Hi Thanks for your comment. The "i" light on your HP Envy 6020e means the printer having some kind of issue. Since you’ve replaced the cartridges with originals, it could be a connection issue, a firmware update needed, or the cartridges not seated properly. Try restarting the printer (unplug it for a couple of seconds) and or reseating the cartridges. You could also check the HP Smart app for details. If it’s still on you might run a diagnostic or update the firmware. Hope this will help.

Ya, Philips TAA6606BK memiliki mikrofon bawaan, jadi Anda bisa menggunakannya untuk berbicara lewat telepon via Bluetooth. Anda bisa menjawab panggilan dan mengatur volume langsung dari headphone. 😊 (google translate) Yes, the Philips TAA6606BK has a built-in mic, so you can use it to talk on the phone via Bluetooth. You can answer calls and adjust the volume directly on the headphones. 😊

The HP Envy 6020e has a cool LED light bar that gives you hints about what’s going on. It’s usually white when things are normal, flashes when it’s busy, and turns amber/orange if there’s an issue (like a jam or ink problem). The "i" light comes on when it needs attention, like for updates or connection issues

¡De nada! Me alegra mucho que disfrutes los vídeos 🙌✨. Gracias a ti por tomarte el tiempo de verlo y dejar un comentario tan lindo. ¡Significa mucho! 🙏❤️ You're welcome! I'm so glad you enjoy the videos 🙌✨. Thank you for taking the time to watch and leave such a kind comment. It means a lot! 🙏❤️

Thanks for watching and sharing your thoughts! 😊 About the wall mounts that’s a nice surprise! I have to say this TV is a 32". I'm not sure how it is with other models. Appreciate your comment! 🙌📺

Hi The dyson is around €550,-. so it's not cheap but it is very good

And Thank you for your nice comment! I hope you're happy with the speaker.

@@R-JayRockwell I used it for my workout in the garage yesterday, the sound quality is impressive for it's size. That's Megadeth playing. 😎 kzbin.info/www/bejne/gmeblaKBbdRmftksi=ALJ1j1yjCt-z_nPI

Hi, thanks for you comment. what plugs do you mean?

She is right that plug is from Europe not United States

Hi, did you allready got it? and do you like it?

Hi! Could you explain what you mean? Did it come off completely?

Yes, I’m still very happy with it! The only thing that bothers me is the noise when it cleans itself at the base station. It’s quite loud. Evet, hâlâ çok memnunum! Tek canımı sıkan şey, ana istasyonda süpürgeyi temizlediğinde çıkan ses. Oldukça gürültülü. (google translate)

That would be nice too!

As far as I can see Dreame says the following thing; "Only use Dreame Detergent and do not use normal cleaning solution as it will cause the water pipe to get clogged and prevent the water from dispensing" Of course, they want you to buy only their products, but besides that, if something breaks down, I think you might have an issue with your warranty.

It turns out you can! You can find more information here: support.hp.com/bg-en/document/ish_3967769-3956733-16

Hi, Thank you for your great comment! there is more to come! so keep in touch

Hi! I had a similar issue with my old machine, but I’m not experiencing it with my current one. I decided to invest in some original saw blades, and in my case that might have made a difference.

@@R-JayRockwell I think the problem is with the long blades when they bend from below. I have now cut more with shorter blades and it has been better now. I bought from Ryobi; Ryobi RJS1050-K, 680W. Seems like a good machine; I haven't tried it yet, but I've read reviews that it should be good. I also have a black and decker with a different blade, but it gives precise patterns and is very small and light

Hi, thanks for your comment! I use mine occasionally and haven’t run into any of those issues. It’s helpful to know what might happen with extended use, though. As you mentioned, it could be a common issue across different brands.

Hi, Thanks for your comment. I dont have problems with closing the suitcase. I think what you see is the hinge of the suitecase. It is sticking out a bit compared to the suitcase.

Hi! Thanks so much for your comment. I have all my devices connected to this printer, and if you're on the same Wi-Fi network as the printer, you can easily add it. You can do this by either: 1. Selecting "Add Printer" from the program you're trying to print from. 2. Going to your laptop's settings, choosing "Bluetooth and devices," and then selecting "Printers and scanners." There, you'll find an option to add a printer. Just make sure your printer is powered on and already connected to Wi-Fi. I hope this helps!

