Should have driven up to Eng.Bluff and flown over the widow Hodgins house for a $6,000,000 + view.
@Tombilicus3 сағат бұрын
that mode switch is just baked, BaKeD, **BAKED!!** WHAT A TOILET BURGER THAT SWITCH IS!!
@plesio28303 сағат бұрын
what's highest altitude you went?
@ssiekmann4 сағат бұрын
Solid video and super-helpful. Appreciate it!
@crashbandicoot4everr8 сағат бұрын
JVC chassis. Same mechanism is used on the HR-S9911U and lots of other models from that era including D-VHS models. And yes, that is the dirtiest mode switch I've ever seen lol.
@dalemettee11478 сағат бұрын
Thanks so much of the info on the mountains. Now what about all of the logs on the shore? I mean there are a lot of them.
@chrisball8648 сағат бұрын
I still have one of these. The bias adjust is invaluable for fine tuning a recording as you go. It makes a huge difference so you can get the playback identical to the source. I used normal TDK AD 90 cassettes and got fantastic results on Dire Straits' Brothers in arms from the CD for my car cassette !! Use the bias adjust knob before you mess with the internal presets.
@bpalpha9 сағат бұрын
As the Onkyo DXC390 is the only new changer available, anyone own this unit who can speak to this machines reliability or playback quality? I'm interested in getting one.
@terry.chootiyaa11 сағат бұрын
*Can anyone advise , I have a Sanyo svhs 1991 midmount. I can't get power in the psu to the secondary side of the board , the primary side shows 230v (u.k) on multimeter It is separated by a transformer, I have replaced mostly all capacitor and diodes that were leaking but it still won't power up* 😢
@crashbandicoot4everr8 сағат бұрын
Switching transistor on the primary side?
@fadhlematrook124811 сағат бұрын
i cant beleve the quality picture for this dron... its best i seen..amazing..thank you
@12voltvids9 сағат бұрын
Its great
@12voltvids9 сағат бұрын
I am more than impressed. This one has a Sony camera on it so that is a pretty good reason that it looks as good as it does. Remember this is is transcoded and recompressed video and then KZbin processed it on top of that. I make make another video to show off the difference in quality between the 3 drones. I did one to compare the Deerc and Holystone I may do one to compare all 3 and put the night shots on from this one because it works great in the dark. One thing for sure I'll be talking this one traveling to get some nice pictures.
@fadhlematrook12488 сағат бұрын
pleas do it
@hscardigan655711 сағат бұрын
Don’t know if someone can help here but i have a sony ccd trv 408e when i play a cassette colors and everything are great but when i go to record it looks really dark. Thanks in advance
@12voltvids9 сағат бұрын
Camera mode give it a smack on the side. If the brightness changes you have a stuck iris on the camera. If not it's probably caps
@Sans_Solo_13 сағат бұрын
Dave your roof could use some "Wet & Forget" cleaner!
@12voltvids9 сағат бұрын
Yes as soon as the rainy season ends ill throw some up there.
@SnepperStepTV13 сағат бұрын
looks like it was nice but got congested with unwanted new neighbors. it got like that on cape cod, nobody even lives in them most of the time. makes an area that used to be special feel significantly less so.
@12voltvids9 сағат бұрын
It is nice. Nobody moves away from here. Tons have been here all their life, me included.
@radio-ged462613 сағат бұрын
Speaking as an ignoramus from across the pond - who owns all that timber washed up on the shore? I guess maybe a logging company? Nice stable pics from the drone BTW and great views.
@12voltvids13 сағат бұрын
Nobody. If you want to salvage you can.
@voenigs61214 сағат бұрын
How does it feel to soon be an American citizen? 😁
@12voltvids14 сағат бұрын
Don't believe a word that comes out if that bafoons mouth.
@terrym106514 сағат бұрын
Nice! Thanks.
@jkmac62514 сағат бұрын
According to the linear tape speed quoted for both NTSC and PAL VHS on Wikipedia that T-200 would be the same length as an E-285 (so not quite as long as the E-300). The PAL E-300 would therefore be a T-210 (10.5 hours in EP). T to E x 0.70135 and to convert E to T x 1.4258
@subdude123415 сағат бұрын
Yea, good timing!!
@richardsmith272115 сағат бұрын
Cool! Now I know what my kite felt like 50 years ago. Location, location, location! Hold on tight to that property. You might even have waterfront property one day with the way things are going. If you ever sell there's going to be another structure built in the place of your house. It's happening all around me. Houses that are way too big for their lots are replacing much more modest mid-century homes.
