idk why you'd ever use a heat gun on PLA. You immediately warped the ears from the heat. But I appreciate the video. I ordered some of this PLA and was worried it wouldn't actually work
@lauramckenzieatkins98492 жыл бұрын
I used your tutorial to make a dice pouch for my husband and it turned out so great! Thank you!
@chinapolyimidefilm42092 жыл бұрын
Kapton Tape to your 3D Printer Print use widely
@ZafodB32 жыл бұрын
It would have worked better with some Al DiMeola!
@prashantkalshetti38352 жыл бұрын
Sir I have one pen in wooden two side one side blue and other side red
@prashantkalshetti38352 жыл бұрын
You are creat me
@oescobardo2 жыл бұрын
The video helped me making one of these for dices. Mine ended up not so good, but it's good for a first leather project. Thank you.
@junepolk50972 жыл бұрын
I tried aluminum etching last night and after 2 minutes it started bubbling and got real thick I got scared. Will it explode on me. It never etched as I took out my metal after 3 mins. So it’s the aluminum that causes this reaction.
@johngriffin6183 жыл бұрын
What probe is that?
@javieruriel3 жыл бұрын
Can I do this with silver?
@JoeyIngles3 жыл бұрын
Consider using baking soda instead of acetone. It’ll neutralize the acid.
@johnnyblade60883 жыл бұрын
I've been looking for this video for a long time. Out of all the video's I've seen, this one was it. Thank you!
@diegomz16773 жыл бұрын
exelent work, congratulations. those objects inside the bag, where can I find them? what is the name for them also. thank you
@lwo77363 жыл бұрын
Cool! You can also fill in the etched areas with nail polish and scrape away the excess with an old credit card
@gamaybear4 жыл бұрын
we make brass markers kzbin.info/www/bejne/hauTpH55mbGFgq8
@felixaviseyii88784 жыл бұрын
YOU MADE A FOUNTAIN PEN 0o0 I'm amazed
@noe6164 жыл бұрын
best method so far
@brahilly4 жыл бұрын
Nicely produced clip. Photo-resist will give far superior results. The color and foaming of the Ferric Chloride lead me to think you've added some nitric acid to it.
@stefanrosuljas36634 жыл бұрын
Great work! I've been trying to make something similar, but I can't figure out how to make bottom that fits to sides, I always get the dimensions and number of stitching holes wrong. Any advice ob that, some formula maybe?
@fallaslockheed83334 жыл бұрын
Ferric chloride is used as a coagulant in wastewater processes
@sticraft414 жыл бұрын
Been trying to figure out a design for a friend and that's one of the best I've seen
@nelsonwalkom4 жыл бұрын
Great video! Nice procedure. Thanks
@Wurlipurili4 жыл бұрын
Montage reminded me of This Old Tony)
@kathymihalko3284 жыл бұрын
what is the software you are using looks like fun!
@alialiali200225 жыл бұрын
Just wanna know which drawing saftware used to design your work.
@InventorEgoSum5 жыл бұрын
I used GIMP, which is free software .
@alialiali200225 жыл бұрын
@@InventorEgoSum Thanks a lot
@davearonow655 жыл бұрын
Great idea. I imagine this would be a gopd method for really long bpards too, with a longer channel and an infeed and outfeed table. Thanks for the vid.
@BengkelEtching5 жыл бұрын
👍👍👍👍👍👍👍👍
@vernslasershow36815 жыл бұрын
So if you apply it, do you still need to put glue?
@wiretap253 жыл бұрын
I use kapton tape only. I've never used glue, hairspray, abs slurry, painters tape,. etc. Never any issues with 1st layer adhesion. Bed leveling and having the bed heated to the right temp for your type of plastic is key. Having an enclosure and preheating about 30min beforehand helps any warping as well.
@mohammadferdoussalim58565 жыл бұрын
Mate i like your attitude. its great...
@justinmagill58615 жыл бұрын
Were you able ever to prefect the transfer process?
@whosle5 жыл бұрын
Ppl r saying this should be under the bed. Haters goina hate.
@markfrench88925 жыл бұрын
A bit over complicated I'd say. There are much better ways applying photo resist. And yes I do photo etching.
@trapper93965 жыл бұрын
Great video, it even looks like something I may be able to accomplish. Do you have a source for that toggle?
