Жыл бұрын
Жыл бұрын
Жыл бұрын
3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
6 жыл бұрын
6 жыл бұрын
7 жыл бұрын
Пікірлер
@edmelzark1069 8 күн бұрын
I have a question, I purchased some Silver Dollars from the Temu website is it my imagination or are they almost impossible to fold in order to make a ring? I broke the first three I tried and this one just isn’t working well. Are they not silver coins? Let me know what you know or find out thank you very much. Ed
@voldem273 9 күн бұрын
What you think about annealing with hot water? I tried it, but I don’t know if it really works 🤷♂️
@kb0cow 15 күн бұрын
Thanks Jason, I watched you years ago when I first starting and have several of your dies and tools, but it's been about 5 years when I last made any rings, and of course a couple of friends that have seen the ones I ware and know I used to make then want me to make them one now. I have retired and moved to Florida, 😢So after going through my tubs trying to find all my ring making tools and extras, I also wanted and needed to watch some videos on the process that I had forgotten much about, this video even though it says you did it a year ago seems very similar to one you made years ago, which I guess makes sense the process shouldn't change much, so thanks again for getting me back on track.
@TBAKATrueBrownii Ай бұрын
Great 👍🏽 tutorial-video Jason! Well done 👏🏼
@billybaycroft8197 Ай бұрын
Truely AMAZING!!! Youve got Grande Cajones buster! LOL!
@JasonsWorks Ай бұрын
I got some grey hairs on this one!
@robertdingman3041 2 ай бұрын
Can you make a re reeder for me
@kristibbradshaw 2 ай бұрын
A square bangle would be nice. I love this. Thank you so much.
@goldenarrow5201 3 ай бұрын
✌️❤️from Kentucky, thank you,nice podcast !!
@celebrityonerealty 4 ай бұрын
How do I get my new punch unstuck
@JasonsWorks 4 ай бұрын
That's not good! Can you send me an email: (info at jasons dot works) and we'll get it figured out :)
@mgtowsmurf6094 4 ай бұрын
What kind of tape?
@JasonsWorks 4 ай бұрын
I actually use blue paper shop towels now, much easier!
@josej806 5 ай бұрын
What would happen if you put something like a canvas clothe over the sixth stretcher to give it some thickness to you get it over that lip on the bottom of the stretcher
@mmcamerer 5 ай бұрын
I need to ask a question I got the Pepetools Skylar Jenkins reducing die. I t doesn’t state which side is 17 degrees and which side is 25 degrees. I know I could probably guess
@CannonCornelia 5 ай бұрын
I'm excited to make some beads.
@CannonCornelia 5 ай бұрын
Hi Jason, I'm looking forward to using your product, just having trouble placing an order. How do I get hold of you regarding an order that I can't seem to place due to shipping selections?
@JasonsWorks 5 ай бұрын
Hello. Thanks for letting me know. You can contact me through my website contact form. Here is a link: jasons.works/contact/ Thank you! Jason
@CannonCornelia 5 ай бұрын
Hi @@JasonsWorks I've sent several messages using that link. I think something is wrong with the site.
@CannonCornelia 5 ай бұрын
I'm hoping to make beads out of silver dimes. Can I do this with the Original four pack and the Original .6 x .9? I also have the Pepetools stretcher and reducer.
@CannonCornelia 5 ай бұрын
Thank you so much for the quick response and advice on what to purchase.@@JasonsWorks
@JasonsWorks 5 ай бұрын
You bet! Sorry for the contact issues and thanks for letting me know!@@CannonCornelia
@bandanz4920 6 ай бұрын
My quarters always look too dark after annealing how do i bring them back to looking nice
@JasonsWorks 6 ай бұрын
Is it silver or clad quarter? I like to use the Sally's Miracle buff pad. They are a blue foam pad with white buff on ne side and a fine abrasive grey on the other. Do the grey side first and then the white buff. I would keep the firescale on the ring until the very end though. I don't clean every time, just when I am finished forming.
@Mass-jab-death-2025 6 ай бұрын
Give a man a fish and you feed him for a day, give a man a beard and he will think he rules the world !
@lindawallace6750 7 ай бұрын
Do you sell your Rings ?
