I bought those mini figures from China thru Shopee, they're affordable 100 pcs of 13mm or 1/144 scale figures for $3 per set. here's the link: shopee.ph/ALMA-100pcs-Kids-Toys-Model-Building-Passengers-1-100-1-150-1-75-1-50-Scale-Train-Scenery-People-Figures-Dollhouse-Decorations-Mixed-Color-Pose-ABS-Material-Hot-DIY-Character-i.460958943.17824786302

Thanks, turns out this ship is easy to detail with just black panel linings and flat top coat and it looked good, I actually have a spare one of this ship that I'm planning to paint in a star wars color scheme and I'll vlog about it next time. Thanks for watching.

The majority of the metal parts are made of machined aluminum except the gears, cvd and the central driveshaft I think were made of reinforced steel, also the metal gearbox I think is made of diecast pot metal. Thanks for watching.

Thanks, i know years ago i ordered some metal turn buckles for a wl959 and they were heavy metal...Anyway your car looks great..i have a v8 brushless version of this car on the way..its currently the fastest 12th scale buggy on 2s out there..thanks for sharing

Thanks! I just drilled a simple hole at the back and now it can tow trailers. I wish I could do more modifications on it, that'll be awesome.

Thanks man, the shock guards is just a plastic bottle cap that I sliced crosswise to divide into four pieces, then I drilled a hole to fit the shock screws and there you have it. It's a free easy upgrade actually, you can use a plastic bottle cap from a 1.5 - 2 liter coke plastic bottle or any plastic bottle cap that you can find that would fit. Thanks for watching.

@@Rock-On-Ron You’re a genius! Thanks man! 😎

Alright

Yes indeed, actually I also have the HG MLRS GP02A and the HG GP Rase Two Ten GP02A, which I'm planning to review in my future videos. I hope once the RG version of the GP02A is released, it'll be a solid kit and I hope it will also have ratchet joints to handle the weight of the heavy weapons with the shoulder boosters. Also I think instead of attaching the boosters on the shoulders I hope they renovate a new attachment of the boosters to the back pack instead. That'll be awesome.

While the RG RX-78 2.0 looks amazing and GP01 has been great, GP01Fb shown RG tech isnt quite ready for chockers like GP02. I also prefer HG because the build potential is much higher (I barely get my GP01 off the ground so to speak)

I got the aircraft carrier as gift from a friend in Japan, I don't have the box and all it says at the bottom of the ship is that it's made in japan. There are similar models of this ship under two brands, namely "Motormax" and "Redbox" which were released way back 1998. I guess and think it's most likely that the brand of this ship is Redbox. Thanks for watching.

Ukuran roda y berapa??

Good question and yes I also have the same issue, though mine is not too loose. I mean the metal gearbox that I had is loose but it is just minimal that it didn't really affect the drivetrain or the car while it's running. Also what I found out when I first bought the 2 sets of metal gearbox was that the one pair is loose and the other one is tight, so what I did was I swapped the upper and lower part of the two pairs of gearbox to equally distribute its looseness which resulted the front and back gearbox to have minimal looseness. Also I used a thick automotive gear grease on the diffs bearings and inside the metal gearbox and it also minimized the looseness. With that being said, In my theory I think these metal gearbox parts is not consistent in quality, you may get it loose or just a bit loose. Also I think the production process of these metal gearbox is not machined meaning it's manual similar to the manual casting production of pots and pans, that's why it's not consistent in quality. So once again my tip is you may swap the upper and lower part of the 2 metal gearbox, use a thick automotive grease and you may sand off some surface of the metal gearbox to make it tight or at least minimized the looseness, that's what I did on mine and so far no issues with it. Good luck on your build,

Those mini diecast cars are a mix of different brands namely: Tomica, Kyosho, Navi Dydo, Hotwheels, Matchbox, and Micro machines. their scale ranges from 1/100 to 1/144. I bought most of them shipped from Japan.

Thanks man, I 'm glad you liked it. Yes I'd like to make more diy projects for gunplas, more power to the hobby. 👍

@@Rock-On-Ron, spot on!

No problem, here's the links my friend. these items are from aliexpress. Bumper - www.aliexpress.us/item/3256805615627137.html?spm=a2g0o.productlist.main. Lights - www.aliexpress.us/item/3256805795625034.html?spm=a2g0o.productlist.main. Wheels - www.aliexpress.us/item/3256805687231939.html?spm=a2g0o.productlist.main.

