Ай бұрын
7 ай бұрын
Жыл бұрын
Пікірлер
@rickynavarrete3911 Күн бұрын
How do you put it back lol struggling to put back seat where the hole is
@punkboy459 2 күн бұрын
I'm curious did you reused the same subframe bolts? I kinda did but no issues however many told me I should've used the new ones..
@davebuilt 2 күн бұрын
Been watching your videos for a while now Will! Thank you for documenting your journey with the chassis. Have a similar path mapped out with mine and as a diy guy, it’s super helpful to visualize the process through your videos and have potential trials and tribulations documented!
@punkboy459 2 күн бұрын
I'd recommend you get RTD shifter, one of the best MOD ever for e9x
@wurslegumage 2 күн бұрын
Very nice! What spacers did you need to centre the seat and where abouts did you put them? Did they go between the seat and the seat bracket?
@BLUPRINT1LE 4 күн бұрын
Thanks for sharing this video! I am thinking about gutting my camaro and I've been going back and forth with it but I think its time to bite the bullet lol
@NRod.M3 5 күн бұрын
How are the vents with rain? Any issues?
@norcaldailydriven 8 күн бұрын
Hey will my engine/drivetrain moves a lot on and off throttle and I have new stock motor mounts and 10k mile old trans mounts. Is that what you were feeling lots of on/off throttle movement?
@WillsGarageOfficial 7 күн бұрын
No, the movement I felt was mainly side to side during cornering. I would guess yours has to do something with the drivetrain/driveshaft/differential.
@Fizz826 9 күн бұрын
Great video! Do you know if the backing plates on these uses mechanical attachments, i.e., hooks or adhesive?
@WillsGarageOfficial 9 күн бұрын
There aren't any mechanical attachments for pads used on the AP9660 caliper which are shown in this video.
@Fizz826 8 күн бұрын
@@WillsGarageOfficialI meant to ask do you know how the pad’s friction material is attached to the pad’s backing plate.
@kristers.g3901 10 күн бұрын
Is that a permanent fix or will it happen again next time?
@spoolindsm127 12 күн бұрын
Great video. Should have done this when I had the driveshaft out of my car... twice. Damnit.
@LdtEntertainment 12 күн бұрын
Hey Will, sorry if I missed this but did you ever get a chance to weigh the car? Im curious how much it weighs fully gutted
@leefunkera 12 күн бұрын
Hey which organization did you run with here?
@Camarorsgirl 12 күн бұрын
Thank you I’ve been to the tire shop like once a month bc the weights fall off. Thankfully I got a tire care package w pep boys so it’s free but it’s annoying to waste almost a whole day out of my weekend to wait on them
@neilsimmons9582 13 күн бұрын
Thanks for this. Have a 2017 X5M which I bought used and blew a rod at 61k miles. BMW dealership quoted me 46k for a new engine replacement and independent shops are having a problem sourcing a quality used one. Will give these guys a call RKautowerks a call tomorrow.
@e.l.1374 13 күн бұрын
Nice when you do yourself, but what are the chances a tire shop will be careful when removing wheel weights and not scratching up the inside of rim?
@Smzxe 17 күн бұрын
That's old S8 as well newer phones have so much better gps
@miketurin5233 20 күн бұрын
Interesting. Or you go to a shop and pay $50 to get it done.
@pierrevelez3484 24 күн бұрын
I wouldn’t do this for any other car❤
@jounistactics 25 күн бұрын
What are the dollies you are using under the subframe ?
@TheThiuser 27 күн бұрын
Good job. Struggling with some suspension setting it seems. Can you share camera and mic setting/setup
@Discreetspd 28 күн бұрын
Sweet save! That would scared the crap out of me. Fast thinking there 🙌
@Discreetspd 28 күн бұрын
Hey 👋. What were your thoughts on the upgrade here? Did they make a difference on the loose transmission feel you mentioned at high rpms?
@WillsGarageOfficial 28 күн бұрын
It definitely helped but I think I need to upgrade the motor mounts as well which will make it even better.
@Discreetspd 28 күн бұрын
@WillsGarageOfficial thanks for the response. Tackling all of this currently myself. Decisions decisions. Look forward to more videos 🙌
@dcarIos Ай бұрын
How is the x-pipe holding up?
@WillsGarageOfficial 29 күн бұрын
It’s holding up great. No issues so far.
@dcarIos 29 күн бұрын
@@WillsGarageOfficial Nice! Did you dyno at all by chance?