@Youtuberkit7 7 ай бұрын
Hi Jason happy thanksgiving day from Virginia. I’m new to this hobby. Can help me choose a tool kit not a beginner at least good one so I won’t buy anymore. Thanks again God bless
@JasonsWorks 7 ай бұрын
You bet! Shoot me a message from my website. Here is a link. jasons.works/contact/ I would want to start out with the starter kit but it all depends how easy you want to make the rings. I can send you some more info as well.
@goldenarrow5201 7 ай бұрын
Big thank you from Kentucky!! Good job!!
@JasonsWorks 7 ай бұрын
Your most welcome!
@goldenarrow5201 7 ай бұрын
Good job as always!! Thank you from Kentucky
@JasonsWorks 7 ай бұрын
Thanks!
@zuma3334 8 ай бұрын
Hells yeah, you rock jason. Appreciate all your guidance. Your tools and rings are fantastic!!!!!
@lindawallace6750 8 ай бұрын
Do you sell your rings ?
@lindawallace6750 8 ай бұрын
Do you sell your rings ??
@JasonsWorks 8 ай бұрын
Hello, Yes. Here is a link. Thank you! J jasons.works/product-category/coin-rings/
@lenastiward8657 9 ай бұрын
Where did you get those sanding sponges? I would like to get those for my own jewelry making. I enjoyed your video very much and thank you for sharing!❤
@JasonsWorks 9 ай бұрын
These are actually nail sanding blocks :) The best ones are from Sally's beauty supply. The fine blocks with the grey and white sides are the best from Sally's as there are imitations out there.
@lenastiward8657 9 ай бұрын
Towards the end you mentioned they were salon sponges. My question was answered.
@kenutton992 9 ай бұрын
Jjason how much for the tools you have shown?
@JasonsWorks 9 ай бұрын
Thank you for the comment. Here is a link to my site. The prices range as you can get single tools or kits. The larger the kit, the more savings you'll have. So you can build up your tools slowly as you get better making the rings or go all in. Thank you!
@giuseppevincenti2988 10 ай бұрын
Better than watching tv. Thanks for sharing your knowledge with us. Best wishes from düsseldorf germany...peace ✌️
@Coinstojewelry 10 ай бұрын
Jason, can you recommend a re-reader for a coin ring on the edge side of the coin. I think that the readers that they have now I don’t like the way they look. So I was wondering if a better free reader was on the way
@amjadarfi4621 10 ай бұрын
Was good baut very very long
@lukekelly8387 10 ай бұрын
AWSOME I learned alot,,Thanks
@JasonsWorks 10 ай бұрын
Excellent!
@davidrick4362 10 ай бұрын
Can you buy this anywhere?
@JasonsWorks 10 ай бұрын
Here is a link to the options available: jasons.works/product-category/auto-punch-coin-ring-tools/
@boydwood6104 10 ай бұрын
Its a silver bullet!
@JasonsWorks 10 ай бұрын
You bet! Check out this video ;) kzbin.info/www/bejne/ZobCXn6ao5isqdk
@timothyjohnson7521 11 ай бұрын
What is the best starter kit start to finish if you've never done it
@timothyjohnson7521 11 ай бұрын
The self centering ones
@JasonsWorks 11 ай бұрын
If just using a ring stretcher for folding and reducing, the self centering set with a spacer and steel starter cone: jasons.works/product/steel-starter-spacer-folding-cones-set/ If you have an arbor press, I like the folding mandrel and a steel starter cone: jasons.works/product/universal-stabilizer-folding-mandrel-hydraulic-arbor-presses/ jasons.works/product/universal-stainless-steel-starter-cone/
@timothyjohnson7521 11 ай бұрын
Thanks looking forward to the new manual
@timothyjohnson7521 11 ай бұрын
Where is it we can buy them
@JasonsWorks 11 ай бұрын
Hello, thanks for the message. Please visit this link to shop for Jason's Works coin ring tools: jasons.works/ Be sure to check out the FAQ page as well. Thanks! Jason
@timothyjohnson7521 11 ай бұрын
Where can you find one?
@JasonsWorks 11 ай бұрын
Here is a link to the options available. Thanks! jasons.works/product-category/auto-punch-coin-ring-tools/
@timothyjohnson7521 11 ай бұрын
Thank you For your quick reply.
