2 жыл бұрын
3 жыл бұрын
3 жыл бұрын
3 жыл бұрын
Пікірлер
@Seylle. Күн бұрын
This is a good general video on how to take apart a controller and put it back together pointing out all parts you might want to customize
@im.a.caveman 16 сағат бұрын
I appreciate the comment! Thanks for watching!
@Countdownsmiles 12 күн бұрын
Maybe i'm stupid, but i just want to clarify for myself; when you remap K1 to circle, you can still use the circle button right? You're just programming the k1 to perform the same input?
@im.a.caveman 16 сағат бұрын
No buttons should lose their function with the kit installed. Yeah, it's just programming to a K button and the original working as usual.
@hassan401_ 12 күн бұрын
is there any kit where only the face buttons are clicky?
@im.a.caveman 16 сағат бұрын
From extremerate I haven't seen one for ps4 controllers. They have them for the ps5 controllers.
@DarthLordRaven 13 күн бұрын
I would also install the extremerate thumbsticks they are better than the sony ones and changeable like you can do with the edge. What happens if you don't disable the adaptive triggers?
@Point224_edits 15 күн бұрын
Bro thank you for this tut I bought this kit for myself and I watched a different guy but I have a bmd 030 and he had a 010 and I was so mad then I realized I had a refurbished controller I got when I first got the ps5 and it was 010 and now I’m not sad 😂
@tnbsweat2334 18 күн бұрын
Why is my black strip too short ?
@riten2242 18 күн бұрын
hi what do you do if you don’t have power to the re map button?
@im.a.caveman 14 күн бұрын
Check if the cable was installed correctly or if the battery was reconnected
@CaymanReal 21 күн бұрын
for the people who wanna buy it y'all have to check the bdm of your controler before buying it this is maybe a reason that why some of y'all not getting it on
@XSamsaX 22 күн бұрын
The HyperX QuadCast (NOT S) does not work with or need NGenuity.
@kaosreality7154 25 күн бұрын
After sliding to the left try not to slide to the right and hop one time
@victorarreola6517 26 күн бұрын
can you remap 4 different button
@Calvin237dougal 29 күн бұрын
I've connected mine exactly how the video is, the battery came on before i connected the little motherboard. Now it won't come on. Even if i disconnect it from the small motherboard. What's gone wrong
@predator7028 23 күн бұрын
Have you fix it ?
@FakeJad Ай бұрын
Dude my red led light on the back won’t turn on what do I do what happen?
@FakeJad Ай бұрын
Dude my red led light on the back won’t turn on what do I do what happen?
@Obito-Uchiha492 Ай бұрын
Can you use this mod with the xtremerate button led kit at the same time ?
@Shaillz- Ай бұрын
Idk what it is but my left one doesn’t click anymore like it’s wore out but there’s no issues when I open and check
@juniormorales559 Ай бұрын
What glue do you use for the new TouchPad.
@thathondakid8256 Ай бұрын
How do I fix my triggers not working
@Pig_Man123 Ай бұрын
What screw driver do I need to
@CrispyDeluxe4 Ай бұрын
Thank you so much!!
@stevenromero2237 2 ай бұрын
Which gen is this controller
@im.a.caveman Ай бұрын
@@stevenromero2237 It's a BDM-010
@RandomStuff_11 2 ай бұрын
best guide for this
@im.a.caveman 2 ай бұрын
Thanks! Unfortunately it's for the older model. They now have up to BDM-050. I need to update my videos
@khalidjy7110 2 ай бұрын
Is there a mod for only L1 R1 ?
@im.a.caveman 2 ай бұрын
Unfortunately it's only combined with bumpers and triggers
@luisdavila5148 2 ай бұрын
El modelo de mi control es CFI-ZCT1W sabes si es compatible la carcasa ?
@im.a.caveman 2 ай бұрын
Tienes que conseguir el kit compatible con tu control. Puede abrir el control o consultar los detalles de extremerate para comprobar la compatibilidad.
@ItsTL708 2 ай бұрын
Hmmmm… I’m gonna bet it will drift in 5 months maybe?
@im.a.caveman 2 ай бұрын
Maybe, depends on usage but I'll just replace the sticks with Hall effects and I'm good to go without buying a new control 😃
@atiqakhan509 2 ай бұрын
Can u install me a kit as well😅
@HitManJavi02 2 ай бұрын
Does this work with the rise/rise 4 remapping kit?
@im.a.caveman Ай бұрын
@@HitManJavi02 It does. But you'll need to know which BDM you have since there's a new gen that recently released and there's some kits that aren't compatible since extremerate needs to update them.
@HitManJavi02 Ай бұрын
@@im.a.caveman 010 and 040
@im.a.caveman Ай бұрын
@@HitManJavi02 Either one will work. But keep in mind kits for 010 and 040 are different. When you're gonna shop look for the ones saying compatible with 010 or 040 depending on which one you're modding.
