Thank you so much! I will do the same when my headlamp arrived. And I will replace the OEM clutch spring to a soft one I bought from a spring factory directly.
@ilyamuromec28672 күн бұрын
Just did it? With 3 full turns didn’t have to adjust the sensor nut Also changed to softer spring that was a lot harder than the pedal adjustment So much easier to drive day and night Very happy
@Pharaoh_The_Great3 күн бұрын
I like the previous gen more
@ShayHarambe3 күн бұрын
I can see that. I felt the same way for a while. Just like the S550 mustang. I hated it then like 2 years later I bought one lol.
@adalbertolima34915 күн бұрын
If this car had a nicer LED head unit this car would be an instant buy for me, idc about the little trunk handles, I just want a nice screen and driving experience
@yuzar39745 күн бұрын
whats that guage on the left side?
@ShayHarambe5 күн бұрын
P3V3 gauge
@marklinley8155 күн бұрын
If you’re doing the build, post up a good DIY on the process of removing the tranny, installing the new components, and installation. 😊 Congratulations on becoming sponsored by them.
@ShayHarambe5 күн бұрын
Imma be filming all of it that way yall can install it at home. Easily gonna be a 30-45 min long video. Thank you! I am very excited and thankful for it all.
@marklinley8155 күн бұрын
@@ShayHarambe thanks for replying!!! I will be waiting for it. 😀
@automotiveandmore5 күн бұрын
I would love to see the test with the piece trimmed. Without that piece, all the ram air goes into the hood instead of directed down. To the intake duct.
@ShayHarambe5 күн бұрын
I do agree. The only reason I didn’t is because so many people on Facebook or the forums asked just by removing. Not necessarily cutting that piece. However I do agree. Cutting some of that off to direct air down sounds more effective. Also what comes to mind though is the radiator support below. With the factory radiator support it could be blowing this air out the support. Really whatever air is stronger. Or the air coming up into the grill could be stronger and prevent the air from coming in. 🤷♂️ lots of variables. I am curious about the stillen duct though. I wish there was a more effective ram air duct for this truck. I made on for my Supra. I feel as if the stillen duct is still kinda inefficient. It’s not really supply air in a ram air like way. Just kinda putting it in that cavity and waiting for the turbo to take it. Where as if there was more of a ram air forcing cool air into the box that would be way more efficient. I’m obsessed with IATs. I’ll figure something out. 😂
@automotiveandmore5 күн бұрын
@ShayHarambe I'm running the Stillen scoop and I removed the AGS slats blocking airflow to it. I will confirm that I do see Ambient Air temps all time unless the truck adles for a few minutes. I'm in FL, so keeping IAT low is crucial.
@ShayHarambe5 күн бұрын
@@automotiveandmore yeah I’m in Florida too! I definitely want to pick that up and try it out. I really wanna get the S&B filter and find a way to bring in cold air into that other port to. People say to keep it closed but it’s there so I wanna use it.
@jimmyy_s33875 күн бұрын
Awesome stuff congrats on the sponsorship
@ShayHarambe5 күн бұрын
Thank you! I feel super honored 😅 something as big as this it’s amazing.
@ShayHarambe5 күн бұрын
Interchill the duramax? 👀🤔
@sabr1596 күн бұрын
do you know the rating for it in terms of hp/tq I had emailed spool but no response
@ShayHarambe6 күн бұрын
1000 pounds of torque to the wheels. Horsepower you’re not really worried about.
@mkvsanh6 күн бұрын
I forgot the company but there’s one that sells a light battery but it’s so expensive but it is super light compared to our factory one. also this video is goated, a new battery in these cars cost an arm and a leg if you go to the dealership just for coding
@ShayHarambe6 күн бұрын
I know anti gravity makes one but it’s over 1k. 😮💨 ain’t no way. I’ve read most dealers don’t even know how to do it to.
@SIRICKO6 күн бұрын
bmw and that's not A catch can my boy that's A breather can.
@ShayHarambe6 күн бұрын
That’s funny. KLM the people who made it called it a catch can my boy. 🤷♂️ fight that battle with them.
@philb67956 күн бұрын
love my powertex man. weight savings is crazy
@ShayHarambe6 күн бұрын
The weight savings is wild!
@starbai4106 күн бұрын
Any info on Braille batteries? I’ve considered using theirs.
@ShayHarambe6 күн бұрын
I haven’t heard anything on those. I’ve only heard of this brand and the anti gravity. 🤷♂️
@starbai4106 күн бұрын
@@ShayHarambe ok 👌
@MrInvisible2you6 күн бұрын
Please never delete these videos! when the times come for my battery to die i can use this as reference. You the only one doing the real content that no ones doing for this platform
@ShayHarambe6 күн бұрын
😂 I don’t plan on it! Not gonna lie though, I wish my videos got more popularity. Instead those who post click baiting titles with half naked girls on their thumbnails get all the views. 🤷♂️ I’m here for the people though 🤗
@SUPZLLAmkvSUPRA6 күн бұрын
Do you have to use BimmerCode & bimmer link to finish setup? I only run my universal WiFi adapter w/MHD tuning
@ShayHarambe6 күн бұрын
I don’t believe so. When I clicked register new battery on BimmerLink it told me to go to bimmercode to register. So I registered it on bimmercode however used BimmerLink to verify and check the health of the battery. Yeah the MHD adapter is what I used so your good.