Dear Sir, you are the man! 🫡 Lol

@@Ohh_Is_That_Sooo... yes sir you the man 😄

I'm still using the same stock shocks but I changed the springs, the springs I used are for 1/10 rc truck. here's the product link from Aliexpress www.aliexpress.us/item/3256806244048105.html?spm=a2g0o.productlist.similar_items. Thanks for watching

@Rock-On-Ron brilliant thank you for getting back to me :)

Alright alright 👍

Their scale size is 1/400 and they're made of soft rubber or vinyl.

Yes indeed it's an awesome ship, I don't usually rotate the wings and mine is still tight though, copy that thanks for the tip. 👍

Awesome, goodluck selling yours or you can hold on to it and see the value further increase. it's all good 😄👍

You mean the intro song? honestly I don't know either, but I do have a friend that knows the artist personally and they sent me the mp3 file and they allowed me to use it.

I see. Well actually these sets are meant to be played with, it's just that the mini figures can get easily lost if not well kept and I lost some too. The ship figure itself is durable and made to last.

Hmmm I think I'll pick..

Yeah man I guess it's Ben 10 hero time, my omnitrix is a custom G-shock GW9400 Rangeman. 👽

It's custom-made cnc machined aluminum given by a friend. It's not available for sale anywhere but you can achieve the same look by simply spray painting your plastic side guards with silver metallic spray paint. :)

@Azraelthanatos Yes actually I have that kit, to be specific it's the 1/144 "Ms Figure 01" from the builders parts hd. The crew set is colored light grey and needs painting, I'll plan to vlog about it in my future vids. :)

nah, i thougt that were gp02 by solomont (3rd company) at first.

@@quanganhnguyen6349 Yep this is just the hg gp02, but this hg is a solid build too. Also I've heard the solomon hg has some issues as well being third party, I'm interested to see how bandai will remake the mg 2.0 of gp02 maybe ver ka. or better yet a PG gp02

@@quanganhnguyen6349 also check out the review of the solomon gp02 from this channel kzbin.info/www/bejne/aoDIfWt7rrB1sK8si=Jf0C8r5z8jpKYy5D you'll see the solomon gpo2 has frame issues being loose and the plastics seems brittle, looks good aesthetically but not as a whole kit.

@michagamza Tak, łożyska są trochę luźne po zamontowaniu na metalowych piastach typu C. Zestaw metalowych ulepszeń, który kupiłem, zawiera łożyska tego samego rozmiaru co standardowe, i umieściłem 2 łożyska na piastę, aby zapewnić szczelność. lub jeśli znajdziesz przekładkę tego samego rozmiaru co łożyska, możesz ich użyć, przyjacielu. Jeśli nadal jest luźny, możesz spróbować użyć kleju Loctite do umieszczenia łożyska w piaście, ale uważaj, aby nie umieścić kleju wewnątrz mechanizmu łożyska. Dziękuję za obejrzenie mojego przyjaciela.

@@Rock-On-Ron dzięki właśnie dałem za dużo kleju właśnie i teraz muszę wszystko wyczyścić w acetonie chyba to puści klejem do opon to kleiłem 🫠👨‍🔧🤦🏻‍♂️

Thanks for watching 👍

@ucitymetalhead Thanks man, yep actually that's a bronze sharpie pen but gold will look awesome too. Just in case if you're going to paint yours too with a gold sharpie pen, I suggest you finish it off wit a clear topcoat just found out the sharpie pen can easily be removed with a scratch. Those weapons are just from a cheap plastic toy for 3.75 figures and is quite hard to find and I liked how it fits the tank.

@@Rock-On-Ron yeah I didn't have any luck finding it on aliexpress or Banggood unfortunately cause it makes a way better weapon than the thing I took from a marvel legends figure. Yeah I seen that problem with the paint too especially when you crash as much as I do.

@@Rock-On-Ron i think I put up a short video of the stuff I did to mine if you want to see.

@@ucitymetalhead yep I've seen yours, nice custom, kinda rough but it works. awesome

@@Rock-On-Ron yeah it's definitely a prototype that i kinda had to problem solve on.

@jjami14 The GT1 Toyota dealer music is one of my favorites, GT1 is awesome. Thanks so much for watching mate! :)

I see what you mean, from the time stamp 0:11 to 0:15 and 5:55 to 6:05, I was indeed able to install the silver metal shock tower to the metal gear box, and the screw that I used are the ones that came with the metal upgrade set are compatible, the screw sizes and screw holes diameters on the metal upgrades and gearbox set that I bought is the same size as the stock ones, it's just that some of the screws included with the metal upgrade set are shorter in length. so I ended up using mostly the stock screws with the car. You can actually install the metal shock towers to the metal gear box without modifying it, but it's my personal preference to use the stock metal tower because I'm worried about the screws bending and I don't have a drill or a dremel as of the moment so I'm not able to fully show and explain what needs to be modified at that time. I haven't installed the metal pinion and the metal geared driveshaft yet since the stock ones are still working fine, I will use them once I upgrade the motor. What I'm thinking was that there are variants of this metal upgrade set that has either compatible or incompatible screws and hole sizes, and some of the online seller's description of the item is inaccurate so I don't know about the set that you got but mine is compatible. I wish I could still find the link of this set from shopee or lazada, If I do I'll post the link here. Welcome po, thanks.

