2024 Electric Wheelchair Programmers & Programming 352-999-4477

  Рет қаралды 10,845

astrosmell

astrosmell

Күн бұрын

352-999-4477
www.joystickre...
Ship to:
IMP
6672 W. Grover Cleveland blvd.
Homosassa Fl. 34446
1800 717 1252 old phone number
www.ElectricWheelchairParts.com
Electric Wheelchair Parts and Repair
Understanding Powerchair Programmers

Пікірлер: 64
@sharkybelgard8686
@sharkybelgard8686 5 жыл бұрын
You’re doing a great job Frank. Thank you. I’m going to call you when I get my Angel’s chair out of storage. It was running great six years ago then six months after her passing I plugged the charger in and the joy stick lights were flashing. I’ve watch your videos and know you can help. 🙏🏻🙂 I’m sure I’ll need batteries
@richardbarkley9909
@richardbarkley9909 6 күн бұрын
Will the ZD-08 programmer program a PG Drives 2 button joystick on a Jazzy Select Elite chair? Thanks!
@astrosmell
@astrosmell 5 күн бұрын
No, Ive have never heard of that programmer. It is a PP1 we have one for sale, as well, we can program your module to your specs for $89. Frank 352 999 4477
@austinmoore26
@austinmoore26 6 ай бұрын
I definitely need one of these
@astrosmell
@astrosmell 6 ай бұрын
If we have the one that will work, $89 to program. Frank 352 999 4477
@technicholls
@technicholls 5 жыл бұрын
Hey Frank, Thanks for another video. We have an Invacare Pronto M91 chair. What programer is used for it and what is the cost? Also, we have an older Permobil C300. Can the same programer be used for it?
@brianfindsall
@brianfindsall 3 жыл бұрын
Hi please can you tell me what it would cost approx if i take it to nearest dealer to have my speed limit corrected. this is due to putting smaller all terrain tyres on i am bnow loosing about 2 mph so need correction. but live on tight budget. so hoping it dont cost are and another leg. Thankyou mate liking yer vlogs. Bri n Sue
@astrosmell
@astrosmell 3 жыл бұрын
You do not have nearly enough information for me to help you out please let me know the make model of the machine if it is a Chinese made machine folding chair chances are there is no programmer that’s going to help you you can always call me at 1-800-717-1252
@DDinVT
@DDinVT Жыл бұрын
What (if anything) would be compatible with a Yanteon controller?
@RbStore-e4m
@RbStore-e4m Ай бұрын
Hello, how are you? I hope you are well. I have a Quantum wheelchair. I bought a controller because the one I had got wet due to the connector that charges the chair. I bought another one because it didn't want to work. It doesn't start working after it got wet and on the screen it says "Registering the Network." The controller I have now is doing the same thing. I would like to know if you can tell me what I can do to fix it. My controller got wet and I put my chair on charge like that and then the problem came. I thought it was the controller, but now I know it isn't because with the new controller it does the same thing.
@astrosmell
@astrosmell Ай бұрын
By controller, do you mean the joystick? You got a new joystick, and it does the same thing? Let me know... Frank
@RbStore-e4m
@RbStore-e4m Ай бұрын
@@astrosmell Yes. I bought a joystick and it does the same thing, it doesn't work on the chair, it just shows the Configuring the network screen :
@TatteredStraw
@TatteredStraw 2 ай бұрын
I have a jazzy 600 ES that was programmed. Is there anyway I can reset it to factory speeds without a programer?
@astrosmell
@astrosmell 2 ай бұрын
That is a good question. The answer is no, the only way to get it back is through a programmer. We have one, $89 to reset. Would need the joystick and the module. Thanks, Frank 352 999 4477
@matthewsjourney2064
@matthewsjourney2064 5 жыл бұрын
Hey frank i have a pride victory lx 10 sport is there anyway i can get this thing to go faster it is built like a tank but seems a bit slow
@astrosmell
@astrosmell 4 жыл бұрын
call me 1800 717 1252 Thanks, Frank
@bbroken1
@bbroken1 4 ай бұрын
Hello, i was wondering what is a good programmer for the quantum q-logic 3 joystick its on a forfront 2 chair? Thanks
@astrosmell
@astrosmell 4 ай бұрын
