4 ай бұрын
11 ай бұрын
11 ай бұрын
Жыл бұрын
Пікірлер
@EricSmith-fe8xm 2 күн бұрын
Thank you
@JohnsJeepGarage 2 күн бұрын
We hope this helped. Thank you for watching our channel.
@JFromDreamville 2 күн бұрын
Is there no way to shut off the parking lights?
@JohnsJeepGarage 2 күн бұрын
If you go into your settings section, and if you DM me on X (Twitter) or Instagram, I could send you a picture. But if you go into your settings section on your display, you will find a list and you would need to click on lights, and you will see there is a daytime running lights option which you can turn off and other options.
@eggersd 4 күн бұрын
Well done. Straight to the point.
@JohnsJeepGarage 3 күн бұрын
Thank you for watching! 😎✌🏼
@keithtukes3634 6 күн бұрын
You explained and had the clearest and most lit video. Great information. Thank you.
@JohnsJeepGarage 6 күн бұрын
You are welcome, thank you for watching! I am glad it helped! 😎✌🏼
@jamesjay5119 6 күн бұрын
Thanks John. Looks simple compared to the new windshield washer pump I replaced this summer on my 2020 Willys Wrangler.
@JohnsJeepGarage 6 күн бұрын
Glad this video helped you with your Jeep! This was on the 2016 Jeep Wrangler JK.
@671JK 11 күн бұрын
Great video.. very informative.
@JohnsJeepGarage 11 күн бұрын
We hope it helped. Thank you for watching. We have one for the driver side as well.
@antho7475 11 күн бұрын
Came across this video looking for 2012 JGC 3.6 valve cover gaskets. Watched anyway great video
@JohnsJeepGarage 11 күн бұрын
Thank you for watching. We hope it helped you with your project.
@JeremyHenderson-z7v 12 күн бұрын
Thank you for making a legit video without any extra BS. This was easy to understand and follow. Thank you for your time.
@JohnsJeepGarage 11 күн бұрын
Glad it helped. Thank you for watching. 😎✌🏼
@MrJoshcc600 12 күн бұрын
Impossible to do with a winch. Take your winch off first or you'll hate itself
@JohnsJeepGarage 12 күн бұрын
I posted your comment for others to see. It depends on your winch, your aftermarket bumper, and the winch to bumper layout on how you installed it. There is easily enough room to remove it without having to go through the labor of removing a winch in many cases. Agree there are some the winch to bumper install installation ratio creates no room to remove the grille. This video focuses on removing the grille for there are many users who do not have aftermarket bumper or winch.
@andrewrondon5294 16 күн бұрын
Hey let me ask you something, so I replaced mines with led but the metal retainer clip that used to hold the old stock ones is bended, is there anyway I can take them out? Right now I’m surviving with just one bulb 😂
@JohnsJeepGarage 15 күн бұрын
I have actually never changed that out. I saw a few KZbin videos on it. I will open it up to see.
@meggabitz 17 күн бұрын
I know its a temp fix, how long does a few drops of oil last? I am ordering a new cardon distributor from RockAuto, just curious how long? i am in CT and the weather is getting crappier and I hate wrenching in the rain/snow/cold....etc. lol
@JohnsJeepGarage 17 күн бұрын
Sorry this ended up being your same issue. It is so much easier when it is just an idler pulley. 😃 If you use WD-40 for example, not long, 2 weeks. If you get the oil in there as described, do it a couple times, 2-3 months. The first time I did it I cannot tell you if I didn’t do it enough, but I’d said it lasted over a month. The second time I did it I took more time and applied it, and it lasted about three months. I would guess it’s based on the severity of your issue. if it means you can get enough in there to delay it for later that would be great. Thank you for watching.
@meggabitz 17 күн бұрын
@@JohnsJeepGarage oh wow thats much longer than I expected. thanks for the info! Yeah, last week I had a local jeep shop do the freeze plugs, $2200 later and now this! lol its typically one thing fixed one thing broken. thanks for the info, I just ordered a replacement distributor from RockAuto, its going in as soon as its nice out.