@SUPZLLAmkvSUPRA6 күн бұрын
@@ShayHarambe so you have register new battery for car to start up?
@ShayHarambe6 күн бұрын
@@SUPZLLAmkvSUPRA no however it’s highly recommended. You’ll kill your battery faster if you don’t. Plus I’ve read some people get engine codes if you don’t.
@ShayHarambe6 күн бұрын
How much yall think the Supra weights now? Between carbon hood, carbon fenders, lightweight battery and titanium exhaust. 🤔
@chrisginoc6 күн бұрын
Lipo battery + light exhaust would make for a much lighter MKV.
@ShayHarambe6 күн бұрын
I’m curious what it weights now. Between all the mods and weight reducing things it’s gotta be lighter than factory. I only say that cause the turbo kit and radials/tires gotta weight more than factory stuff.
@xxthehuskycaboosexx6 күн бұрын
Big W.
@xxthehuskycaboosexx6 күн бұрын
Funnily enough, I just found their trans, but there’s no info on it lmao. The price of the Trans is fantastic, hopefully it brings prices down on these damn built transmissions.
@ShayHarambe6 күн бұрын
Yeah they just started putting them out to the public a few weeks ago. So not a whole lot of info out there yet on them. I’m confident in these transmissions though. They have been testing them on their personal cars for quite some time. I do believe it will. Between Spool and ATS I bet Pure will drop there price.
@ShayHarambe7 күн бұрын
Links for everything I mentioned in the video are in the description. They are affiliate links so if you use the link you’re helping the channel. 🫶
@blainehoopes88957 күн бұрын
Also look at AMP steps for your side steps.
@ShayHarambe7 күн бұрын
Yeah imma have to change them eventually. I like them but ehh I need something different.
@blainehoopes88957 күн бұрын
Love it dude. For the wheels go with a 0 offset and they will fit exactly what you’re looking for. A 17 on a 35 will be 👌🏼👌🏼.
@ShayHarambe7 күн бұрын
Yes sirrrr! I just don’t know what color. Black always looks good but everyone does black wheels. Maybe charcoal or something.
@blainehoopes88957 күн бұрын
I sent in my recommendation via Facebook. 10/10 would recommend
@ShayHarambe7 күн бұрын
What yall think? GR86 or AT4 Duramax? 👀
@Viper3000000000000008 күн бұрын
Bro you need to seriously stop bitching its an amazing car
@ShayHarambe8 күн бұрын
😂 someone is a little sensitive to someone else’s opinion
@SUPZLLAmkvSUPRA8 күн бұрын
Can you share what battery brand & name you ended up getting & from where?
@ShayHarambe8 күн бұрын
amzn.to/4ffoeB3 I ended up ordering this one. I should have it tomorrow so I’ll give updates and compare and what not,
@SUPZLLAmkvSUPRA8 күн бұрын
@@ShayHarambe that’s more$ than oem battery from bmw I believe theirs is 400$
@ShayHarambe8 күн бұрын
@@SUPZLLAmkvSUPRA AGM batteries are trash though.
@SUPZLLAmkvSUPRA8 күн бұрын
@@ShayHarambe yea do a review once installed pls thanks
@bearclaw51159 күн бұрын
Why doesn't my cheap sportscar have the same goodies as my higher-end sportscar? I don't quite understand it!
@ShayHarambe9 күн бұрын
😂😂😂 a Nissan Altima has these things. Understand that?
@user-ki8zf1rp1e9 күн бұрын
Dude, you documenting this DIY kit is a blessing. Even though I don't have a Supra or B58 I appreciate how in-depth you go with your projects.
@ShayHarambe9 күн бұрын
Thank you! That is what I strive for. With something as big as this I want to film everything and get all the details so the people at home can do it with worry. 🙂
@mkvsanh9 күн бұрын
W
@ShayHarambe9 күн бұрын
Big W
@MrInvisible2you9 күн бұрын
Yesss we need content on this trans. There is little to none vids that go deep In detail about the trans upgrade. U are the goat
@ShayHarambe9 күн бұрын
I am super excited! I plan to get everything so the people at home can do a trans install and not be scared.
@ShayHarambe9 күн бұрын
If y’all have any questions when it comes to a Spool Performance transmission please comment below. I’ll ask and put it on video when I get my transmission built in a few weeks.
@justin87089 күн бұрын
You don't have to take the pin out and spin the bracket. You can leave all that intact and just loosen the nut and spin the shaft accordingly and obviously retighten afterwards. I've done this on my 2017 right away when I bought the car at about 100 miles on the odo. When I got my 2023, which was in late 2022, I totally forgot about this adjustment and I drove it untill 7500 miles without adjusting it. I just adjusted it like last week actually. On my 2017, I also took out the helper spring. On my 2023, I don't really feel the need to do that yet.
@turkicsayajin22749 күн бұрын
i can’t get the nut in the back of the rod loose… It’s so tight !
