Dig_It_Starnes

Пікірлер

@rueban96 2 күн бұрын

Looks like the cheap one might have more stamped metal parts. Lighter gage steel?

@gregherman2316 3 күн бұрын

Good video. I’ve been checking out the Sany. Good to see the sunward review. Do your undercarriage a favor. Clean it out before it causes damage on your drives sprockets

@charmnGUY 5 күн бұрын

We have an import one, works fine for small jobs, for a fraction of the price...around 7k

@reciu795 5 күн бұрын

8k$ for this? i bought this for 3k$ plus 1k$ with shipping but 1,2T

@weeweed86 6 күн бұрын

What's a ground rough....?

@missouribigbasshunters4461 9 күн бұрын

Would you ever buy one of their larger machines?

@dig_it_starnes5222 9 күн бұрын

I’ve spent about 100 hours on the 155 and I liked it. Especially for the price. I would really like to get their 210 Machine. Little over 50,000 pounds, would be perfect for the dirt pit and land clearing jobs

@donaldblank8873 9 күн бұрын

Grow plugs have to heat up first. Watch a short video on deso engines.

@JackofHaulTrades 9 күн бұрын

I got the Wacker Neuson SM100 powered by a 24.7 horsepower Yanmar diesel engine, and it blew the headgasket and warped the heads at 180h ... it got covered under dealer warranty thankfully

@dig_it_starnes5222 9 күн бұрын

That’s wild! Glad it was all covered. I have a 333G with over 3,000 hours on the yanmar engine. No actual mechanical failures. Just some bs stuff like coolant tank and turbo boot

@JackofHaulTrades 9 күн бұрын

@dig_it_starnes5222 The dealer said whoever assembled it did a bad job...

@JustinWallace-k8m 9 күн бұрын

I have the swe-35u. Awesome machine for the price!

@bogtrotter5110 10 күн бұрын

Your arse is farther back on the cheaper machine so more counterweight than the Yanmar.

@JohnnyThrobber 10 күн бұрын

LOVE your videos my friend. Did you ever do a part 2 to this one? Maybe I'm just not finding it? Thank you!

@allenbreedlove8906 11 күн бұрын

Three decent sized trees with stumps and you were swinging them , it also seemed like it was going to pick all three up but dropped one … That was impressive 🤷🏻… I mean I don’t see anything wrong with it …

@torkelsenhus 11 күн бұрын

Sunward is a known brand. This must be quality.

@technicalitems731 11 күн бұрын

I want one. I think I'd take a chance on it over more expensive popular brands. These are a big brand machine overseas like Shantui, Sany, XCMG, and more. Open source parts. I like that

@dig_it_starnes5222 11 күн бұрын

Once you get your hands on a “Chinese” machine. You’ll see how many parts are the exact same even on big brands. Just without logo stamped on them. Reality of the matter is most American brand machines are made mostly overseas. If you can get the same quality of service and reliability it’s hard for a small business to spend the extra 30-50% just to have a name. I wish things weren’t that way. It’s all about profits and the shareholders. In all reality no equipment brand truly cares about the consumer, as long as they are buying something because they don’t have a choice

@technicalitems731 11 күн бұрын

@@dig_it_starnes5222 damn. What a good way to put it. I agree. No one is coming to save us. The very people who are doing this to us get bailed out while they set it up this way and prey on our brand identities and false patriotism. I own lots of cat and deere etc... and the damn stuff is made all over the world. And they are usually a$$h0les who don't care about service or loyalty. We have to play the game back to these fckrs. Go around the diversion and get smart. It's like Harbor Freight...it gets the job done. I've heard people say..."a man is only good as his tools"...or..."buy once cry once". It's a mental limitation. I have a friend who will not be seen on any motorcycle except for a Harley. I ride whatever I have or can afford at the time. I buy different brands and have fun trying them all. I told him..."while you are complaining that you aren't getting to ride I'm riding...my Honda". It's a limited mind scenario. It's like a roof leak. Sometimes you need to throw a tarp over it so you can make it to payday. Sometimes it's like buying furniture at various name brand stores...you may want French antiques...Bed Bath and Beyond...or Badcock.......sometimes Badcock is better than no cock at all!

@RamminRanch 11 күн бұрын

Why the hell are we bucket popping???

@dig_it_starnes5222 11 күн бұрын

To piss old white people off

@dig_it_starnes5222 11 күн бұрын

Sorry it’s been so long! Been trying to keep work flowing and get settled into the new property. The business and my various responsibilities always come firstbefore I’m able to do things like this. As we get into a more stable situation this season I hope to put out a new video once a week. I aim to make more frequent, and better quality videos as the weeks go on and incorporate as much cool stuff as I can. Make sure to follow along!

@yourmomlikesit1072 11 күн бұрын

I love it when they say china off brand 😂 Everything we use comes from china or a different country I’ll save the money and go with the Chinese brand

@jwsl728 11 күн бұрын

you guys do not know the chinese brands. these are the worst brand in china. just because 1 franch old man bought it so that this brand is famous now and all the people go buy this junk

@user-mw2ky8qq7g 11 күн бұрын

The cheaper one is missing ROPS, was it removed?