@12voltvids13 сағат бұрын
My house isn't old. I built it between 2002 and 9, main home built 02 and added on in 09. The old garage is original built in 48. Bought the property in 92
@ssnoc17 сағат бұрын
Amazing that we have already solved all the mechanical annoying issues by going digital, yet we insist on keeping and repairing our mechanical contraptions - why ?
@12voltvids14 сағат бұрын
You will have to ask those fools that keep using this old junk.
@dalemettee114718 сағат бұрын
While on the subject of the mountain chain in the background Dave, what's the name of the mountain way back in the background?
@12voltvids14 сағат бұрын
The range us the cascades and the big one is the volcano Baker.
@banellone19 сағат бұрын
You just showing off that you live on the beach. Joke. Have a nice life!
@12voltvids13 сағат бұрын
I don't live on the beach I live near the beach. The beach houses are very pricey. I bought this property in 92 because the price was right.
@NMY556L19 сағат бұрын
Quality video as usual …. Really enjoyed this! I think you should really consider investing some time in working on your drone skills as it could be a good way for you to get lots of views on KZbin. Given your technical background you could even probably make a bit of income from flying drones as a sideline, especially, now you can fly up-to 25 kilos? Who thinks Dave should spin up a second channel just for drone content (reviews, tests, aerial footage etc.)? Great work!
@12voltvids13 сағат бұрын
My drone skills are fine. This was an evaluation of the drone. The long pauses and back and forth operation was intentional to evaluate how the transition between direction changes is. When I first edited it and uploaded last week I had removed all the stull shots and it was a smooth dissolve between moving shots however due to a bullshit copyright claim that didn't get released and was on hold for 30 days so I went back to change the last song and decided to lengthen the video and leave the evaluation shots in. If you compare to the other one where it tilts every time the direction is changed. I could edit those out and nobody would know. So I figured I would leave the direction changes in to show off exactly how good this one really is. It is absolutely butter smooth. I flew it at different speeds for the same evaluation reasons so when I take this out for commercial shoots I will know what to expect.
@NMY556L12 сағат бұрын
@@12voltvids You've got lots of skills and knowledge which most (including me) can only dream of having. Content is content and you produce a load of it. Editing video takes ages, especially when you have to transcode the raw footage first as your software wont accept it . Hats off for doing all you do. My only experience of media production is in broadcast audio. This was difficult enough, especially when dealing the groups of volunteer reporters on a community radio station where I was a volunteer news producer (and a picky one at that!)
@12voltvids9 сағат бұрын
@NMY556L the transcoding is nothing. I drag the files into wonderful and set the output format and press go. Takes a few hours to convert all the files. Then I just drag to the editor and output. I was originally going to do this as a short video but figured that the trolls would say the drone wasn't as good as their DJI because the stabilization wasn't as good and I covered it up by editing. So I went back and put the static shots and the start and end of motion, and direction changes ect in to show that it does stack up well against a dji. Do dji make great drones? Yes they do and you pay the price. A dji for example has a screen that shows you the video. And has things like front collision avoidance. You pay the price. Does it have a better picture? The pro might but I would have to convert anyway so any quality gains would be lost. If you are shooting for television or movies and the director requires 10 bit video that might me an issue but if the budget is that high you are using a large drone carrying a large professional camera anyway. This one is bigger then the toy drones, flys higher (if you allow it) and produces rock steady images, and the moves are butter smooth. At a cost of about half a dji but then again you don't get a screen. You have to use the screen you cary in your pocket (phone)
@NMY556L8 сағат бұрын
@12voltvids great stuff. Whatever you do, someone will have something negative to say ... ignore them and keep making your content your way. If someone thinks they can do better, then good for them. You can only work with the skills, tools, and budget that you have.
@Bluethunderboom21 сағат бұрын
What are you going to do with your current printer since you replace with freebee printer?
@12voltvids20 сағат бұрын
Fix the jamming issue.
@SurvivalSquirrel21 сағат бұрын
Where are the mansions?
@12voltvids20 сағат бұрын
Thats the joke. They are all multi million here. A bare lot will set you back over a million and those new homes minimum 2, on the beach 4m minimum. Even my place would go for about 2 if I were to sell. Its a very expensive area.
@SurvivalSquirrel17 сағат бұрын
@@12voltvids Damn, i would probably sell and move somewhere else. Buy a new home for 1, and have fun with the other million!
