Hello, Can an NTFS formatted USB hard drive be mounted on a LXC container?

Mr yabber mouth

Hello, Great, informative video. I have an old APC-1000 with a DB9 port, do you think is possible to retrieve data from it, using the serial port and I guess a FTDI adaptor to usb? Thanks.

Newbie question: I just went through your list about LXC on ProxMox, and the video about adapting the user-files for file sharing made me scratch my head a little. I didn't setup anything yet but in this video I observed a user section in Portainer. Maybe it does the heavy lifting and automates what you explained in the other video and I don't need to study the other video? 😝

What about adding a tape device ?

This prototype board would seemingly work well with a pc power supply. Regulated 5v that would be safe for the io header.

Very good tut, thanks!

I still dont get it, wouldnt be easier to run a linnux VM with all your containers ?

I bet you could get it working if you just looked up supported NICs list they have on their website instead of first buying then hoping. Every appliance vendor, especially open source one, focuses on the limited MOST used hardware and they don't have time to support lesser used hardware. SO always look supported hardware list before going into the store to purchase your proffered product.

ipv6 is what causes that blank console apparently. instead of DHCP, selecting slac usually fixes it.

Fantastic video! This answered many questions I had, and with no messing around or silly coffee jokes. Thank you!

Добрый день. Как настроить мониторинг свободного пространства диска? А температуру процессора?

why the heck need to communicate HA directly with the robot. I dont want this robot to be part of my network. I have all devices with smarthome in a DMZ network, not able to scann all my other private stuff and controlling it via Cloud services is very easy... but any how all HA stuff needs direct connections with that devices which sucks

I have been trying to get this to work for ages, so quick and easy with your video, thanks!

Thank you so much, great help

Can you use a single NIC w/VLANS like pfSense supports?

I really like this mixer but as much it being simple like I want it to be I have something else in mind I’d like to pass on to what I would like to look into and need your help if you’d like to that is.one is having 4 mono inputs on the left all tied to the left output and 4 mono inputs on the right all tied to the right output. Or just a 8 channel stereo mixer with two outputs.Another is the same 8 channnel stereo mixer with pan pots also. Can you help?

Thanks you so much for the great work. I've been wanting to set up my home lab for a few months now to facilitate with my project to share my tech knowledge with others, like you and other KZbinrs for free. This video was part of the missing key for hosting my services from my home network.

Well presented, thanks for sharing your intelligence! If you want to make a long video, then please do it for PodMan.

Great video I went from proxmox -> Ubuntu VM -> Docker to Proxmox -> Docker This was to make it easy for multiple docker containers to use the hardware GPU. t works really well... as you said , Proxmox is just Debian, so nothing _technically_ wrong with doing it. It still feels does feel a little wrong though! Maybe next time I'll use Proxmox -> LXC Ununtu -> Docker

thank s for this Video. Can you also help with IPFIRE Captive Portal? How to setup, features, settings etc.

Thank you! Thank you! Thank you! This is how I understand the instructions, everything is clear and easy. I carried out all the work steps on Prommax 8.0.3 😀😀😀😀😁

One of the best videos I've seen on this subject. Well done. Thanks for creating it.

I run my docker containers inside a proxmox container.. One big advantage here is that I can migrate this container to another machine and all my containers move as well. If you run docker in a VM, you get even more migration power because you can live migrate all the docker containers without downtime (but you do need the overhead of a VM)

THANK YOU!!! Lots of pages and noise about this, but this is the clearest and most straightforward. Working like a charm :)

Nice. Really helps my setup. What sensor did you use for connected status ? Greetings from Belgium ( I used to use IOTLINK )

I have the exact same connection with the QinHeng Electronics CH340 device connected. However, when I run the esptool command, it fails to retrieve any information. The device is actually an Ender Pro 3 printer. I have Debian loaded in an LXC, and followed the instructions you've shown. But the device doesn't report anything In the PVE console, esptool will at least scan the port, but reports nothing. I'm trying to pass through to Octoprint. So if I can't pass through the usb device, makes the LXC useless at this point. Is making this inside a fully fledged VM the better route? PVE 8.0.3, and the LXC is Debian 12, both systems up-to-date (11/17/2023)

I wish pi-hole would support DHCP for multiple subnets (vlans). I've read there's a way to do it with a DNSmasq script but I don't have those skills.