@irwan-cawan9 күн бұрын
appreciate the video! i also agree with the lack of things hopefully can buy it in the future
@ShayHarambe9 күн бұрын
Thank you 🙏
@loopernz10 күн бұрын
is your engine stock ?how is the transmission holding up ?
@ShayHarambe10 күн бұрын
Both was stock. Uhh well I blew the engine twice before I sold it 😅 trans never had a problem. I ran a 6 pick with lightweight flywheel.
@loopernz10 күн бұрын
@@ShayHarambe main bearing went ?
@ShayHarambe9 күн бұрын
@@loopernz the first time was pistons rings shattered on cylinder 2 and 6. The second time was a rod bearing. I can’t remember which one.
@ddxxbb110 күн бұрын
I wouldn't lower my car intake as this may cause issues with rain water getting into the engine.
@ShayHarambe10 күн бұрын
Do you drive through puddles or something?
@bart12d11 күн бұрын
Thanks for figuring this out and sharing! I just did this adjustment, and have some tips to add for anyone trying this: pliers work well for pulling the U-shape pin out so it doesn’t go flying. When you put it back, make sure you put the straight side through the hole in the rod, not wrapped around the very end with the white plastic ears. Also, a screwdriver works well to pry the metal rod loose while you pinch the white ears with your fingers. Lastly, the nut holding the spin-able bracket in place was stuck hard. I had to hold the bracket with an adjustable wrench while using the 12mm to break the nut free. We’ll see if it was worth all the back pain tomorrow!
@joeferry355811 күн бұрын
Can anyone confirm this for a 2018 wrx????
@ShayHarambe11 күн бұрын
Why not look under your dash and verify? 🤔
@joeferry355811 күн бұрын
@@ShayHarambe Never once has this been an issue in my car in over 92K miles, I got 58k on my oem clutch. 32k on an s2 clutch, now only 5k out of my last clutch. My mechanic installed both, & they were the ones to deliver the bad news on the current clutch. I asked them about pedal adjustments on hydraulic clutches and he couldn't help me. So once I get it back I'll def be under it. I STILL HAVE YET TO SEE ANY 2015+WRX Video/form/ link regarding this. The only info related to this situation is for 86/brz/frs. Hence why I'm looking for confirmation from other WRX owners.
@ShayHarambe11 күн бұрын
Hmmm that is odd. Unfortunately I doubt WRX owners are gonna watch something on a GR86 but best of luck.
@suprola796112 күн бұрын
No pwessure
@ShayHarambe12 күн бұрын
😂😂😂 that procedure and afterwards was a struggle
@ShayHarambe12 күн бұрын
The next video imma post everyone with a Supra is gonna wanna watch. It’s a game changer. 🫶
@gibzaficocinematography762912 күн бұрын
🔥🔥🔥
@matthewchevres497013 күн бұрын
So I spoke with spool performance and he did confirm the stage 2 transmission kit will hold up to 1,000ft lb torque "To Wheels" which is awesome. This gives us capability to go up to 7275 Next Gen Turbo if we wanted in future LoL
@ShayHarambe12 күн бұрын
Sheeeesh! 1000 lb torque is some serious torque 😧 I can’t imagine what that feels like. It does seem like a good future proof plan though.
@matthewchevres497012 күн бұрын
@ShayHarambe yes sir, exactly. As I'm sure you know it's always better to over build than just get by, especially if you are going to do dig pulls? Bro your 6466 when maxed out with get close to 800ft lb torque . My next gen 6870 which just came in today will also bring some torque!
@highcard615513 күн бұрын
Nice 👍 Also nice surname
@ShayHarambe13 күн бұрын
😂😂 there is a long story behind it
@hongchan120213 күн бұрын
I am fine where it is at stock engagement.
@ShayHarambe13 күн бұрын
Okay
@IlikeDogs-f7b13 күн бұрын
its a 30k car ur expecting too much
@ShayHarambe13 күн бұрын
😂 base model Nissan Altima $27,000 has wireless CarPlay and leds 🤷♂️ Base model Honda civic hatch has wireless CarPlay with leds and that’s $24,995 🤷♂️ Just to name a few. Entry level models too. It’s more so they cheaped out.
@matthewchevres497013 күн бұрын
Good morning brother, by any chance did spool performance state if the stage 2 transmission kit holds 1,000ft lb torque to wheel or is it crank rating. Website only states it will handle 1,000ft Lb Torque and that's it. Lmk thank you
@ShayHarambe12 күн бұрын
Not sure why but this comment never showed up on my new comment section until your newer comment. 🤷♂️
@nooneproductions2714 күн бұрын
That IAT2 temps?
@ShayHarambe13 күн бұрын
So I messed it up. I realized after I filmed I had that on charge pipe iats. Not post manifold.
@avrajuppal169114 күн бұрын
how did you initially activate the license for the car because when i try to do it with the wifi adapter it says wifi connection required ?
@ShayHarambe14 күн бұрын
My initial was with a wired set up. Honestly the wireless dongle kinda sucks. So it will keep saying the wifi connection required however you want a little notification to pop up giving you the option to use mobile data or connect to wifi. You want to click use mobile data.