here's the link www.alibaba.com/product-detail/Wltoys-Remote-Control-Car-Parts-Metal_1600243034980.html?spm=a2700.galleryofferlist.normal_offer.d_image.649b52697Nh3nq

you can order the set on shopee.com or alibaba or aliexpress.com, just type in "wltoys 124019 metal upgrades" on the product search and you'll see it. sorry I can't post the link here my friend.

Thanks man, been busy nowadays but yes, glad you like it. alright, thanks for watching 😄

Yep done that along with this mod, also found out that a 3m high grade duct tape works better than flex tape. CA glue + Duct tape is an awesome combination, next time I'll try bead-lock rims.

Hi ma'am, Hindi din naman po ako magaling mag english nung simula, basic as in tama lang po ako makipag usap ng english noong simula ko sa call center. Pero nung tumagal ako doon lang ako nahasa o nasanay po. I say go for it, as long as marunong ka mag english then pwede ka mag apply, but still mas maganda po if may practice ka at research about call center work din para mas maganda chance mo makapasa at matanggap po.

You can get the wing from Aliexpress, available in four colors for only $1.64 each,, shipping fee may vary depending on your location. here's the link: www.aliexpress.us/item/3256804590294224.html?

😄

Lol glad you like it my friend, yes many owners of this RC were skeptical about the metal upgrades and it's nice to know we got it figured out, aluminum = tough and looks awesome, but requires effort to make it work. or just like they say "with great power comes great responsibility" simple as that. Thanks for watching 👍

Well when I started to apply as a newbie, I had zero knowledge and experience working in a call center too. Just stay positive and don't overthink about passing or failing but instead you must focus on learning. Once your trainers see your willingness to learn and determination to do the job right, then you'll get a better chance to pass the training. good luck 👍

Not sure, but way back 2019 it's allowed. I think telling the customer about the survey is considered phishing nowadays.

@@Rock-On-Ron Exactly

😄

Yes I believe that the 124007 has the same chassis and parts, except for the latest 124008 which has a plastic chassis.

Not sure where to find one nowadays, I've never heard of Tamiya restocking this model after it's gone out of stock. There could be some resellers out there that would sell at a higher price.. good luck on finding one.

Yes I do have plans to further upgrade this car, but also my 2nd option was to simply buy the brushless version which is the 124017 V2 then simply transfer the metal upgrades there since they're the same chassis. Yep they're getting cheap now, so if you're going to buy one I highly suggest you get the 124017 V2 if it's available for cheap there, also I think $91 should be enough to buy the metal upgrades, but it may depend to the pricing of the seller you're buying it from, could cost more or better less.

@@Rock-On-Ron Okies cool. Maybe you can do a vid on your next project. If you get the 17, at least you can use the 19 to bash around. I find it a better option to buy the 19 so I can just use my own electronics and motor. Im gona try using a Sensored ESC and Motor. Its a 540 sized 3.5T. My goal is to reach over 160km/h on 2s. But i know it consumes a lot of battery faster than Non-Sensored Motors so i have to use the lipos in Parallel.

​@@judybustamante9859 Ok so if you have a spare hobby-grade better quality ESC and motor then yes indeed the 19 can be a better option for you, also the 19 has a unique charm or quality that it seems more durable compared to the other releases, I got mine way back when it's newly released and it's still working, I'm not sure but I think the first batches of 19 that they release and also the 17 V2 series was manufactured right, so that could be why. The latest releases after the 017 V2, just feels inferior especially the 124008 which has a plastic chassis. I think they're cutting off production costs which can lead to poor quality I'm not even sure if they still produce the 19, which makes it seem rare, all in all it's just my opinion yes you can go for the 19. Yep, I'm seeing a lot of 17 V2's on sale nowadays and I'm getting more interested to get one, it's just that I'm a bit worried knowing that there are sellers out there that still sells the 17 V1 which has the cogging issue. When I get one I'll vlog about it.

😆

No totalmente mi amigo, solo las barras de unión de los brazos oscilantes torres de choque cvds soportes del buje delantero y trasero y el buje de dirección son las únicas piezas compatibles con el 124008

Hi, The side skirts are custom-made thru CNC and powder coated by my friend.