Good and clear explanation of a trickey job made easy. Thanks, great help.
@paulvale336524 күн бұрын
There not pads they are brake blocks pads are on disc brakes
@julielemke9157Ай бұрын
I’ve never done anything with my bike but ride- my front brake wasn’t working- your video helped me fix it- your views and explanations are awesome!! I THANK YOU!!!
@danehardinge8801Ай бұрын
my schtrader inners all have long stems and retaining nuts just like that presta.
@DCford-eu4nmАй бұрын
I don’t recommend doing it to narrow rims . But I’m doing it if the rim allows it to be done , so lame presta .
@fleadoggreen90622 ай бұрын
Thanks I bought the wrong liner I bought it for the spoke screws popped my inner tube 😊 I’ll try it anyway 😊
@DealWithTheDevil.2 ай бұрын
Was wondering why my headset feel so stiff, had to overhaul it AGAIN. Guess what? my dumbass previously put the bearings upside down. Thanks man❤
@SeymourSunshine2 ай бұрын
The other HUGE advantage of the Schrader valve is that it's easy to put Slime (or some other sealant) into the tube. I haven't had a ride spoilt by a puncture in over 8 years!
@stevespanos753 ай бұрын
You have simplified what I thought would be a gruesome task. Beautiful job. This video helps me a lot. Thanks for your effort.
@henryfredette67353 ай бұрын
Thank you! Lost the instructions and hadn't used the light in a while.
@martyleland72683 ай бұрын
Sorry to sound like a broken record, but... Man! This video is like a breath of fresh air. By far the most thorough, well explained, no B.S. video I have ever seen. You saved me from an S-load of frustration I got from being in the dark about many of the details you plainly laid out. Thank you, sir!
@drek2263 ай бұрын
I went to your blog to read the updates. Thanks this is very helpful.
@AirborneUSA4 ай бұрын
I found one of these on the road and the light has lasted for weeks and weeks and I have not been able to figure out how to open this thing until now 😊 (Edited) Oh no there's no button to push it's been broken off...but I got it! 😜
@sf49erswarriorsgiantsgumba994 ай бұрын
Cheap components, cheap bike = cheap customer!!!😂😂😂
@patrikfloding79854 ай бұрын
Any concerns about weakening the rim?
@lycroz_120hz4 ай бұрын
my adjustable just keep sliping and i keep broking the free wheel tool im on my third one plz someone help me 😭
@stevewill94954 ай бұрын
Thank you, I just got a used cruiser for $10 and this video will come in handy.
@Michael-eo5nf5 ай бұрын
What if your key won't go all the way into the lock that's my problem I haven't tried to take the battery out for 3 years and something happened to the lock
@timmoen45895 ай бұрын
thank you!! I bought a new bike 2 years ago, and rode it 15 miles. The next spring I went to ride it and the tires were flat. That was a year ago and I still can't put air in it.
@samsonabraha95365 ай бұрын
Great lessen Bro !Thank you .
@geraldbull92727 ай бұрын
Nicely presented, no annoying music.
@hellocalgary40477 ай бұрын
Both cage bearings were installed in the wrong direction
@40redman7 ай бұрын
Great tutorial! One suggestion is to adjust the point of front brake lockup as close to the handlebar as you can keeping in mind the individual that will be riding it. Do NOT lockup the brakes too early as that will send you over the top of the handlebars quicker than you can blink an eye!
@chadhaynes31717 ай бұрын
😎👍🏽 I'm sorry to say this but the thing is showing on the video is about useless how much type of guy that uses his bicycle pretty much to go everywhere he needs to go it's best to get a 8802 with the green gel stuff in it or if you're like me you get a lot of flat tires because the inner tube tire either dries out or you run something over and it pops it for the third thing and you may be a tad bit heavy and you're trying to drop some weight cuz the tire can only carry your weight for so long so the heavier you are it will wear it out a lot quicker if you are about 2:40 or below and you have a 26 inch tire you should be good cuz they can carry about 240 I might recommend dropping some weight though down to about 2:30 or below it will extend the life of your inner tube after you avoid everything that can pop they should last about 1 to 2 years you could use saddle soap to help keep your inner tube from popping easily but it's just a pain in the ass to do it but it might be worth it but if you want to go completely pop list tires might I recommend stop a flat inner tube tire whatever size you need it's just going to keep the tire from going flat but you have to change the outer tire every 3 to 4 months or when it wears out use the metal levers to help get it off when you put it on cuz it's going to be more different
@Mikezulka8 ай бұрын
Yo this light is cool I got it 6yrs ago and it is still awesome 👏
@livinlarge12479 ай бұрын
Yes those presta valves suck. Just walked my bike home. The adapter I had worked poorly, and who knows if the presta might have been broken or what, but I will drill that sucker like my others.