@JohnsJeepGarage 16 күн бұрын
Glad you were able to determine it was the same issue! Thanks for watching. You can find us on X or Instagram as well.
@meggabitz 16 күн бұрын
@@JohnsJeepGarage bummer its not the distributor, its either the idler pulley or the fan clutch. it started to go away when it warmed up, but i also put a few drops of oil on the idler pulley. So now I can't tell which one it is, but I put a screwdrivers on the idler pulley bracket and I felt some feedback with the noise. I ordered a new distributor and will just install that later. The shaft on mine was rusty so I thought it was definitely that. Sadly its not. I'll keep chasing it down.
@JohnsJeepGarage 16 күн бұрын
That’s why I was asking if you were sure it was the distributor because the way I could detect it was I pulled the belt off so none of the accessory pulleys were running and I let it run just for 60 seconds to see if the squeak was still there. And since it was, then I knew it was the distributor. Is there no way you can get your money back? Since you have to take the belt off, the idler pulley’s are not that expensive. But I bought myself a mechanics stethoscope from Harbor freight. It has a long thin receptor Rod. Just be careful since the car is running. I’ve seen it where the alternator is the culprit as well as the idler pulley which are more common.
@egbeta 17 күн бұрын
Nice job on this. Very easy to follow.
@JohnsJeepGarage 17 күн бұрын
You are welcome, thank you for watching our channel.
@darrent8863 19 күн бұрын
I have thought about doing this, thanks for posting! I thought I was the only one that had dented that area... LOL
@JohnsJeepGarage 19 күн бұрын
There are many of us that have the dreaded "Jeep Dimple"! Thank you for watching.
@solarmaple 24 күн бұрын
Thank you for the video!!!
@JohnsJeepGarage 24 күн бұрын
You are welcome, thank you for watching! 😎✌🏼
@liamtgoldenlg 24 күн бұрын
Wow that's new lmao thank you!!
@JohnsJeepGarage 24 күн бұрын
Thank you for watching.
@nickc6332 26 күн бұрын
Extremely awesome video in such a short time frame. The roll pin repair on the pipe is very valuable. Can you tell me what epoxy you used?
@JohnsJeepGarage 26 күн бұрын
Thank you for your feedback and thank you for watching. I use JB weld quick weld. It is a quick setting steel reinforced epoxy with a 3127 psi strength set time is six minutes and it cures in 4 to 6 hours and it cures the color of dark gray. At the 41 second mark, we show a picture of the epoxy used. Again, thank you for watching.
@heatherhigbee5144 Ай бұрын
Thanks! I told my husband that I’d take care of the hoses and then realized that I had never put one of these on 😅
@JohnsJeepGarage Ай бұрын
I am glad this video helped you! 😎✌🏼Thank you for watching. We have a lot of Jeep videos too. 😃
@kinglasher84 Ай бұрын
Looks like someone had already replaced that gasket kit. The OEM seals are all black.
@JohnsJeepGarage Ай бұрын
Yes. Looks like the ones I replaced in the video were Fel-pro gaskets. Thank you for watching.
@AntonioGlessner Ай бұрын
Great video. I just ordered the part. BTW my TJ tailgate has two little holes on each side just below where this rubber covers. In your video it looks like you have some type of rubber over these areas. Do you know what part number that would be? By the way I love your artwork with the black lab. Where did you get that done? My lab is white and I would love to throw that on a t-shirt
@JohnsJeepGarage Ай бұрын
I looked but I can't find a item code for this. I need to ask my friend at a local shop. Follow me on X or Instagram and you can direct message me. Also - on Instagram, there is a person Nick Shirokov (n.shirokov). He does car artwork. I sent him pics and he designed my logo. The dog is actually a Charcoal Weimaraner which looks like a lab. He is riding in the 1998 Jeep Wrangler TJ my daughter and I rebuilt. Thank you for watching.