Hola, gracias por tu comentario. Siempre es bueno saber que a alguien le gusta el video. Cuando tienes un documento y quieres imprimirlo, tendrás la opción de imprimir por ambos lados. Si seleccionas esa opción, podrás imprimir por ambos lados con esta impresora. (google translate) Hi thanks for your comment. it's alway nice to hear someone likes the video. When you have a document and you go to print. You will have an option to print both sides. If you select that you can print on both sides with this printer

Hi, thanks for your feedback. The reason I don't speak in the video is so you can watch them at all time. So also when you don't want to or simply can't watch it with your sound on.

I hope the video was a bit helpfull

Hello, thank you for your comment. Unfortunately, it's a common issue with the X3 and S3 models. Fortunately, mine has been working properly for quite some time now. However, I've already had three of them break down. Now, when I start cycling, I press the turbo button and try not to apply pressure on the pedals.

Update: I contacted VanMoof to request a shifter replacement/repair. They said I can only get in touch with a “service partner” to resolve the issue, and unfortunate for me there is none in my country of residence. That’s the end of VanMoof support. I found a third party service provider located in Germany, who chargers about 100 euros to fix the eshifter. Sent it over today, hoping for the best.🤞

@@SundayShiif this is Revotronics, you should be OK! They fixed mine with no issues!

Hi, Thanks for leaving a comment. Good luck with your printer!

Hi Thanks for leaving a comment. As far as I can see Dreame says the following thing; "Only use Dreame Detergent and do not use normal cleaning solution as it will cause the water pipe to get clogged and prevent the water from dispensing" Of course, they want you to buy only their products, but besides that, if something breaks down, I think you might have an issue with your warranty.

Thank you for your comment! All the locks work independently.

Hallo, welche Anzeigen meinst du?

@@R-JayRockwellz.B. blinkende Ziffern, die kaum erkennbar sind. Nix ist intuitiv! Mein uralter HP psc 1315 ist da klar und deutlich neben den Leuchtdioden beschriftet und gibt keine Rätsel auf. Und, des tut mir für HP leid, aber die Entwickler sind in meinen Augen Idioten.

Hey! I got a size 10.5 myself. And I bought a size L kzbin.info/www/bejne/gIusmmhqpa1rmsU

Hi, Yeah mine als so makes a whooshing sound. Where I have mine I'm not that bothered by the sound but I can imagine if it's quiet in the room it can be pretty annoying.

Where did you get that fridge?

Hi, really? What's so horrible about it?

I think the base is quite simular. I hope to show you the s'cure line soon. So stay in touch!

Hi yeah, It can make a regular coffee/cafe crema and also an espresso

So far it's not a problem for me. Is it possible that you can solve it with the program you use to open your image?

Me resulta difícil decirlo. El asiento no es muy blando, pero es cómodo para sentarse. El tapizado es de piel sintética, por lo que tampoco es muy blando. (google translate)

Thank you for leaving a comment!

Hub likely

Hi, I'm sorry but I don't know what could be wrong. Maybe you can contact vanMoof again?

Hi, This error may occur when your bike cannot communicate properly with the E-shifter, or when the E-shifter cable is not properly connected. So if you are lucky it could be that the connector is loose or something

You're welcome! thank you for the nice comment!

Hi Thanks for your comment but what do you mean by "is roomba i7"?

Hi, to prevent your Karcher from breaking down, follow these maintenance tips: Regular cleaning, Proper Storage, Use the Right Detergent, Proper Operation Follow the manufacturer's instructions for operating the pressure washer, including water pressure settings and nozzle selection. And my last one broke because it was frozen. So Winterizing is also important. If you live in a cold climate, properly winterize the pressure washer to prevent freezing and damage to the pump and other components. Unfortunately they can always break down. If it happens let's hope you still have some waranty

It's amazing right? My wife is really pleased with it!

Is it the last model?

@@elifsenel1153 yes it is

Where u buy it ?? Ur Dyson is fake 😂

@@moiss61 haha good one. It comes from dyson itself.

Thank you for the feedback. I will keep it in mind in my next videos.

There is a button at the back but the if it is not working unplugging the power for a moment always works!

Mein System findet das nicht

Hi tHank you for your question. The cleaning solution will be added into the clean water tank automatically while working. So you can fill the entire detergent compartment

Hi, thanks for leaving a question in the comment. the blue light will appear when you will do the following steps: - Press the AuquaClean button for 3 sec. until the start light will start to pulse. - Than press the start/stop button to start the activation process. wait until the process is done and the bleu light will appear. You can see it from 5:27 until 5:53 in the movie