@garypwihongi7333 11 ай бұрын
how can i get please on
@JasonsWorks 11 ай бұрын
Check out www.jasons.works Thanks! j
@maureenbucchin7405 11 ай бұрын
*promo sm* 😡
@Ozarkwild 11 ай бұрын
Jason, have you made any videos of you making a quarter ring? Can’t find any and would love to see your approach to making them.
@JasonsWorks 11 ай бұрын
Good question! I think I have but I should do a new one. They are tricky! Thank you! j
@Ozarkwild 11 ай бұрын
@@JasonsWorks Looking forward to seeing it! I just bought your tools, the ‘whole gamut’. Bought them used, but like new. FAR better than the cheaper dies I was using. That high polish makes a HUGE difference. Nothing gets stuck.
@JasonsWorks 11 ай бұрын
@@Ozarkwild Excellent! Yep, a high polish is the trick! :)
@RockyMountainBear Жыл бұрын
Seriously, it's such a simple idea, but it's ingenious! I just ran out of wire, too. Instead of ordering more wire, I'm getting some draw plates. I like working with 999fs, so I will probably start with some generic silver rounds. I'm legitimately excited about this right now 😅. Thanks again, Jason.
@JasonsWorks 11 ай бұрын
AWESOME!!! The 999 works so easy to work with too. You can punch multiple rings out for wire if your using a big round. Start with the smallest punch you have. Cool!
@RockyMountainBear Жыл бұрын
Thanks for showing this. I've been using silver dimes & quarters to make bezel wire. It's basically a seamless bezel for setting stones like turquoise cabochons. It's just one less soldering joint I have to worry about. I have also used that type of coin flat-wire in my bell handles. Honestly, I'm a little embarrassed to say that it never even crossed my mind to make twisted wire using coins. That's really a great idea. I can't wait to try it out. It will look killer around a coin bezel set cabochon. Thanks for the tips. I really appreciate it.
@JasonsWorks 11 ай бұрын
That is a great idea your doing! Glad you like the twisted wire, it is fun, easy and adds a lot of bling :)
@1ssWotan Жыл бұрын
Thank you for another cool useful video.
@JasonsWorks 11 ай бұрын
My pleasure!
@NdNMoe Жыл бұрын
Awesome
@JasonsWorks Жыл бұрын
Thanks!
@donelings8505 Жыл бұрын
Nice to see you making videos again.
@JasonsWorks Жыл бұрын
Thank you my friend! :)
@colinbrowndiy4135 Жыл бұрын
What is the price of your coin punch Jason
@JasonsWorks 11 ай бұрын
Hello! It depends on the kit that you get. The larger the kit, the greater the savings. Here is a link: jasons.works/product-category/auto-punch-coin-ring-tools/ Thanks! j
@colinbrowndiy4135 11 ай бұрын
@@JasonsWorks sorry I don't have so much money 11.678 rand it is a lot of money
@PatriotCoinRings Жыл бұрын
*"Good tip as usual Jason. What I did with all my dies is I simply powder coated them all whether they were 7, 17, or 25 with a different color for each on the outside of the dies. Of course, you can always spraypaint if you don't have a powder coating setup. But it does help me to very quickly grab the desired angle I need."*
@turkeysandwiche8552 Жыл бұрын
Ty kind sir
@JasonsWorks 11 ай бұрын
My pleasure!
@CoinRingsfromTheMint Жыл бұрын
Good tip and great to hear from you!
@robbuck8703 Жыл бұрын
Really nice job on that coin ring
@JasonsWorks Жыл бұрын
Thank you Rob!
@Coinstojewelry Жыл бұрын
Jason, where can I order the manual that you referred to in this video? It looks pretty interesting. Thank you.
@JasonsWorks Жыл бұрын
Here is a link. Be sure to check out the FAQ page as well. Great info on there. jasons.works/product/how-to-make-coin-rings-training-manual/
@thefishingreel1449 Жыл бұрын
Hi Jason. If been watching Coin ring making for some time now. This video is by far the BEST about How, Why and What? You are really good in explaining things as you do them and as the progress goes on. Thumps up Man, very good Job.
@JasonsWorks Жыл бұрын
Thank you! I hope to get a some more vids out soon.