@travismaulden7170 Ай бұрын
Are there conditions where the parking brake will turn itself back on? My wife’s BS died in traffic, we were able to pull the manual neutral cord for the transmission and get the parking brake off with the engine off, but when we tried to push it, the parking brake would set itself again. Driver’s door was closed. Crazy that Ford doesn’t have this info in the owners manual.
@JohnsJeepGarage Ай бұрын
I don't know the answer to that question but posted it for public comment if anyone else knows. I am also looking it up to see when and where this may happen. Thank you for watching.
@michaelmoore6398 Ай бұрын
Thanks bro
@JohnsJeepGarage Ай бұрын
You are welcome, thanks for watching! 😎✌🏼
@jepsterjepster4006 Ай бұрын
Thank you, was pulling my hair out!
@JohnsJeepGarage Ай бұрын
I am glad it helped! Thank you for watching.
@chagosoutdoors3122 Ай бұрын
Thanks for the video.
@JohnsJeepGarage Ай бұрын
You are welcome, thank you for watching! 😎✌🏼
@docfromwyoming2449 Ай бұрын
Good info John but mine rolls up😁👍🏻
@JohnsJeepGarage Ай бұрын
Ha ha! That is funny! I have one like that too. Thank you for watching. 😎✌🏼
@jimcain5010 Ай бұрын
Great video I need both sides done and it is such a small drip but can smell it in exhaust. don't seem to lose much between oil changes. I think I am going to send it to a garage I would be running for tools and want piece of mind. Thanks again great video.
@JohnsJeepGarage Ай бұрын
You are welcome. I appreciate you watching. We also have a video on the Driver side too. The Passenger side is a "bear".
@brandontaylor1551 Ай бұрын
Love your videos! Great editing, love seeing the whole trails, keep it up! Best videos ive seen and ive watched alot!
@JohnsJeepGarage Ай бұрын
Thank you for the kind words! I'm glad you liked it. 😎✌🏼
@Paintbl99 Ай бұрын
Thank you!!! Mine kept sliding off but I realized from your video that you have to hold the rear clips in place while putting the upper clip on
@JohnsJeepGarage Ай бұрын
I am glad it helped. Thank you for watching our channel. 😎✌🏼
@chagosoutdoors3122 Ай бұрын
Wow. Your magic.
@JohnsJeepGarage Ай бұрын
😂 Ha ha! Thank you for watching.
@kurtmeister8308 Ай бұрын
Excellent video . Thank you for sharing
@JohnsJeepGarage Ай бұрын
You are welcome! Thank you for watching!
@JeanneCaprioli-George Ай бұрын
Thank you John. I couldn't find the hood latch to save my life. You're my new best friend, lol
@JohnsJeepGarage Ай бұрын
Ha Ha! You are welcome, thanks for watching! I am glad I could help you find it. The reason I made the video was a friend asked me to look at something on his Jeep and I spent 30 minutes looking for the hood latch release. That is when I knew I had to share this. Take care!
@scottmurphy1890 Ай бұрын
Hey thank you so much for this video. I just knocked this out in a few hours because of this great video. Really saved me some serious coin going to a mechanic
@JohnsJeepGarage Ай бұрын
I am glad it helped! 😎✌🏼 Thank you for watching our channel.
@aaronclarkson3469 Ай бұрын
Good video thank you for explaining where the clips go back in with the tubing helps to remind me where they go back into. Great video!
@JohnsJeepGarage Ай бұрын
You are welcome, thanks for watching! Happy it helped.
@michaelkusjanovic9954 Ай бұрын
Great tutorial! Thanks for posting.
@JohnsJeepGarage Ай бұрын
Glad it helped. Thanks for watching!
@Papasoczka Ай бұрын
excellent video! Changed out both rear sensors (2014 JKS) in about 20 min's... Thanks for posting, very helpful!!
@JohnsJeepGarage Ай бұрын
You're welcome! 😎✌🏼 I am glad it helped. Thank you for watching.
