Hey Mr Dustin it Mike Gordon from Oxford I bought a feeder i think a 30 feeder but it has like a very small timer that runs of i t 4 AA batteries and bought the kit to be able to see how much feed is in there a if it jams i like to stay out woods really till rut but I think I should of bought like. The feeder timer in the Moultrie pro the main question is ther like a sim card in the kit and you download the Moultrie app a you can watch it at anywhere or do you Moultrie cell camera to be able to watch the feeder option thanksmr Dustin it's a wonder idea

I really appreciate your video I rewired my work trailer according to the plug and it was all wrong this was super helpful

Perfect unboxing thank you God for ppl like you

Alot of help, thanks

For only $1500

You do get a wrench

Your information helped me understand at least the plug. Horses managed to rip the trailer/truck hookup off the the trailer. 2 axel, with brakes controller. I can't back down.gotta reinstall the hookup. Thank you. I'm a bit encouraged.

Thanks. I believe i found the same light on Amazon for 24.99 each.

Thanks Mr 🍎, good morning from Knox county Indiana.Thanks for the information on the coolbot. The six year review was the last nail for me.

So what if your truck has independent turn and brake lights on the truck side?

is this video for dyslexics'?

We had a big wind event in May 2024. I never had a need for a gas chainsaw. We needed to be able to cut up trees out of the street. I had a 3.0 amp battery and two 5.0 amp battery. I was able to clear the limbs out of the street and cut up for city to remove. It has performed marvelously. I have now the new 12.0 amp battery that should let me cut for a long time. The tension adjuster/blade removal system is Hands Down the best I have ever seen. NO Special tools or screw drivers are needed to tighten.

Excellent video, cheers Chris from England 🏴󠁧󠁢󠁥󠁮󠁧󠁿 uk

Great teaching

Benchmark Abrasives has an aluminum (non ferrous)blade that works on that saw for $17.49. It works really well, clean cuts. I enjoy your aluminum and tool videos. "Have a good day and a better one tomorrow. I'm 10-10 on the side".

Does the chain saw come with a battery or do you need to buy one separately? Does it leak chain saw oil when stored?

Hello @DustinApple! Great vid! My trailer is wired fine. Bought it new so I have no problems on that end. My truck, has two 7-plug; one on the bumper for the receiver hitch and one in the bed for gooseneck or 5th-wheel trailers. That one in the bed... ain't quite right. Do you have any vids on the plugs on the truck? I didn't see any but just wondered. Thanks!

Thanks for your time sir. I just bought a brand new trailer from Big Tex, and they wired it with alligator clips and all the colors are wrong. I just ripped everything out and did it myself. Heads up, they sell junk. Lessons learned I guess. Appreciate your wisdom and inclination to share the information. Can't thank you enough!

Thank you very much for the video. If I am trying to back up my triple axle trailer using a tractor that does not have a trailer light package. How can I release the breaks using only a 12v battery? Wire up the +, -, and the reverse pins?

fucking baddass unboxing.. lol

Very well done. thank you

I use that same wheel. Using the drill, come in at 45 degrees to the edge of the blade and cut the tungsten. Nice and clean, and you never wind up with a cracked tungsten

Hi Dustin. What a good idea this is, getting a diamond disc for the angle grinder. Like your thinking, I'm going to get myself one for my grinder right now. Respect to you, David.

Thanks.

Wow ‼️ THANK YOU ‼️

They should have added a female plug so u could use all the batteries if say u had no power u could plug in a fridge my neighbor has the Milwaukee one and it does that I live in Florida and we just got hit by the hurricane and that’s what he was using to keep his fridge running

Have you ever tried anti seize lubricant on the limb bolts instead of the thick paste type grease ?

well I just bought one of those I'm going north on a vacation I figured I can find down branches and quickly cut them to a length I can toss in my pickup I hate directions thanks easy peezy

I do a lot of spoolgun because I do reefer repair. I also do a lot of mild steel and stainless. I have 2 Everlast machines, the 251Si and 255Si. I think the Millermatic makes the most sense for my next move. If I need to do any SMAW I have my Lincoln SA 200 Blackface. Thanks for pointing out the use cases for machines.

Nice video. Thank You. One suggestion: Add a link to the equiment - it will give you some affiliate income too. Thanks again

You rock. Made that shit idiot proof! Cheers

So how do I hook up my transfer pump if I went to put the wires from my pump (black and red) to a 7way plug, that way It’s not permanently hooked up to the battery

No work for my 😢😢😢😢😢 l burd my red

You are the only guy that tells clearly how to do this!! Finally...thanks!

Thx Dustin. I am confused here. My understanding is that aluminum should be done using spray transfer not short circuit. The sound should be a hiss not the sound of frying bacon,. Frying bacon sound indicates short circuit. Please inform me if I am wrong. Thx

Went through two chargers, each lasted 6 months. I have moved on.

For aluminum Jon boat welding as a beginner would you recommend a Mig spool gun or tig torch ? I know tig has a lot that goes into it with cup size and tungsten. Mig seems easier set up but I’m just unsure on what’s gonna be better and not burn holes in boats. I’ve got a practice junk boat I’m gonna use and order some aluminum practice kits !

You spoke clearly and at the perfect speed. Very well done.

You need a UVC light to deal with the mold and smell. Get yourself a 500 to 1000 watt metal halide or mercury vapor bulb (you may need a separate ballast/transformer). Break the outer glass globe without damaging the small interior quartz bulb. The outer glass bulb is just a UVC filter. Set it up so you can turn it on and off while outside the room. Turn the bulb on and the quartz bulb will produce huge amounts of UVC light, which kills everything, including mold, bacteria, and viruses. A plus is that the UVC light is so strong that it will also create Ozone 6 will sterilize anything that is in a shadow from the light. Leave it on for 30 minutes. DANGER - WHATEVER YOU DO. DO NOT EXPOSE YOURSELF TO THE UVC LIGHT. It will severely burn you and cause blindness. You can look at it through a glass window because glass filters out the UVC light.

Since someone previous used a variety of strange wire colors, this was the only video on the face of the earth that helped me - thank you!! 🎉🎉

would the redlight here be strong enough to allow me to walk out to my deer stand before shooting light?

I like my Bauer chainsaw also. It's great for the money. I wanted to buy a bigger one but I do get the job done. When tree branches fall down and cutting out some old bushes. Very handy to have. No gas or cord. And got mine on sale,89. Bucks for a battery and charger with a free tool. Nobody beats Harbor freight tools.

I'm surprised it cut that thicker steel, I thought for sure it was going to shut down. Not bad at all!

I don't cut much metal except for some metal roofing and I just turn an old blade backwards on my Bauer 6 1/2 circ saw so no need for that saw. But good deal for you.

I just noticed on my dump trailer when I press on the brakes the two yellows lights on the back light up but not the brake (red) lights. The turn signals work as they should. The only way the reds light up is when the lights for the truck are on. My wires are (in order) red, white, black, brown, blue and the middle is yellow

OR 6 colors - no black....?

You are the BEST for sharing this video in the way you did. Thank you so much! I just bought a trailer and was on a tight schedule to tow it to my next location and my FJ cruiser had a different adapter than the trailer.

Thanks for the advice using it

Is it true that for foreign vehicles the white wire is positive and American it is ground. If true would a foreign truck white wire be connecting to a ground American white wire?

Thank you for your explanation on hooking up the wires... My only question, and I might have missed this, are we looking at this diagram from the outside face or from the inside where the wires actually connect?