@John-g5t1g Ай бұрын
What year model?
@shotz1874 Ай бұрын
What's the link to that cart
@anttheman6370 Ай бұрын
I had a e92 m3 before my m5 too!
@WillsGarageOfficial Ай бұрын
Awesome. Which one do you prefer?
@anttheman6370 Ай бұрын
@@WillsGarageOfficial so hard to choose over all probably the m5 but the m3 was more exciting to drive i miss it
@Kreemy95 Ай бұрын
Commenting just in case anyone else decides to do this. That place you put the bolts works fine as this where team schirmer also put it but the aerocatch needs to face the other way round. The bigger parts needs to be closer to the headlights. I'm glad you managed to make it work though
@davec3568 Ай бұрын
They need a couple heat cycles to perform optimally.
@jRkNbOi Ай бұрын
What was the app called to put the car in service mode ?
@dean_sanchez Ай бұрын
I noticed your screen resetting the first lap, mine does the same on track not sure why though.. eventually gonna remove it anyway
@WillsGarageOfficial Ай бұрын
Same thought here. Going to remove anyway. I think it does that because of the heat.
@fstlnj29 Ай бұрын
Think the rivet actually take a t25 torx bit and unscrew
@HQTrackdays Ай бұрын
Buying and E92 and doing full track build so I will enjoy learning from you Will! I like that you didn't use any bad language get the seat out. Can't say I won't 😂 Subbed 👍
@Redcoatracinguk Ай бұрын
When I saw you drilling the pins in that position I was like ohhh no the bonnet ain’t closing there.. i installed them on my e92 about a month ago, put the studs in down on the structure that held the original latches
@Jackety123 Ай бұрын
Shave the lip down just in that area of the cross member! If you do it neatly I don’t think it’ll look bad at all! 👌🏻
@IronMike-f8i Ай бұрын
B.M.W. 😢😢😢😮😮 BRING MY WALLET.
@iHATEmyUSERiD Ай бұрын
Ordered these over a week ago from BlackHawk and there hasn't been any updates. Just wanted to ask how long did yours take to process before it got delivered?
@TerryManitoba Ай бұрын
why would you want a longer shifter for track use? Considering it turns your Short Shift Kit back to a long shifter???
@JayL75 2 ай бұрын
Will, great content! I assume you couldn’t find the PMU pads in stock rear spec? So you are running ferodo on the rears? Did you feel any brake bias issues?
@WillsGarageOfficial Ай бұрын
PMU makes pads that fit the stock rears as well. I already have DTC60s in the rear so gave them a try. DTC60s have more bite so there is a bit more bias in the rear which I found helps rotate the car while trail braking but sometimes unstable in a straight line. Honestly, I got use to it after one session but take what I say with a grain of salt since I'm no pro! Here's the link to the stock rears from PMU. bit.ly/3Y7Nv8A
@JayL75 Ай бұрын
@@WillsGarageOfficial thanks a lot! I will give them a try. My current setup is front biased which I’m managing but don’t like. So want to play with pads a little bit
@AustinChappell 2 ай бұрын
As someone who is debating this job since my sf is toast, about how long did it take you?
@VezcarVX01 2 ай бұрын
Does anybody know if this can be done properly with a snap-on Zeus+ scanner?
@brainofjjj 2 ай бұрын
These cars are so much heavier than the e46
@RetreatHacker 2 ай бұрын
Your interior is party in the back, business in the front, like a mullet
@RalliartRsX 2 ай бұрын
Did you ever figure out how to make them button work?
@Bizb525 2 ай бұрын
thank you for doing this video. Picking up a supercharged car and want to do this job so I dont break diff bolts. Guess well really see if I need to buy a press when the time comes 😂
@Therealrichdude 2 ай бұрын
Thank you for the video. Saved a lot of people $$ for new B pillars, 😅
@frankgonzalez534 2 ай бұрын
What year is your car? From what year did they come with electric rear brake?
@etherjoe505 2 ай бұрын
Hey Will I'm a Bay area BMW fan. Own an E39M5. Any suggestions on clubs or meetups to check out ?
@mrz5705 3 ай бұрын
Brilliant footage Will. I would recommend a pair of cattle veterinarian gloves however...
@juice7661 3 ай бұрын
Do these arms come with any warranty? I'm skeptical about running this arms with exposed balljoints like this. Dirt/ grime will get in and they will have play before 20k miles I feel like. I'm seriously considering the G.A.S covered mono ball alternative.