@earlliotti5316 Ай бұрын
Approaching the tensioner from under the jeep was a game changer for me; great idea! Thank you 😃
@JohnsJeepGarage Ай бұрын
I have big arms, no way over the top was easy for me. I realize many do it over the top. Thank you for watching! I am glad it helped. 😎✌🏼
@rlm033 2 ай бұрын
THANK YOU THANK YOU THANK YOU GOD BLESS YOU!
@JohnsJeepGarage 2 ай бұрын
You are so welcome, thank you for watching! 😎✌🏼
@4000jetta 2 ай бұрын
After replacing the sensor and going on a test drive my abs light came on again. Do I have to clear the light with a scan tool also?
@JohnsJeepGarage 2 ай бұрын
A couple questions? A normal scan tool will not work unless it has the ABS reader. Normally, the light will go away but the code will remain in the system unless you delete it with the ABS scan tool. How did you know which side to replace? I only ask in case there was another issue as well. A normal OBD2 will not clear it.
@JohnsJeepGarage 2 ай бұрын
Did the scan tool pick up any other issue?
@4000jetta 2 ай бұрын
I took it to a local repair shop and they told me it was the front right wheel speed sensor. I replaced it and drove a mile or two and the light came on again.
@4000jetta 2 ай бұрын
I just ordered a Innova 5610 scanner from Amazon for $241. I will sort this out once I get it. I just wanted to know if the abs light was supposed to stay off once the sensor is replaced.
@JohnsJeepGarage 2 ай бұрын
Normally it has gone off for me. But I also erase it with my ABS Scanner. So I never really have the opportunity to see if it would come back on by itself. It may just be the code is still in the system. But if it is driving normal, I would say you fixed it. I enjoy my scanner with ABS as well (Autel) because it has helped me tremendously. Thank you for watching.
@jamesmyers9442 2 ай бұрын
Thanks man 1 of my 2 keys decided to crack and split in half luckily I got 2 new keys before it stopped working completely Got 2 keys from Amazon for $20 and got a local locksmith to cut both of them $20 total so I got $40 in 2 brand new keys
@JohnsJeepGarage 2 ай бұрын
That is awesome! 😎 ✌🏼 Thank you for watching!
@TheDave048 2 ай бұрын
Fantastic ! I followed this process but one word of caution, if you use the topsider, the seals will swell after use if you don't clean them. I ended up spraying them down with brake clean and that did the trick. Thank you so much for such a great process video. Much appreciated.
@JohnsJeepGarage 2 ай бұрын
Great tip! Thank you for watching. I am glad the video helped.
@carlcvplow2432 2 ай бұрын
Absolutely love this 4 part series! I have watched each one several times. Outstanding presentation. ! will be there 7-10 you have definitely given me and others a leg up on what to expect on these trails. Can't say enough good about how thorough you were. Fine work John.
@JohnsJeepGarage 2 ай бұрын
I am glad you liked it. Thank you for watching. If you haven't been there, the Park store will share the latest conditions. Enjoy!
@johnobody 2 ай бұрын
Thanks for the information and videos 👍
@JohnsJeepGarage 2 ай бұрын
You bet! Thank u for watching!
@Hephaestusthejeep 2 ай бұрын
I have an 09 with the 3.8l also. Ive found 5w40 to run great in mine. Im currently using shell rotella t6 5w40 heavy duty diesel oil and lubegard biotech. I used to run 5w30 but 5w40 seems to handle the heat better and not burn off.
@JohnsJeepGarage 2 ай бұрын
I posted your comment but where do you live, because in the southern states I have not tried going up in weight. I like 5W-20. Thanks for watching!
@Hephaestusthejeep 2 ай бұрын
@@JohnsJeepGarage Louisiana. I also ran full synthetic 10w30 when we had the great freeze of 2021 and the shorter one back in January of this year. These 3.8l were engineered for 10w30 originally. Apparently they never changed anything to make it spec 5w20 and just backspeced it for CAFE reasons.