Do you know how can i add xiaomi 2k camera (magnetic mount) to home assistant?

Thank you for your video. It is very helpful. I do have a question. I did use a D1 Mini ESP32 board and it worked perfect as a BT proxy. Here is my question., I tried to add a humidity sensor to the board but it does not allow me to do it. When I tried to install it and add the new part of the code I get an error. Have you tried adding a sensor to the bt proxy code or have any comments ???

Thank you sir !

I do not know if it have been mentioned, but you need to switch the bios to OVMF(UEFI) otherwise it will not boot.

Excellent guide, got me up and running on an lxc container quick now I can play with some prebuilt containers =)

Thank you so much for this!!!! I was about to pack it in and it finally all came together watching YOUR video again. Cheers LadyD

Came here from Andreas Spiess's video 443. Worked like a charm first time, thanks. (Used scp to ssh the HA iso in terminal on MacOS). Subscribed.

Already subscribed, so I gave you a thumbs up! This proceedure worked great, thanks for taking the time to share you knowledge. I also thank you for the github where you put the commands! Now I have a docker running Trilium (note taking software) and you made it easy!

THANKS , finally my raspberry pi now can load containers in few seconds. I got to the point where it took 20 minutes to load the images from the sd, each time I had to sit and wait ages for it to load. GOD BLESS YOUR SOUL

I did same installation like you in virtual VMware machine but I can't access in the browser the address why please

Great video - I missed the part where you opted to use dhcp, where is that set and second question how could I make the vm have a static ip address

It has a chip and firmware, can’t we add a little os to it? 😅🤣

So awesome!!! The new interface looks different from yours..but by golly it's working I had to do an apt purge netdata* to remove an old instance of netdata I had installed! The script went thru and set it all up! Works like a champ! Shared on my FB page...gonna try to post this on reddit too!!!

Please keep doing such grate crash courses

If docker and portainer should not be installed directly in the proxmox stack, how should it be installed then ? Because you are not the first youtuber I heard saying that but you do not provide the informations about the correct way to do it. It is better to virtualize a linux distro (debian 12 for me) with proxmox, then install docker and portainer inside this VM ?

Seems a little bit too much work in HA setup with multiple host to create PAM users on all hosts!

Just wanted to give everyone a heads up on keeping the hard drive mount point persistent to your LXC container(s) when you reboot your proxmox node. You need to add the mount point to the proxmox node's fstab file in /etc/fstab. By doing this it will auto-mount after a full proxmox reboot. You need to use the UUID as in the video just in case the drive letter changes. An example of this would be (/dev/disk/by-uuid/8765-4321 /media/usb-drive vfat defaults 0 0). To see the UUID path you need to use the command ( ls -l /dev/disk/by-uuid/*)You substitute your UUID path, the folder you have it mounted to within your node, and the filesystem used on the hard drive. You do still need to enter the mount point in the containers config just like the video shows. I had external hard drives with data already on them so I couldn't just use the GUI to format them to ZFS and mount them that way. I had mounted multiple external hard drives using this video and it worked fine until I rebooted the proxmox node. They were all gone and all my drive letters changed.

Does it support to raspberry pi 4B ?

you can do keyctl and nesting just by clicking on the ct (100) -> options -> double click on features.

I am unable to access the BIOS. Attached is a screenshot for your reference. After taking the screenshot as shown, there is no further action or response from the system. Same happens while "Esc" on the boot screen. imageupload DOT io SLASH f2sa7zC23kREo1S Thank you in advance!

hi. Squid proxy server does not want to start after reboot. please advise

I don't know what to do. I tried to mount the HDD and ok, it worked. I add the HDD to LXC but always i have "Permission denied" with ls -la and i tried to change the owner but it's impossible to grant the access. So, somebody know how i can fix it?