a Sculpfun laser for just over a year and they’re great for template making! With care you can cut anything including card and paper! In fact I’ve seen several Pinterest ideas for burning logo designs onto coir door mats!! I’d recommend air assist and low power though! Enjoy …it’s a great underrated workshop tool! 👍👍👍

I wonder if this would work to knock rust off of tools?

😆😆 Welcome aboard Rob. Great video. Looks like you got a great bundle there 😃. Thanks for the shoutout. And i love your approach of doing it off the bat and not getting saturated with advice from others (its the absolute best way to learn). A great display of its capabilities, you should get some good feedback from Creality for this one 😁. Have fun with it and stay safe mate 😁👍. (Shout if you need anything 😁)

What a cool tool. Thanks for the review and how to. Looks like you'll be spending more time in the shed! I think you're going to need a bigger shed though. 😂

Hi Rob, New toy mate, looks a good one. Now the ideas will be endless brackets and fixing you can make for the shed, tool holders shed signs if you think about it you can make it. Looks straight forward to assemble and easy enough to use, now go and have fun. As always a great video, catch you soon Take care

Great video Rob. Now, I have a question. That camera… It’s being used to position the engraving on the workpiece. Could you drop a spanner on a piece of material, & trace around it in Lightburn? Like to make a cutout in Kaizan foam, or plywood to make inserts for a toolbox drawer?

Wow! Beautiful machine! Endless possibilities there Rob. Fantastic! 😃👍

have a go on some slate with your logo on , nice and cheap b&m

I was wondering what that would set you back

Cracking video rob you smashed it. Got few more bits and tricks can give you as well as 300 files like i said although i want that rocket file in return 😂 hit me up when you can we can sort a video call or sommit oot cheers 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

Cut a round hole out of your shed with it for the flexi vent/exhaust 😂

I knew it 🤣 welcome to world of cnc and lazers lol

Hey Rob.....fair play to you mate....... technical things are not my bag....im such a luddite ....I only recently got an Alexa thing because they no longer played Greatest Hits radio on my telly!!!....... I would like one though......one day!

Hi Rob… Early Christmas Presents..😂Gee wiz looks some piece of kit. A huge step up from Parkside😂😂

Great news on the free tool! I hope you have hours of fun with it, and don't blame you for taking it and making content/thingamajigs with it... However, I came to the channel for the cheap and accessible tools, and this is far from it. There are a million and one channels out there that only buy the most expensive tools that only someone with an acre of land and an airplane hanger could possibly afford. So I will skip this video personally. Please don't take this comment the wrong way, I don't blame you for doing it.... I will just wait for the videos that I subscribed for. Cheap tools, and shed bodging. Love the channel, keep it up

One thing better than new tool day Free new tool day well done Rob 👍

I f**ing knew it. Just about to watch if you need any help advice or files youve got my email 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

I wonder how much I’ve missed out or got wrong this week 😂.. comment, it helps me and others . Thanks for watching.. there are millions of KZbin videos out there, I’m blown away by the fact you watch mine. !! Comment if you like Like if you like Subscribe if you like CHEERS !

Those rubber/plastic treads will turn brittle after twelve months. I removed the stuff on mine and the steps are still going strong (with care!)

They're absolutely amazing. I don't know why these aren't promoted more. Much better than a stinking wood burner. No pollution, no mess, easy to use, lights at a press of a button. So much better

The Works is normally where I grab batteries, 8 panasonic for a pound. Wife is obsessed with the Christmas lights so goes through them like there is no tomorrow. I did buy the elastic stuff at our local independant discount. I cannot remember what I used it for in the end. The fact I have not found anything fallen off or leaking, then it must have worked. 😂 Thanks for sharing.

can this particular foam be used around or near. gas/hot water pipes. i have done that when sticking plasterboard to wall

It's your malcolm mcdowell hair cut off star trek generations 😅

I see "makers" and the like to be far too generic. That said "Sheddies" is your brand. No matter if it's a shed, garage, workshop or corner of the living room (me), your fans are Sheddies

Another cracking video mate :) I spend way too much money in Poundland :)

When the round feet fall off that set of steps pop bottle lids work well :)

I'd stick with "sheddies" I mean you don't really want to call the people who watch your videos "tools" ;) :) Makers is a good catchall though :)

Thanks Rob, it takes getting used to the fact that it's not all £1, I still walk round thinking blimey that's a bargain then look at the price - Doh ! Tbh beef they put the prices up it was getting a bit silly with the shrink-flation - smaller and smaller packs of everything - a few years ago you could get 8 tubes of CA glue for £1 ! You've got to remember to compare like with like with the batteries as those Kodak are Alkaline, I don't think the Panasonic were ( Zinc ? ) and don't you think 9 is a funny number for a pack !

We all have to start somewhere! Seems like you are picking it up really quick!

Good luck getting them to stay on your magnetic holder. You've got me wondering as to what I would use them for.

Well done xx

In the aviation world these dental tools are invaluable. They are great for fishing out broken lockwire and making sure holes are clean. The uses for them around the house is endless. You could even do your own teeth in a pinch, lol.

So useful for the jobs you described and many more as well. Time to replace the couple of old dental picks I have been using.

Have a couple of sets of small picks and although they have many uses i highly discourage using them to remove lint/fluff from your phones charging port ............only plastic or wooden picks ,remember the charging port is connected to the phones battery

Nice one rob they look good need get myself a set each these be perfect for live edge clan up and getting into voids in a slab of wood plus maybe even digging bits nails out of pallet boards 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

New to your channel very enjoyable hammer looks great

I use 151 spray paint all the time i get it in packs of 3 from amazon and I've never had issues with it

Iv had the halford socket set for over 20yrs.. in that time iv broke two ratchets, took them back to halford and they replaced them instantly.. no quibble.

Hi just found the channel and like your style so you have a new sub

FAIL = First Attempt In Learning 👍

It's great to see you trying different cheap shops.

I have a syringe epoxy like yours called Rexan it states 15 to 45 mins to cure! 4 hours later it was set.....ish

I’ve just treated myself to the red Halfords tools box, also ordered the Halfords advent calendar Did you see Lidl are doing a Pizza cutter in the shape of a angle grinder Enjoy the videos Richard

Hey Rob...... I worked in a dental lab in my teens for work experience in the 70's (didnt go into it though) and was given a set of picks which I still have .....have been using them for carbon cleaning on piston grooves (two strokes) since then as they do the job perfectly....of course they have many uses....good purchase.... you will find them an essential part of your tool armoury.

Just a thought…if these are metal why not try magnetising them for times when that fiddly nut or washer has dropped behind something?

Well done my friend 👍