@b.powell348022 сағат бұрын
Great video, Dave !, you definitely live in a very nice area of Canada!, unfortunately, here in Southern California, the mansions are all burned out rubble from the fires and strong winds in Los Angeles!, fortunately, I live over 80 miles away from the fire ares, and my community is very nice, mostly rural and some farmland!
@12voltvids22 сағат бұрын
Yes i saw this on the news. Have had bad fires here too. Town of Lytton burned to the ground a few years ago and jasper Alberta had a major one last year. Haven't put the footage I shot back in September when I drove through yet.
@speed_rider36215 сағат бұрын
@@12voltvids I would argue that any uncontrolled fire in a municipality area is bad. Everything is mostly dry, streets are usually narrow, so the flame jumps from one area to another very easily. A few days ago someone accidentally toppled a gas heating lamp in the restaurant in Most (town in north-west Bohemia). A small-area intense fire, six dead, nore probably to come (I hope not).
@CP-fm7zy23 сағат бұрын
Took a few minutes to figure out what golf course that is. One of the few in the GVRD that I have not played (cuz it's private). Been to the beach/bay many times tho of course.
@12voltvids23 сағат бұрын
That's right. Pull out your cheque book. 100k to join.
@spacewolfjr22 сағат бұрын
@@CP-fm7zy they make you wear pants there too
@shaunrichards74423 сағат бұрын
Wow, the moment your Drone lifted off the view from the shore to those white peak mountains in the distance took my breath away. Yes definitely a millionaire Paradise. Some of those mansions look impressive. Enjoy your droning. 😊😊😊😊😊
@12voltvids23 сағат бұрын
Thats Mt Baker in Washington
@SergZak202323 сағат бұрын
The theme song you used (especially the very beginning on launch) reminds me of the theme for the “Soarin’ Over California” attraction at Disney California Adventure here nearby me in SoCal. Well done, Dave!
@12voltvids23 сағат бұрын
Its all by jack waldenmaier, musicbakery.com. Royalty free. First track is called "Flying High" probably not something I would recommend. I wouldn't recommend driving high either. Not that I would know anything about that. That track very well could be the same as it's a production track and they could have licensed it.
@RagedContinuum13 сағат бұрын
@@12voltvids title of the last track?
@spacewolfjrКүн бұрын
You'd have a million thanks for creating that kitty cat review video!
@12voltvids23 сағат бұрын
I'd rather have a million dollars.
@stpworldКүн бұрын
Do these need a license I have just a small drone for now?
@douglashoff95Күн бұрын
In the US any above 250 grams require a license with the FAA.
@12voltvidsКүн бұрын
This one does and I have it. Had to write an exam before I could fly. This is 600 grams so it's still considered a small drone but over the 249 gram limit. I have 2 micro drones too but this one shoots a superior picture and it is just so smooth. The moves I was putting it through was to test the stability in moves, turns lateral moves, ascending descending ect.the
@12voltvids23 сағат бұрын
Same rules here. 250 grams to 25KG requires registration with Nav Canada and a remote aircraft pilots license. Registration and the license costs 15 bucks for the entry level license exam. Have to have the reg number on the drone.
@terrylockwood917621 сағат бұрын
It's not a license in the US. If it's above 250, it has to be registered with the FAA. And it also has to have RID, either built in or an RID module added. I'm sure there are other regulations on the way.
@12voltvids20 сағат бұрын
@terrylockwood9176 same here. Rid module is built in and I had to register it but in addition nav/transport canada requires every person that operates a drone 250 grams to 25KG to pass a written exam to show competence in the regulations regarding operation. The penalties for flying in restricted airspace can be substantial. For example flying anywhere near where there are wildfires and firefighting aircraft are working can trigger a massive fine. This is to prevent what happened in LA where someone flew a drone and hit a water bomber damaging the wing. Its stunts like that, that lead to regulation tightening and enforcement.
@Jonnn21Күн бұрын
@12voltvids I have the RD25 and the issue im having is the motor turns on immediatly with the power button. Also the play mechinish comes into place thenn after a second it returns and stops. Thoughts?
@markmarkofkane8167Күн бұрын
Anyone with money to burn could buy it. Maybe they already did.
@BenjaminCenan-wc7gpКүн бұрын
I got a quick question about my jvc vr-503a so when I turn it on it work then I tried to put a tape in and it used to take the tape in fully then it tired to play the tape then it shuts off and it also shuts off when I try to eject the tape and the timer light keeps blinking red how can I fix it
@BluethunderboomКүн бұрын
I like this printer at 4:34 timeline, I have the basic laserjet printer made by the same company including HL-L2340DW, and nobody in the warehouse want anything to do with it, I can use something to print signs, calendars (from Calendar Creator Plus from 1992), tags, instruction manuals, schematics, coloring pages, and quotations. on the other hand, I got two other laserjet printers including HP P1006 and P1102w, and it prints okay. Plus I have HP Laserjet Pro MFP M426f-M427f PCL 6, it prints so quick and it prints just fine.
