This is actually something I am working on currently. Short answer, I believe so but I am unsure which mosfet is best. I will likely release a video on the finished M249 build when it is complete.

Jk Army is your best bet. I know aliexpress carries them as well.

During the development of the product, they showed videos of it holding zero on a 5.56. They claimed it would old zero with 5.56 as well. I personally would not trust such an "expensive" replica to withstand sustained recoil for long. I can tell you that I used their Elcan replica on my 5.56 and it held zero for a few hundred rounds.

@@adrenalineactual4261 so you think they will have no problem holding a zero on a gbbr airsoft?

I would say prob not, but if it does that’s the biggest steal in history

The box mag comes with wiring already. All you have to do is plug it in.

The battery is connected in the bottom of the magazine. The gun comes with regular size Deans connectors. I have switched them to XT60 for better power delivery.

They both have equal brightness.

did you ever get a reply? im in the exact same boat

You can ask us questions. [email protected]

@@mysticknight90 You can ask us questions. [email protected]

You can ask us questions. [email protected]

Bullgear entered the chat! They are your best bet of course, but yes you can.

El bípode está sujeto a un sistema de gas falso. Retire el cañón y retire el tornillo de fijación que sujeta el tubo de gas en su lugar. Deslice el tubo de gas fuera del cuerpo y el bípode saldrá.

@@adrenalineactual4261 gracias

Sorry for the late reply. It is my understanding that it would work yes. There is some wiring involved, but the product comes with a diagram for different wiring scenarios.

Probably don’t have the GTX version

That sounds like some terrible luck. I hope you were able to warranty it, and they sent you a fresh pair. I have not had a problem with weatherproofing on GTX models.

@@irnbdg Oh yes they were the GTX version, I checked all the paperwork and the boots. They were in a nutshell crap. But replaced for a different make via warranty at GO Outdoors.

@@adrenalineactual4261 Wonderful staff at Go Outdoors Ipswich after I finished the C2C were 1st class. No issue with warranty and took away Meindel leather boots instead.

I just sent mine to Evike for them to figure this out, hopefully they can. Did you ever end up doing this or find out if its possible?

@@texasred8125 this style of m249 is not compatible with the gate titan. You need one of the versions that uses a v2 gearbox

@@jhqtech right I know, I have a G&P m249 which has the V2, should have been more specific. I installed a gate titan into it. I sent it to Evike to have the Bullgear mag installed. The tech who could barely speak or understand English told me that it will not work with the Gate Titan, but he wasn’t even aware of the fact that they carried the product in the first place, so I don’t know. Ive had bad experiences with this tech before on other guns so I don’t really take his word for it

@@stevenlundrigan3977 I unfortunately am not the the electrical engineer I wish I was. I do think it is possible. The product comes with a diagram that has wiring for multiple scenarios.

At the time of this event we had not set a specific standard on kit. If it were to be compared to anything, it would resemble a lite long range SF kit. I was wearing an airframe with peltors, Haley DC3R chest rig and flat pack, with a belt system I cannot recall. I was on a Block 1.5 kick hence the older style rifle/ optic combo. Our current loadouts are SOP driven by the group we have aligned with. That kit is highly specialized and customized for fit and finish. All of us use either Crye AVS’s, SPC’s, JPC’s and various chest rigs (different mission sets), maritime helmets and Ronin, Eagle or Ferro Concepts belts. Nearly all of us are using the M4 with the URGI rail and mid to long range optics. I know that was a long answer to a short question, but answers it specifically.

@@adrenalineactual4261 Ok thanks!

Hope mine are perfect too. Bought blindly on garand thumb’s recommendation of the older model without watching other reviews.

how long did shipping take ?

@@SalvationActual I did free shipping, so roughly a month. Agonizing, but I wasn't going to pay $100+ for shipping!

@@keyboardcommando5146 Hey! Quick question man, I'm about to do a big purchase from Evolution Gear (EG Tactical) on their website and was just wondering what kind of communication there was. I've seen lots of terrible reviews of the actual web-service on EG Tactical not responding to emails/ignoring contact attempts etc but just wanted to know if you ordered from them or from somewhere else; and if you did order directly from Evolution. Thanks in advance!

Hi, any info on that comparsion?

@@xanulus Sorry for the late reply, don't know how I missed this. When I communicate with them, I do it though Facebook messenger, but E-mail works as well. I recommend Facebook Messenger so you can see when your message was read! If you order from them, do it only when items are in listed as in stock, through your account on their site so everything is documented. All of my headaches and miss information came when I ordered through their retail rep, when preordering. outside of that, things have been ok aside from long shipping times. Despite any issues, I can say they'll do right by you, eventually. Just make sure you keep any form of proof until your order is received and checked out.

Which model of m249 are you using?

When they were first announced, they released video of them on real steel. I have used other replica optics (leuplod MK4) on my AR and it held zero. I guess the question you have to ask yourself is: are you willing to spend this kind of cash for it to possibly break. Alternatively, Vortex offers the strike eagle which isn’t to much more than this. That of course will not fail. I would not be able to tell you how the strike eagle compares to the EG tactical or the real Razor.

@@adrenalineactual4261 I have 2 strike eagles. I'm interested in these replicas for the reticle mostly and color.

I'm looking at buying a holy warrior for my real rifle too because I want that rmr plate on top and I would be putting this on a do all rifle, bad idea?

I have one in route. Everyone worships PA optics and they are Chinese glass and optic. Going on a fun build. Hoping it works out. I'll let you know

@@rufusherman412 I'll be following this as I'm curious about the mount. Cuz I want to also get the RMR set up on top of it.

Go to my "about" and email me. I can help you through the process.

100%.

I hope you got the warranty service I did!

Im sure if you have enough know how you could make something that activates the signal wire separately. I do know that bullgear has this exact mag for the G&P.

@@adrenalineactual4261 right but for it to work i have to originally wire it to the trigger right?

My understanding of electrical work is limited, but it could be possible with significant modification. The way this is designed, all the leads terminate in the box mag, which run through a controlling board of some sort. The advantages of this design are more than one, but by far the greatest benefit it offers comes from the battery being “tied” to the box mag. You have a fresh battery with every magazine swap which is nearing the limit of the batteries capacity anyway. I actually run parallel batteries in the box mag to get more amperage and discharge capacity

How do you wire in the battery connectors? There is absolutely nothing anywhere about how to wire the battery into the box mag. Please help!!!!

@@gregs5415 Sorry for the late reply. Which model did you purchase?

@@adrenalineactual4261 was supposed to get the wiring in the box mag, but got something else. If I had a diagram I could wire it, but can’t figure it out. HELP!

@@gregs5415 email me at [email protected] and also send these guys a message: @bullgear.ru