eleasmb6976 only choice Frank-
@rheamarschall1662
@rheamarschall1662 4 жыл бұрын
I bought a Dynamic dx programmer and when I tried going to the tech setting it asked for the 3number code. Is their any way around this? I bought it used.
@P1XI3_ANG3LS
@P1XI3_ANG3LS Жыл бұрын
Are you able increase the max speed of 6mph, on a 2020 permobil F3? Thanks.
@astrosmell
@astrosmell Жыл бұрын
I do not believe that you can increase max. speed. There is a mechanical limit to the paired motors and gearboxes at 24 volts. Thanks, Frank
@patkearney7126
@patkearney7126 5 жыл бұрын
hi frank would the programer tell me what is wrong with joystick that wont turn on ? it is a 6000 quantum pride
@moon03210
@moon03210 7 ай бұрын
Have an Sp1B V 2.77 doesn't work on Pride Gogo's for some reason. Stuck in ' entering menu' mode when connected to molex . Tried key on /off etc Any special way to enter the controller? Buttons to push? SP1B supposedly is the ultimate programmer /engineering version. It does work on many others (also have 3 prone adaptor tip for sp1b that works on some newer scooters just not on some..like Gogo's..) please advise Thanks
@astrosmell
@astrosmell 7 ай бұрын
I believe that the trouble is most likely that the system is an "S drive". The S drive I believe has its own programmer. (not the SP1)
@zenza64
@zenza64 10 ай бұрын
Not sure your channel is used still but I have a quantum q6 edge and the controller went out I tried buying one but it was just fro a edge 2.0 not then Q6 but it would freeze on then Q boot screen does this need to be programmed to unlock or is it the wrong controller but the part number is the same but if it needs a programmer can you tell me what programming to use
@astrosmell
@astrosmell 10 ай бұрын
Give me a call. Frank 1800 717 1252
@LieutenantDan-cw7tu
@LieutenantDan-cw7tu Жыл бұрын
I have an Amy Fastrack M3 that's very slow like 1 or 2 mph but fast in reverse can you reprogram it to a faster speed?
@astrosmell
@astrosmell Жыл бұрын
From what I gather, the alltrack has an Rnet system. At this time, we do not have the programmer for Rnet. We can get you one, but they are not cheap. I believe around $550
@kpc5
@kpc5 2 жыл бұрын
I need a PP1 programmer because my chair has crashed and i need the programmer, where can i buy one from??
@astrosmell
@astrosmell 2 жыл бұрын
We have one for sale.. Give me a call, Thanks Frank 1800 717 1252
@TheRam9126
@TheRam9126 3 жыл бұрын
what programmer would work on ewheel mobility scooter?
@stuartnicholls7531
@stuartnicholls7531 7 ай бұрын
Hi Frank, I am Nick from the UK to start I bought a 2015 quickie i cant read the model number but the seral no 4451224. it has a 3pin plug and the controller is a PG Drive Tech the label is printed D51122.03 and BN15020208 an embossed no in the plastic PA66-GF25 . my problem is its to vicious for my wife. can it be programmed to be slowed down , the joy stick to have more movement and generally made a lot more comfortable to operate. if this can be done is it possible to download software to update it. thanks
@astrosmell
@astrosmell 7 ай бұрын
You have an RNET system. You will need a RNET programmer. The least expensive one is PC based. If we had one we could do it for you, but we do not. If you are interested in getting one give me a call. Frank 352 999 4477
@450mijaou1
@450mijaou1 Жыл бұрын
Do you know what programmer is needed for a quantum edge? I bought a PP1 quantum edition. But it doesn't read my chair. I know it works because I was able to adjust the speed on my pride Jazzy.
@astrosmell
@astrosmell Жыл бұрын
You need a quantum controller. Not a PP1. Depending on age of your electronics, there is a choice of 2. One for older one for newer. Thanks, Frank
@450mijaou1
@450mijaou1 Жыл бұрын
@@astrosmell I got a 2022 q6 edge HD and a 2019 Q6 edge 2.0.
@felipeoliveiraassistencia7849
@felipeoliveiraassistencia7849 Жыл бұрын
information as well? How to get it. Here in Brazil it is impossible...
@GhostvaperYT
@GhostvaperYT 3 жыл бұрын
i got a programmer software and dongle for my mobility scooter the rascal ventura - now it takes off like a turbo..........................fast!