@JesselovespinballКүн бұрын
Please keep putting Donald in his place . I can’t fricken stand him and have never voted for him once . I still can’t understand by have the people in my country are so utterly stupid . Anyways , love the videos ! Really been enjoying them !
@12voltvidsКүн бұрын
I couldn't have said it better myself. You took the words right out of my mouth.
@12voltvids9 сағат бұрын
Trump is a post turtle. "You know he didn't get up there by himself, he doesn't belong up there, he doesn't know what to do while he's up there, he's elevated beyond his ability to function, and you just wonder what kind of dumb ass put him up there to begin with
@ssnocКүн бұрын
Watching these fix-it videos and seeing the condition of the things, makes you realize how filthy and disgusting most people are.
@750kv8Күн бұрын
Guess I can consider myself lucky that I've never fell victim to a booby trap in any VCR that I took apart (only 3). It's hard for me to imagine any nice looking place that you look at and say, hmm, it'd be nice to live there innit? And be affordable. Yeah, in my sweetest dreams. This is Planet Earth, go figure.
@SamuelWilsonjr-u7gКүн бұрын
Hi
@clisthanlerКүн бұрын
Your videos are the best and have helped me a couple times now. My Casio DA-R100 had the same audio issue, replaced the caps and is working perfectly now. Thanks. By the way, you can snake that PCB board out without removing all the covers, at least mine came out easily. Remove the screws, pop the front connector by levering the front edge and then lift the side opposite the optical connector and it will lift out. Thanks again.
@bpalphaКүн бұрын
Bought this exact model from eBay. Always wanted a piece of Sony ES gear. Arrived damaged from shipping. 😔 Spent all of 2024 looking for a good CD player and came up with nothing.
@thomasisrael673Күн бұрын
I almost got to the motor on my heater. What stopped me was a clip on the front of the fan. You had a nut to remove. I'm just afraid if I remove the clip, I may bend it out of its current position. I did clean the fan as well as I could, but there is still a loud screaching sound when the heater is turned on. Ima break it down again and remove the clip and attempt to do what you did. Thanks for the content!!
@gregtraut3827Күн бұрын
Am I able to put the turntable right into that and the other two to the receiver not using the tape monitor?
@chominhho8528Күн бұрын
I have this TV , ( LG 42Ln 5300) the power red light on , but the screen is dark , Please show me how to fix it , I see some technician fix the other LG TV different serial number by tape, but the connecter of LG 42Ln5300 not same the connecter of the LG TV that they fix .
@MrJuanjncКүн бұрын
Thank you so much, I just fixed my DTC-790 that was having this "caution" message for a while now. This is a purchase I made in 1996, it always worked like a charm until I left it unused for a couple of years. I spent some time last year trying to fix it following your advices on the 790 videos with no luck (cleaning the switches). I haven't been able to throw it away anyway. So I decided to make another attempt yesterday and finally found this video which gave me the solution, beside loading issues (some bushing had went away from a lever) this black gear was in same situation than yours. Is there any way to get replacement bushing, I have one missing ? Let the music play (again).
@bobkatz9021Күн бұрын
Where did you buy this gear? On eBay?
@12voltvidsКүн бұрын
Kpcomponents.co
@thcouraКүн бұрын
What is the name of the song in the intro?
@SniffaWhiffaКүн бұрын
Great video! I have this exact model and feel like mechanically everything seems to be working. The tape I have used seems to have been recorded at a different IPS. The playback and recording sound like chipmunks. I wonder if it's just a matter of getting the proper formatted tapes or do you think there might be a mechanical issue with my tape deck?
@12voltvidsКүн бұрын
This deck has 7.5 and 15ips. Your tape probably recorded at 3.75.
@SniffaWhiffaКүн бұрын
I’ll get some new 7.5 IPS tapes and test. Thanks!
@jkmac625Күн бұрын
It's probably made by JVC. I bought a Philips VR1000 back in 1999/2000 which is a SuperVHS recorder with the built in TBC and it's basically the same as the JVC HR-S7600. I think they also made a VR1100 which added the SuperVHS-ET mode so that's probably the same as the JVC HR-S7700.