@sammiespear9628 2 ай бұрын
He’ll naw that’s too much mess around brake your controller
@Lex_i_ 2 ай бұрын
Is it possible to mod one controller with leds, clicky buttons and back plates? Would their be a best order to do them in? Great video thank you!
@im.a.caveman 2 ай бұрын
@@Lex_i_ Yup, all kits are compatible but please make sure to get the kits/shells that are compatible with your controller. You should do the face clicky first since the led is going to going on top of that one.
@endeavoer 2 ай бұрын
Amazing guide, thank-you very much
@dummy9417 2 ай бұрын
9:10 it dosnt fit on my controller what do i do
@dummy9417 2 ай бұрын
i figured out what was wrong but do i just need to replace it or get a whole new kit
@ToBrezzyy 2 ай бұрын
How much did all this cost I might get it all
@abrahamcakes 2 ай бұрын
Great video and guide ,very relaxing
@im.a.caveman Ай бұрын
Thanks for watching!
@benjaminstatham1081 2 ай бұрын
CAN THIS BE DONE ON A PS5 DUAL SENSE EDGE ?
@im.a.caveman 2 ай бұрын
@@benjaminstatham1081 Not yet. They said they're working on the kit but it's been some time since then and they've been silent about it so who knows when it'll release. They also said they working on a 4 back button kit for the DS Edge. We'll just have to wait for one of their announcements.
@AlessandroPaulin 3 ай бұрын
Is it possible to mount it on a scuf impact or infinity?
@im.a.caveman 2 ай бұрын
@@AlessandroPaulin You might if they use original ps4controllers. And if the kit is compatible with that ps4 controller model.
@NovaBoi7 3 ай бұрын
i just wanted to get whatever was under the buttons out so it wouldn't be mushy fuck doing allat
@MarkEskander 3 ай бұрын
Thank you , Awesome detailed video!
@im.a.caveman Ай бұрын
Thanks for watching!
@residentnotevil8888 3 ай бұрын
Too much tedious work
@Epivvoxil 3 ай бұрын
I’m glad he did it😂😅❤
@xiomaralugo9898 3 ай бұрын
I don’t have the l12 part 😢
@im.a.caveman 2 ай бұрын
@@xiomaralugo9898 It sounds like you have a newer model. Could be an BDM-030 or BDM-040
@JB_Voo 3 ай бұрын
I don’t think I need to ever remap touch pad or L3 R3
@im.a.caveman Ай бұрын
Then there is no need to do any soldering
@leonprez231 3 ай бұрын
Can you please respond to this message would be very much appreciated. This is about eXtremeRate Face Clicky Kit V2 for ps5 Controller BDM-010 & BDM-020, Custom Tactile Dpad Action Buttons for PS5 Controller. I wanted to order these too. However there are various negative reviews saying that the rubber under the mechanical buttons wear out within 3 to 5 months. So you have to open the controller back and and replace them. Do you have any idea of these issues? . Or heard about them change the system at all? As I really do want these ASAP. But I can't pay someone to replace the rubber for me every time they fail. Or can you recommend better ones for the ps5 dual sense controller Please? . Many thanks
@NaaahTako 3 ай бұрын
I just wanted to paint my controller 😢
@zBxder 3 ай бұрын
Unfortunately my controller is 030 I thought it was 020 so i bought this kit I just realized that’s the wrong kit
@Gabriel-l9r 3 ай бұрын
Thank you so much
@bplynch834 3 ай бұрын
Where did you get that special screwdriver? And all the tools that you used, including the tweezers that you got and also what about the colored controlled pieces?Where did you get those from
@RT-qz5ci 3 ай бұрын
Wow you deserve more subs
@Gonzalez91 3 ай бұрын
Im definitely gonna try this soon btw do u have videos on how to fix stick drift?
@im.a.caveman Ай бұрын
Unfortunately I don't as I don't have a good setup for being able to record while soldering new sticks/potentiometers. I recently replaced 2 sticks for the new gulikit electromagnetic sticks and the results are great so far! You're able to calibrate your drift with those.
@TheTone2244 4 ай бұрын
Does anyone know how long the blow dryer process is supposed to take?
@im.a.caveman 4 ай бұрын
@@TheTone2244 could be like a minute? Never timed it but maybe 1-2 mins. Depends how well you're providing heat to the touchpad and how much heat. Can't be too hot either. Just apply enough throughout the whole touchpad then try to lift it. If it's not lifting apply more heat until the board starts to lift up with ease. Take the board out with the glue so keep an eye on it
@r154l-thehunterofwisdom3 4 ай бұрын
i have bought your product and how to get warranty ?