@tonyrodriguez9163
@tonyrodriguez9163 2 жыл бұрын
I have a buzzaround Lx mobility scooter can I make it go faster
@abednier
@abednier 3 жыл бұрын
Great video by the way , but I want to ask about INVACARE G40 AND G40plus models. they need programming Can the DX programmer be used on them. or do they need a software like LINX? And could the MK6I program The DX joystick(DX-Rem 24SC) and (DX- REM 24S8) your insight is highly appreciated.
@astrosmell
@astrosmell 3 жыл бұрын
DX programmer, I believe, no adapter is needed. Small plug in. Call if you like. Frank 1800 717 1252
@abednier
@abednier 3 жыл бұрын
@@astrosmell thank you, I have 1 flashing light on my joystic DX-Rem 24SC) MANUAL inicates that i should rep[lace electronics, power module status light green light module status green joystick staus flashing one time, so I figured that it would require programing. will the DX programmer resolve this issue? I sent a message on your website , so I dont know if you have received it. Does frank has a mobile number , so I can do a contact on whatsapp ? Regards
@davidwarren7900
@davidwarren7900 2 жыл бұрын
My electric wheelchair won't move I checked the voltage and it said 24.2 and it's flashing all the lights 8 times
@astrosmell
@astrosmell 2 жыл бұрын
Not quite enough info. Please call. 1800 717 1252
@AndrewSim-l6g
@AndrewSim-l6g 23 күн бұрын
Where do get the 3 pin programmer
@astrosmell
@astrosmell 23 күн бұрын
Call me 352 999 4477 Thanks, Frank
@astrosmell
@astrosmell 5 жыл бұрын
Thanks for all your questions. We try to answer them all. If you have an open ended, or tricky question, please call. We are available 9 - 5 Mountain Time. 1800 717 1252. Thanks, Frank
@robdriver5131
@robdriver5131 4 жыл бұрын
What programmer do I need for a drive cirrus plus ec?
@astrosmell
@astrosmell 4 жыл бұрын
PG drives PP1 programmer, We have one.., Thanks,Frank 1800 717 1252
@TheRam9126
@TheRam9126 3 жыл бұрын
WILL DX PROGRAMMER WORK ON EWHEELS MOBILITY SCOOTERS?
@astrosmell
@astrosmell 3 жыл бұрын
DX is for powerchairs, more accurately powerchairs with Dynamic control systems. (Dynamic is the manufacture)
@TheRam9126
@TheRam9126 3 жыл бұрын
@@astrosmell what kind of programmer do I need for a ewheel mobility scooter
@astrosmell
@astrosmell 3 жыл бұрын
what is the make and model of the joystick/ module? Sometimes, manufactures systems are a 1 off and cannot be programmed.
@TheRam9126
@TheRam9126 3 жыл бұрын
@@astrosmell it is a E Wheels mobility scooter
@larryjames965
@larryjames965 5 ай бұрын
how much for a programer for a jazzy 600
@astrosmell
@astrosmell 5 ай бұрын
Larry, what joystick is on the Jazzy 600?
@larryjames965
@larryjames965 5 ай бұрын
@@astrosmell it doesn't say on joy stick
@astrosmell
@astrosmell 5 ай бұрын
www.joystickrepair.com/joystick-identification
@muratgokdag3517
@muratgokdag3517 6 ай бұрын
👍👍👍👍👍👍😊
@Soulstealer24
@Soulstealer24 5 жыл бұрын
Hey, nice videos. I was hoping I can ask a few questions and get the answers u might have for them
@briarz101
@briarz101 4 жыл бұрын
wireless mic to plug into your cam is cheap! Can barely hear you
@mustangperry1469
@mustangperry1469 4 жыл бұрын
i have victory 10
@astrosmell
@astrosmell 4 жыл бұрын
Feel free to give me a call. 1800 717 1252 Frank
How to Program Shark Dynamic Controllers - Shark Dynamic Joystick
5:59
Marc's Mobility
Рет қаралды 2,7 М.
She's very CREATIVE💡💦 #camping #survival #bushcraft #outdoors #lifehack
00:26
Миллионер | 1 - серия
34:31
Million Show
Рет қаралды 2,9 МЛН
Кәсіпқой бокс | Жәнібек Әлімханұлы - Андрей Михайлович
48:57
Control any e-wheelchair with your phone/RC controller: crowed source
7:57
Reciprocal Circulation
Рет қаралды 13 М.
No More Trailer Woes: My Electric Towing Solution!
17:49
Made in Poland
Рет қаралды 6 МЛН
VLOG 137: the fastest wheelchair...
7:06
Totally Normal
Рет қаралды 52 М.
2024 Hoveround wheelchair Fix repair 352-999-4477
6:44
astrosmell
Рет қаралды 10 М.
inside a power chair gearbox! (VLOG 435)
19:45
Totally Normal
Рет қаралды 38 М.
Hack a powerchair and make it fast | Part 2
17:29
trowan techworks
Рет қаралды 4,3 М.