@mnblkjh6757 13 күн бұрын

😂🤣

@americanrealitytoday 14 күн бұрын

The argument cheap vs. expensive in bringing up China is nonsensical, because (unfortunately) all primary material sources, components, engines are already made there.

@Limitless_Obsession 15 күн бұрын

These little machines are not TOYS! I have a 1 ton mini from China for my 1 acre property and it never let's me down...changed my entire property and saved tens of thousands just buying the excavator instead of hiring a company to do the work!

@shaunnemeth2491 16 күн бұрын

Most concerning to me about Chinese equipment is you’re one component away from owning a boat anchor. After sales support is crucial .

@MrCheaterpipe 12 күн бұрын

All name brand components just lower end for a quarter the price it's a hydraulic pump 3 hydraulic motors and 5 hydraulic cylinders not much else to go wrong

@cody8064 21 күн бұрын

How often do you use the 3 ton machine

@cody8064 21 күн бұрын

How often do you use that mini ex

@michaelcloster6199 22 күн бұрын

You’re going to feel like you have riding a bronco bucking bull after operating this machine all day ( Chinese) see the way the rear of machine lifts when under load and lifting it bangs back down just observe the guy operating machine see how he bounces around I’ve had small machines trust me if they bounce you around all day while you’re working them you’re going to need a good chiropractor

@vicosee4439 23 күн бұрын

The good thing is you can go to harbor freight and pickup an engine for 200 and pop it on there id buy the Chinese

@gunnerranch 23 күн бұрын

Awesome. Waiting for the video :)

@paulbruto4897 23 күн бұрын

Any machine is better than a shovel in my books like you said 8 hours on digging to 3 hours i know what's best in that situation at my age

@go5582 28 күн бұрын

hi handsome, great channel and product review. could you please add the "machine to human work formula " to every video? that make your channel unique. also could you upgrade your microphone to a rohd . ( its a black box) i would like to hear your natural voice. thanks

@dehumm9619 Ай бұрын

No roll over protection..non starter

@knottyswamppine Ай бұрын

You might want to tuck that boom in

@thecrippledone3325 Ай бұрын

It ain't gonna hold any water bro trust me,I build ponds for a living,I'm an expert 💩

@tarancehill651 Ай бұрын

IS THERE CLAY?!?!

@CorkyMak Ай бұрын

Absolutely no one tagged him about this either he just wanted to give his expert unprofessional opinion.

@dig_it_starnes5222 Ай бұрын

I got tagged in the video several times and multiple people sent it to me. You do realize this took place over 2 years ago?

@incognito2461 Ай бұрын

You’re a clown 🤡 “Nate’s pond won’t hold”

@Influencial_ross Ай бұрын

Hey buddy how that cheap escavator doing to date

@ericbraun4652 Ай бұрын

Is the canopy designed as a rollover protection system? That would be great! that's a missing feature that makes me hesitate. I thought it would just crush. The Yanmar's roll bar looks like a proper rollover system.

@Gangstercub Ай бұрын

What a bonehead

@Memnoch451 Ай бұрын

" Are you thinking what I'm thinking?" Hold my beer!

@Uriah625 Ай бұрын

I have a Struck and I love it. The best part that few people talk about is they are extremely easy to maintain. Unlike most manufacturers, there are no proprietary parts to these things. Most wear items can be obtained at the local tractor store, auto store, or online. There is no special Struck hydraulic fluid or filter, there are no special Struck hydraulic lines, there is no special Struck anything. So even though they may seem “just as expensive” at first, you aren’t owned by Struck after purchase. Second thing that should be mentioned. Their customer service is unbelievably good. If you actually do order parts from them, you are talking to someone in Wisconsin. Then if you have a question they will patch you over to a person that actually builds the things. I own a Kubota tractor and a Struck mini dozer. They each have their own benefits and drawbacks.

@1cryinprofit Ай бұрын

It's not a windshield wiper its a body squeegee to help keep the cab clean

@KeithDeley Ай бұрын

Whats that in tonnes , Americans alwas use pounds ridiculous

@tristenpreston6443 Ай бұрын

For the price of that, you could get a mini ex and a mini skid.

@erikev Ай бұрын

One leaked hydraulic oil due to poor craftmanship. the other did not leak oil. Take this into consideration also

@richardschaffling9882 Ай бұрын

I did that by hand with my tractor and brush hog 20 years ago and now I wish I had one of them it took me months

@privateprivate5928 Ай бұрын

Undercarriage is half the size. Tracks dont stay on. Inadequate review.

@holland3g1 Ай бұрын

Appreciate the video, great info. Hopefully can get a phone with HD recording soon!

@radamson1 Ай бұрын

I wonder if it was cross-threaded!

@richardmauch1042 Ай бұрын

Here me out here, if size and weight was exact I think china would have kept up with those test. Now as far as the pull test, the tread on china was running backwards. I almost wonder if it would have done it or broke. Lol

@brentclingman5428 2 ай бұрын

What a dumb shit, you don't beat on your tools.

Ең жақсы KZbin

Пікірлер