@JohnsJeepGarage 2 ай бұрын
I posted your comment. Thank you for watching.
@2centsuncensored672 2 ай бұрын
What's the size bulb to purchase at auto store?
@JohnsJeepGarage 2 ай бұрын
If you’re using regular bulbs or incandescent bulbs, then they should be 3157, but if you have LED then there are some variations. Maybe this chart can help you also if you put in your vehicle information. Then scroll down. sealight-led.com/automotive-bulb-finder/jeep/gladiator Thank you for watching
@hull5768 2 ай бұрын
Nice idea on using the black cap on the battery terminal. Will have to remember that. I'd like to know why Jeep mounts the alternator backwards like that? Thanks
@JohnsJeepGarage 2 ай бұрын
Thanks for watching. I am glad that tip was helpful. On the alternator, it is about alignment with other engine accessory pulleys for the serpentine belt. So it’s more about where it fits in the engine bay with that particular engine. As an example, look at the TJ , more access on the 4.0 L and able to have the alternator set back with belt in front. The same on a Jeep Wrangler JK 3.8 L, room in the engine bay to have the alternator back and pulley facing forward to align the accessories and belt. The new design 3.6 L versions on the same Jeep JK body, reverses the position of the alternator for easier alignment. The same with different model cars. I realize the design engineering teams create other problems too for jobs that were simple like changing spark plugs. I like the older styles easier access.
@hull5768 2 ай бұрын
@@JohnsJeepGarage thanks!
@MisterCybernaut 2 ай бұрын
The only video on the door pin topic. Sinple and easy to understand help. Thank you!
@JohnsJeepGarage 2 ай бұрын
Glad it helped! Thank you for watching! 😎✌🏼
@mikethomas7138 3 ай бұрын
thanks was just looking under mine for the first time there, and that gas tank is way in the way, you made it look easy to work around it... i'll be working on this next weekend....
@JohnsJeepGarage 2 ай бұрын
Since it is not lifted, I want you to try something, if you try this, you will see as just a test the difference in your access. Put a floor jack under the rear bumper and start jacking it up. You will realize that you are not jacking up the frame or the vehicle, but you are raising the rear end which itself will give you more of a clearance with the gas tank. Thank you for watching.
@mikethomas7138 2 ай бұрын
@@JohnsJeepGarage thanks, I was looking at that very thing...and then put the jack stands under the bumper. It looks like I'll get an inch or so better room in there. thanks for that tip
@JohnsJeepGarage 2 ай бұрын
Awesome - glad it helped. Thank you for watching.
@brackeng1294 3 ай бұрын
Do you have any before and after measurements? Interested to hear a long term review on this lift
@JohnsJeepGarage 2 ай бұрын
It is not a lift kit, it is a leveling kit for the front which removes the rake a true 1.5”. So the front levels out 1.5”higher. Thanks for watching.
@QSasquatch 3 ай бұрын
My screws won't turn & I don't want to break anything.
@JohnsJeepGarage 2 ай бұрын
Sounds like somebody over torqued it, I would try a little WD-40 or PB blaster. The screws remain in a new housing in the housing doesn’t cost that much. I would say that your issue could be stripping the head of the screw so make sure you have a good fit and standard pressure while unscrewing.
@QSasquatch 2 ай бұрын
@@JohnsJeepGarage done & soak overnight
@JohnsJeepGarage 2 ай бұрын
Perfect. Thank you for watching.
@donngrimes6179 3 ай бұрын
Well done!! Thank you.
@JohnsJeepGarage 3 ай бұрын
Thank you for watching our channel. I’m glad that it helped you. 😎✌🏼
@SixDollarFamily 3 ай бұрын
Hey John! Thanks so much for your videos. You've walked me through several things at this point. Don't suppose you could do one for the Hvac door actuator that is behind/under the steering column could you? 😊
@JohnsJeepGarage 3 ай бұрын
Great suggestion! I appreciate hearing what people are interested in so I can capture that in the future. Thank you for watching our channel.