ATTENTION PLEASE READ MY FAMILY IS IN KENTUCKY AND WE JUST SAW YOUR CYBERTRUCK AND LOOKED UP YOUR CHANNEL AND SUBED
@Jackyboy24867 сағат бұрын
ATTENTION PLEASE READ WE JUST PASSED YOU IN YOUR CYBERTRUCK IN KENTUCKY ON ROUT 75!!!
@thomasjacques52865 күн бұрын
I'm getting ready to have some PW2s mated to my Enphase PV system and my installer claims the Gateway 2 they have spec'd and the Gen 3 HPWC (I already have) will support future PowerSharing when Tesla enables other Tesla's to do the same. Is that correct? Or should I ask to have a Gateway 3V installed now?
@tylerxiao804215 күн бұрын
Tesla free install or they will charge extra?
@denisasamoah116 күн бұрын
Thanks this was very helpful i just got my cybertruck. I just odered a universal wall connector. Was i supposed to receive that for free ? Or is it just the installation I will get savings on ?
@drewksidetour20 күн бұрын
I’m guessing a 200A service disconnect is outside?
@thatkevinhaАй бұрын
So just a few comments. 1. The V2 Gateway and the 3-wire Gen 3 wall connector you mentioned are not compatible with PowerSharing unless you have the PowerWall system already installed and working. 2. For a stand-alone setup (no other Tesla power systems in the house), you will need a 3V (yes, 3V, not a typo) gateway with a "neutral balancing transformer" that the PowerWall system normally provides. 3. Additionally, you'll need the new (not available yet) 4-wire wall connector that can carry 12V power back to the 3V gateway when there's an outage (the current one is three-wire) This is my understanding. Yes, plus software that's not available yet.
@buixoteАй бұрын
The Ford system does not work, and neither Ford, nor Sunrun will support it. *Possibly* if you have Sunrun install it, but then you have to deal with them putting screws through your livingroom wall. The equipment costs $6k, my install was $7k, and Ford charges you $500, "for the privilige".
@LifeOnTechАй бұрын
Good information. I had no idea how the Ford system was set up and was wondering if it worked well
@ambesa1Ай бұрын
donating my blue screen flat tv after 6 years, its all good--these tvs are cheap now.
@gw3325Ай бұрын
Great content!! You are first!! WAY cheaper than a $14,000 Generac. Excellent job.
@aloissuter1071Ай бұрын
What size conduit do I need to rough in before I close up my drywall. I just confirmed my Foundation series two weeks ago. My confirmation reply was a delivery of no later than the end of September. Do you think that’s possible? Thanks for the info. We are hanging drywall at the present time
@FreeStyleCrhymeRАй бұрын
why d.beckham started to repair tv's all of a sudden?
@EVMANVSGASАй бұрын
Do you know what size and type the communication wire is, I'm seeing on a search I see 22 gauge shielded twisted pair but can't really confirm that. The red wire you spoke of. I'm running the wire this weekend and want to run the right wire with the power it even though I don't have the gateway yet to be ready for my next tesla with powershare. thanks
@ryancheesman400Ай бұрын
So they ran Romex inside of your conduits?
@billjohnson3344Ай бұрын
Yeah, that run to to the charger doesn't look up to code. Looks indeed like Romex NM cable (likely 6/2). If so - two violations there - can't run Romex in conduit, and need THHN #6 for the 60A rated circuit. Running the communication cable in that conduit with the power is ok, but the power is suspicious - unless that is some special cabling.
@graceshotdownАй бұрын
Is the gateway capable of taking a solar input as well?
@rjhoskinsАй бұрын
Dang I average about 115kwh/day at my house. Don't think the Powershare is going to work for me. Tesla credit it is. Thanks for the video and the nice explanation.
@bats151Ай бұрын
So if you have tesla solar and you purchase a foundation series your paying for equipment you already own ???? And FSD that isn’t available and you lose 7,500 rebate because the purchase price is over 80,000 LMAO WHAT???? Why would anyone do this even if you didn’t have tesla solar why??
@Wi2LowАй бұрын
Because one has the money and getting the CT now is worth the spend. Basic microeconomics says the utility bundle of the individual depends on their circumstances and preferences, and nobody else's feelings are relevant, at all.
@JAKEeSHOWАй бұрын
That was an amazing video!!!! Thanks for doing such a great job breaking down all the details!!!!
@amerb313Ай бұрын
How much was installation?
@ScottJones67Ай бұрын
I live in the ATL and got mine installed last week. I got a banner in the Tesla app showing how to use Powershare. The option to turn it on showed up at the same time in the controls menu and in the vehicle. My Powershare works.
@LifeOnTechАй бұрын
I'm jealous. When did you take delivery of the truck?
@ScottJones67Ай бұрын
@@LifeOnTech I took delivery Apr 27 in Duluth. My Powershare was probably available the day after install. But I didn't realize it until I poked thru the banner that appeared in the app.
@jacobpulickal438115 күн бұрын
did you have to call tesla to have the banner on your app, mine was installed a month ago and not showing up !!! Or the electrician activated it for you? my installer dont have a clue!!!
@ScottJones6715 күн бұрын
@@jacobpulickal4381 I did not call or do anything. It just showed up. Do you have powerwalls? I know that impacts things.
@evgeniy1332Ай бұрын
Thanks for the video What was the quote amount for installation? Sounds like about $2100?
@LifeOnTechАй бұрын
Yes, right around $2,300
@mseibert100Ай бұрын
Those truck look so bad
@womplestilskinАй бұрын
hey this guy paid over $100k so clearly he thinks it looks good and will be a pleasure to drive for years. If he thought it would be a complete failure or super ugly he would have kept his $
@Billie4404Ай бұрын
Those trucks look so awesome!