@wyattsdad85619 ай бұрын
What if you ain’t got that tool? 😃
@miketwiddy845510 ай бұрын
In the beginning of the instruct video, Just for shits and giggles, twist your hand around and show the other side of the tool.
@richardnoyes41210 ай бұрын
I had the same problem, but I think I used all the swears words instead of you , super patient great advice in removing stems and keeping cool.
@Brian-jz1pi11 ай бұрын
You should have showed what attaches into the spline so I can make my own step spending money looks like I just use oversized nut thanks but I don't spend money on a tool I'll use half a dozen times to just have someone steal it.
@thinkjon11 ай бұрын
Thanks for the video, I was able to find the correct Freewheel Removal Tool - appreciate the help! One problem, the sprocket was NOT moving. Notice in the video how LARGE the wrench is, it's more than radius of the rim. If you don't have a wrench of this size, you NEED leverage to remove the stuck sprocket. Check out this other video on how to release a STUCK sprocket. kzbin.info/www/bejne/gYemgJ2Qadx2naMsi=qr52-mun6Q5Ur3m4
@mrkeopele Жыл бұрын
thank you, i'm working on Pesu Monster which has dead battery and no charger, so want to take it off and open it up for troubleshooting and needed a quik refresher for the technique, thank you
@mikey9999 Жыл бұрын
Thanks for your video - 8mm drill bit and a round file worked fine...cheers
@SynteconlineAuSupplements Жыл бұрын
Yes, you could spend thousands of dollars on an eBike kzbin.infoUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ and get something much higher quality. However, if you're looking for a basic model to try out eBiking this is a great choice. The assembly is easy as far as bikes go (took about an hour for me to do, I'm not an expert). All tools needed are included. I added the plastic mud guards you see and a more comfortable seat. The other reviews are correct that you're probably going to want a better seat (Giddy Up! Bike Seat is what I got - super comfortable). The battery easily handles a 2-4 hour ride if you add some of your own pedal power. I haven't even gotten it up to top speed yet - it is very fast. Components are not top of the line, but decent for the price and work just fine. It works great on dirt roads and singletrack and pavement although too heavy to do tricks or any serious technical mountain biking. I'm looking forward to using it a lot over the summer. Tons of fun!
@kimchan2108 Жыл бұрын
Sturdy, well-built, amazing
@andresfeliperamosromero3060 Жыл бұрын
Great bike , rides smooth kzbin.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L I added a bigger spring loaded seat to it . Takes a bit of adjusting cables to get brakes and shifting to perfect . I've owned quite a few bikes in the past that were absolutely uncomfortable to ride and they always ended up as garage wall decor . I'm not seeing that with this one. It's pretty light I've only ridden it a few miles but I like it . As for the pedals falling off in the other reviews , the pedal arms are aluminum along with the pedal studs look to be also . I would not overtighten them. I can see it would be very easy to overtighten them and strip the threads right off . All in all I think it's pretty good quality besides the aluminum pedal thing .
@DeanWright-gj2nm Жыл бұрын
It went together easily in less than an hour. kzbin.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
@granadosable Жыл бұрын
Very good demonstration.
@chrischeehan2423 Жыл бұрын
All of your videos are very informative and clear! Thanks for having this channel. I have only one suggestion on this wise conversion. When drilling out the valve hole, step the bits instead of drilling the hole out to the correct size with one pass. That will prevent any elongation of the hole, and allow 2 wall rims to self guide the bit
@specialized29er86 Жыл бұрын
Thanks for the how to, I'm old school and prefer the schrader valves when using the thorn resistance tubes.
@kurtneuert6289 Жыл бұрын
Great video! Just wondering how narrow of a rim can you do this to, without compromising the strength of it? I'm considering converting to schrader on a 21mm rim. Thanks
@jaysmith5105 Жыл бұрын
i feel like I grew up in an alternate universe in America, I hate the presta valve, Im joe blow, I just want to ride my bike. stop at the gas station to fill the tires in an emergency , or w/ air compressor at my house. so annoying. more difficult than needs to be. messing around with the pump, its so dumb, so froggy
@Jeff-zc6rr Жыл бұрын
thakns for showing me the right way to turn. I was turning it the wrong way. Also i was only trying to use that chain grip thing. forgot you had to put that special screw/nut thing in.
@godschild5587 Жыл бұрын
I hate presta valve, its pain and mess to pump the green slime in presta tube, i converted my presta wheel to schrader, i wonder why there is presta valve when schrader valve works on skinny rims?