@InventorEgoSum5 жыл бұрын
Thanks! It was from ebay, not sure if it's the same one but it's definitely the same seller: ebay.us/LEHXmb
@trapper93965 жыл бұрын
awesome. thanks for the info
@ashleycaldwell53426 жыл бұрын
Just use copper sulphate solution. Aluminium and Ferric chloride is asking for trouble.
@ProyectInvestigation6 жыл бұрын
True, it is extremely dangerous.
@ashleycaldwell53426 жыл бұрын
Atlas Millet produce a nice little explosion, and some mustard gas...
@chipcurrin6 жыл бұрын
Love it, I want one of those for myself !
@ungzheenedd22736 жыл бұрын
HI! Nice video! could you inform me the measurements you used in the vid? Thanks :)
@InventorEgoSum6 жыл бұрын
Thanks! The main rectangle was about 24.5cm x 10.5cm and the circle was about 8.5cm diameter. The stitching edge was around 0.5cm. Hope it helps!
@ungzheenedd22736 жыл бұрын
Inventor Thanks for replying!!! Such a great video, can't wait to make it😍
@populargaming3.0864 жыл бұрын
@@InventorEgoSum thanks it did im making my bag now
@gregh42842 жыл бұрын
Nice project, thanks for showing!
@adamandharrys6 жыл бұрын
Nice, does it change colour in your hands or tap water?
@InventorEgoSum6 жыл бұрын
It changes colour with a temperature of around 30 degrees Celsius, so it does change when holding it for a while. With hot tap water it changes really quickly.
@adamandharrys6 жыл бұрын
Inventor thank you for letting me know 👍
@InventorEgoSum6 жыл бұрын
No worries!
@pirobot668beta6 жыл бұрын
Oh! Just like applying a 'film-kit' to a glass window! Cool.
@dave18126 жыл бұрын
why did you etch the plates before putting on the design?
@InventorEgoSum6 жыл бұрын
The idea was to make the surface rougher so that the toner would stick better...
@gregac19845 жыл бұрын
Did the idea work? I am just starting to try this. I had good luck with printing on label sheets with the labels removed and then ironing the page onto the brass sheet.
@jasonphone116 жыл бұрын
Just made my first wallet, this is definitely my next project
@InventorEgoSum6 жыл бұрын
Awesome, I'd like to make my own wallet too at some point, any pointers?
@jasonphone116 жыл бұрын
Inventor i used a basic bifold kit from Tandy leather, i got it from a store front, but they supply online as well.
@InventorEgoSum6 жыл бұрын
Thank you Jason!
@danialk84356 жыл бұрын
What a thoughtful and caring human being. That is so kind of you!
@InventorEgoSum6 жыл бұрын
Thanks :-)
@CX500C6 жыл бұрын
Beautiful work!
@InventorEgoSum6 жыл бұрын
Thanks!
@RJBWoodTurner7 жыл бұрын
Really nice job on the video, the mechanical pencil turned out great!Regards,Bob
@InventorEgoSum7 жыл бұрын
Thanks Bob, I really appreciate it!!
@percentexz64127 жыл бұрын
Cool
@InventorEgoSum7 жыл бұрын
Thanks!
@eugeniamoras70277 жыл бұрын
voyager.jpl.nasa.gov/spacecraft/images/golden_record_cover.gif Hi Inventor 👓 would you make one of these? 🙄
@InventorEgoSum7 жыл бұрын
Maybe, but it will take some time before I get back to etching or engraving.
@eugeniamoras70277 жыл бұрын
Thanks Inventor. Looking forward to it :)
@NotRealNamesAgain7 жыл бұрын
Nice. Your videos have a "This old Tony" feel. Looking forward to more.
@InventorEgoSum7 жыл бұрын
Thanks! He is definitely an inspiration...
@davidrv19877 жыл бұрын
Nice and fine piece of work. Well done!
@bobbg90417 жыл бұрын
You Tube : Where you can go to watch others work!
@davidrv19877 жыл бұрын
Absolutely awesome! Well done Inventor. Keep the videos coming
@zzing7 жыл бұрын
The harsh music surprised the hell out of me, I had my volume up. Might want to tone down the starting of the music.
@InventorEgoSum7 жыл бұрын
Fair enough, I'll take that into account for my future videos. Thanks!