@user-tm2mt5ms5o23 күн бұрын
@womplestilskin Your opinion are just your opinion and not fact. Always remember that.
@1DVSMOFOАй бұрын
How about you say how much you actually paid for the install.
@LifeOnTechАй бұрын
$2,400
@bluedrewАй бұрын
Weird that you dont have it working now. Others in the forum have it going now. Maybe something hasn't updated right or a problem with commissioning. Also your 3V gateway and UWC are not required for thise with existing Powerwall and connector: For Customers with Powerwall If your home is equipped with Powerwall and home charging, you do not require any additional equipment. Powershare Home Backup functionality with Powerwall is expected to be available later this year through an over-the-air update. All AC Powerwall variants will be compatible with Powershare Home Backup in the future.
@imacmacnerdАй бұрын
Nice and Congrats! I live in Buford.. getting our PowerShare installed on the 20th!
@LifeOnTechАй бұрын
Awesome, let us know how it turns out.
@hendo3755Ай бұрын
W
@xmetal280Ай бұрын
Congrats on the new ride and very nice walkthrough of the PowerShare. I assume we'll see an update video someday when they actually turn on that feature. ☺ I'll need a ride next time you are around here!
@lilmemetv2 ай бұрын
i just seen you on piedmont !!
@amberkirkwood56212 ай бұрын
What material did you use to 3D these?
@LifeOnTechАй бұрын
I actually used regular PLA. It was suggested to use ABS, but the PLA seems to still be holding strong after 800 miles.
@gatecrasher19702 ай бұрын
£132 in uk for them backlights can buy 4k tv new for that
@brandon86673 ай бұрын
Is it true those don't have a paint coat and will just fucking rust
@LifeOnTech3 ай бұрын
They do not have paint, but they also do not rust. What people have seen is dirt that looks like rust, that sticks to the stainless steel. Easy to remove with windex.
@vyxl31862 күн бұрын
@@LifeOnTechtrust me don’t use windex
@Scarlettredd3 ай бұрын
Got a 50 inch Magnavox with blue screen I thought I could fix the problem going through settings and now I know the problem is the led lights
@bekind20473 ай бұрын
I need four - what is your price?
@LifeOnTech3 ай бұрын
I would check out @tsportline - they have a set ready to go: tsportline.com/collections/tesla-cybertruck-wheel-and-tire-accessories/products/tesla-cybertruck-factory-center-cap-set-and-wheel-lug-nut-cover-set
@bekind20473 ай бұрын
Amazing the times we are living in - just print it out - seriously!
@marsfisch443 ай бұрын
Did it just ship without?
@LifeOnTech3 ай бұрын
Yes, unfortunately
@ittailozano86133 ай бұрын
I saw one in person, it was shitty honestly
@tripzero0Ай бұрын
Best truck ever. Drive one. It's hard not to like it after driving it.
@vitopettito16893 ай бұрын
So nice of them to release the car before they even finished it
@Jrs19043 ай бұрын
Why not print one that could also cover the lugnuts? Just a thought
@LifeOnTech3 ай бұрын
I'll try one of those prints next. Not sure if it should just be flat or if it should have some sort of design.
@Jrs19043 ай бұрын
@LifeOnTech a design would be pretty cool. What about a silhouette of the cyberpunk itself?
@LifeOnTech3 ай бұрын
Good idea
@Jrs19043 ай бұрын
@LifeOnTech *Cybertruck. You know what I meant, lol
@teslatalk420693 ай бұрын
Which wrap is that?
@LifeOnTech3 ай бұрын
Inozetek Hyper Gloss Red
@ts440s4 ай бұрын
Next time, ask for permission they like to know they have control, and for them to grant you that request feeds their authority. Say something like I would like to have clearance to fly at 150ft and give precise direction 4.8miles SW of field at max altitude of 250ft are you able to grant me that access. Controllers hate when you tell them what you're going to do. Remember their called controllers.
@futureshock74255 ай бұрын
bring a dictionary of your favorite curse words, you'll be using every single one
@pedrzej8 ай бұрын
Do i have to replace all of the led strips? Or is there any chance that i can check which one is not working properly and repalce only these?
@arrowskicks37449 ай бұрын
I got a 60' Vizio TV at work that I'm going to take home. Blue screen also.
@notyourking38111 ай бұрын
Thanks bro, very helpful and easy to understand. Helped me get my bike home lol
@adeoliver Жыл бұрын
Thanks, I just picked one of these Sharp 4k 55's for free today, guess Ill be ordering some back lights.
@gene-allenmarshall244 Жыл бұрын
I’m about to start buying blue TVs, and fix them for $100 as is. 🤪
@gene-allenmarshall244 Жыл бұрын
Thanks dude! My father in law’s tv started doing this a year or 2 ago. So he swapped its room with the old 1080p. Samsung back in the living room again, and blue 4K Vizio in the bedroom.. I wondered.. has someone made this an easy fix? Do I even have to solder anything? Then you made it look easier than I was preparing for.
@leonardpruitt9444 Жыл бұрын
Thanks, I just replaced mine, and it looks great.
@xanos3001 Жыл бұрын
Thank you! I was able to complete this project as well using this video for a SONY that someone gave away kzbin.info/www/bejne/bXLLn3uKfb96mtU. I started at 12 PM and finished at 10 PM !!! These repairs are not for the faint of heart! Thank you for the ribbon tip!!