I can’t wait to order my 14” PY tomorrow . Does the gorilla clamp come with the kit when you order complete set? I do have a set of the bushing in my cart. Do I need to add the clamp also ?

You can handle my throttle cable anytime! ❤

Good info

How do you take off the nipple on it without damaging it last time did this I hit it with a hammer and it flew off but what’s a better way?

Could you tell me what size the holes were in the fender before you drilled them out and what size bed you used afterwards so I know how much to actually enlarge them? thanks great great video

This video is based 100% on your own personal opinion.

mine move like yours at 55 seconds, thats normal corect?

I'm not getting fatigue in my back I'm getting it in my wrists and hands

Buyer beware! These guys charge you for your complete bars as soon as order is received! Very dodgy business practice. Tried to cancel the order 2 days after I made the order, would have cost me $600 in restock fee! Honestly, I'm still waiting on my order over 3 weeks after I ordered. Setups like these can be had for less than HALF. Very disgruntled customer! I'm sure HCCC will delete this post.

Sorry that's nothing to do with abs

For those who don't know, bottom-to-bottom of a bar (or pipe) of the same diameter on a bench is the easy way to measure center-to-center.

I know that this video is a bit old. I have Heritage 114 and an Ultra Limited 114. I am considering going to higher (shoulder height) bars on my Ultra, for comfort on long rides. My biggest concern with going to higher bars is that the higher bars may make slow-speed maneuvering much more difficult. Both effective slow-speed maneuvering and long-ride comfort are important. Do you have any comments on how shoulder-high bars may adversely affect slow-speed handling of a heavy touring bike?

Thank you for this it was a big help

Hwy 36 Alton California to red bluff.

You really shouldn’t base it off your actual height, I’m 5’5, I have a friend who’s 5’8, when sitting I tend to sit higher given I have a longer upper body then he does, and my arm reach is also longer

I like 14 rolled back slightly. Keeps you sitting up straight

Thank you for straightforward and simple clear explanation 🤝

That is a real bonus tip on the brake bleed. I have used a syringe to pull out old fluid, but never thought to use it to push from the bleeder. Awesome!

Excellent video, thanks for sharing!

He forgot to back off a half turn or so before torquing down the jam nut on the oushrod adjusting screw.

HIS BALLZ CASUALLY FELL OUT, AFTER PULLIN OUT HIS THINGY😂😅14:40

good info

Im 6'3 and what length of handlebars would i be most comfortable?

18" 🔥

Which length of handlebars what I'm going to? I'm 6'3

Superior video! Only used to carb’s. Twin cam is reversed and I didn’t want to pull the whole air cleaner assembly off. Sick of flipping 1 page backwards one page forward one page backward in the service manual!? Hearing your click and being familiar mechanically. Job was a breeze! Just subscribed! I agree with most: Best throttle/idle adjustment video out here!

Thanks! This is the only video I found that shows a softail forks and handle bar comparison. I was on the fence between 1.25 or 1.50.

I’ll try and remember this the next time I already but new tires on my 2016 Ultra Limited. I have a friend who mounted the tires and balanced them and he found that one of the front wheel bearings was bad with only 12,000 miles I was shocked so I bought new bearings and he installed them. This bike has the anti skid brakes so special bearings are needed and one bearing is color code to go on the sensor side. Thanks for the great tip.

Is that a roadglide seat ?

genius

Great tech tip! Works great when the customer or other shops don't use red loc-tite on that lower shock bolt. Huge time save for sure!!!

Dear friend, please tell me how much oil should I add?

Seeing it wrong or did he just leave all that dirty brown old fluid in reservoir? This video is like taking advice from a dentist on how to brush properly that has false teeth.

Every industry standard is a gray area,wow

Thank you so very much!!! I live in the middle of nowhere and this helps so much. I was putting the nut on the wrong side 😂😂😂

I've been saying this for the last year! Apes with a back rest and floorboards is *the truth*. I strap my ruck to my 20" sissy bar which provides full back support and kick my 16" apes back towards me juuuust a touch. I used the exact same analogy, that it's like riding a couch down the highway. 13.5 hours straight like that one my Softail Slim, and 20 minutes from my destination I was still dancing around in my lane, singing to my music, not a care in the world.

I have recently bought a Heritage Softail, 2006 with stock bars. I have adjusted the bars a couple times but I am getting “tennis” elbow in the right arm. I have adjusted to where I have a slight bend in my elbow, but they do sit a little low. Just wondering what I can do to adjust. Appreciate any pointers.

horrible video

what am I watching ? why would you take off the gas tank to change your handle bars

terrible video

Thank you for making that easy to understand. I've just replaced my stator and reg. Went to test it and it fired right up. Pulled in the clutch and shifted into 1st. I felt the click of the shifter and watched the neutral light go off and let out on the clutch. After letting it all the way out the bike didn't move. It didn't even have a thought of moving. So I've done something wrong. I've watched a bunch of videos on this and I wished I would have found yours right out the gate. It's groundhog day daily here at my place. I troubleshoot, fail, wake up, try again and fail. You did a great job on your video but I was hoping you'd go into what symptoms would be if the viewer were to go wrong on any number of of pitfalls that we could experience along the way. Of course j have the luxury of hindsight so I'm not armchair quarterbacks you at all. I'm just wanting to ride and I can't. I'm close but that doesn't get me rolling out of the garage. If you would give me some suggestions to try that would great. There are too many questions I don't have answers to. Like are the clutch plates in the right sequence or did I get something out of order? Or was I led astray by the initial videos? They were saying to bottom out that male thread that goes into the shaft and then back it out 3,/4 of a turn and then tighten the nut? When you didn't mention that it got my attention. Maybe I shouldn't have backed it out once I bottomed out? Sorry for the long message. I just wamt to get out there on my bike. Please help. Thank you!!

They are nothing mire than tall Z Bars.not rwally Ape hangers at all. No thank b u il stay with Apss

Well I got an 05 electric glide and cannot remove the ignition like you said ,I’ve done everything except bust it with a hammer,,

TA.nto a las i no indikas la moto

Why my handle vibrates slots is it due to fish tail?

Per the factory manual

Hey, that was really helpful and I appreciate the suggestions. I ride a ‘18 TriGlide Anniversary Edition my arms are shrinking…..I am 77. I need to sit up straighter and it’s been suggested by others that a higher bar also makes it easier to “steer” a 3 wheeler? I made the transition from 2 wheels to three about 2 years ago. The first bar upgrade just isn’t long enough and I am reaching too far forward still. I want my arms to be bent some and not straight correct? I know all too well those neck and shoulder muscle aches! Thanks for your time, help and suggestions. Stay safe.

What size tire do you use on that 21 inch wheel

WOW, what a time and frustration saver!!

i have had the Avon air cushion with throttle assist on a week. I absolutely hate them. I do not like the space between the air cushion area. Infact i ordered the memory foam spike yesterday to replace them.