@@scorpiusgaming8523 do you have single coil pickups

@@alt-acc9391 I appreciate that lol

@@SadonekoGAVEN666 that’s a heck of a steal. Dolamo actually punches well above their price in my honest opinion

@@googaboogaloo I know, I thought it didn't work, I wanted to recycle the casing hahaha. I think I got lucky this time, still, I would definitely pay the real price.

Thank you but it’s just the overdrive channel on my peavey bandit.

@@googaboogaloo werd up!! the legendary bandit! Say no more... gotta love the peavey

@@squigglefunk8283 I’m a huge peavey fan. It’s a problem.

@@endezeichengrimm yes some of the old pedals used what looked like a headphone jack for the power in.

@@keithdador thank you!

@5:05 i was the setting I liked most but the gain dialed back to about 2 o clock

@@ImprovGuitarJams the fuzz and the vintage distortion are way better than they need to be

@@davidkulmaczewski4911 yes I am state champ actually. I have yet to find a bad dolamo pedal. I don’t know what it is about them but each one has sounded good. The vintage distortion in the best rat I’ve found.

@@vaughan7835 personally I’d get the Marshall because cheap Marshall’s in my area are very rare. But that’s a tough one.

@@Crabbadabba yes

@@regthorpe7923 because I’m actually in open g because of the short scale.

@@googaboogaloo Ah, the genius Mystery is solved.

@@matthewvilleneuve1452 I’d have to sit down and figure it out. My aren’t as polished as the old ones but then this was just an experiment. I’d have to figure out how much materials would cost, I just used some scrap aluminum my dad had laying around, but I don’t have any more of that.

@@googaboogaloo well, put me on the preorder list! :) really don't care about the aesthetics, just function and comfort. Do the arms need a bearing, or goodnuf to drill hole for shaft to closish tolerance and lube?

@@putraherlambang516 I think so? There is a review on Amazon that shows the inside. I’m not really sure how to tell if it’s true isolated

@@dayuhanspace I think they are the same pedal. I really like the tubulator. I tried it against a ts9 and I could get them to sound the same but also the tubulator has more gain and volume.

@@ScottfromBaltimore I’m glad. I also hate the ones where they stack all their gear behind them and have a fancy colored light. Pat finnerty nailed it by raiding a pawn shop and just having THE CHEAPEST gear behind him.

Can you please do a video? Or a reddit post?

​@tyayres7964 I ended up changing the capacitors to the dod yjm308 specs sounds pretty awesome for boosting. I will try to post a demo when I get it soldered up a d put in the enclosure it will be under Scott Rigney got2rock4u when I get it dod I will come back here and let you know it's out.

@@dexterj5615 I didn’t put the knob onto the back because I wanted it to look stock. I only modded it to 1949 spec and added the negative feedback pot to get more gain. I think I linked the video I followed in the description. Modifying tube amps is very dangerous l, the capacitors can hold voltage even with the amp unplugged. When working on the amp do not touch 2 things at the same time, you might complete a circuit and shock yourself. Keep one hand away from the amp at all times.

@@dexterj5615 m.kzbin.info/www/bejne/pH_HYpSwideXrac This is the video I followed.

@@dexterj5615 the video I followed was on Aldo sporados channel. He does a great job walking you through the mod.

@googaboogaloo I'm no simple sort I know DC is dangerous and to bleed the charge before doing any work and i check everything with a multi meter to make sure no current draws. Thanks for all of your info I think I want to do a potentiometer instead of a switch as well but will probably go with the front of the plate.

@@donaldlemieux I’ve used my dolamo vintage distortion (rat clone) super distortion and distortion plus. It sounds great with a boost infront of it

@@googaboogaloo We are in a world where technology is available to all at a low cost. Sometimes I look at all the investments made on gears, amps, and modeler units and see similar sounds so close it would be almost impossible to know if its top brands or products cloned off them. A good example is those Joyo Bantamp amps versus the original copy cloned. Don't be foul by the brand, or prices, if it sounds good it's what matters.

@@donaldlemieux i really want the joyo tweedy.

@@googaboogaloo I owned the Jackman 2, vivo, Zombie XL, all of cool and great. Boosting those with the Soul Food pedal in front makes them sing LoL. I was lucky and got a deal on a Hugues & Kettner 20 tubemeister. I never heard an amp sound so good. I don't miss my DSL20 Marshall at all. The Hugues and Kettner have a power attenuator built in. Cranked a low bedroom volume I get those tube tones, a solid contender full of features.

@@donaldlemieux I might have to look into one of those e

@@nickthewulf the decade is more versatile (and portable, like I can run it off 2 9v batteries) but the 303 is a a cool little tube amp. They both have things they do well. I would probably recommend the decade because these old tube amps can be dangerous if not brought to a tech and checked over. Some of these old harmony amps don’t have isolated transformers so they can kill you if used. That’s not hyperbole, they are called widowmaker amps and if you are buying one be very aware of what model you are looking at. The harmony 303B is a widowmaker where as the 303a has an isolated transformer and it safer, it still has no ground on it though, I have to fix that and replaced the caps.

@@googaboogaloo Yo thanks for the info! Might pull the trigger on a decade. I dig your demo of the audition vs the decade. Any experience with the backstage? Which one wins? thanks!

@@nickthewulf yeah I’m glad to help. no I haven’t tried the backstage. There was one for sale near my but I missed out on it. I know queens of the Stone Age used the decade but also the band All Them Witches uses the harmony h303a for some of their slide parts

@@kantina4765 that is a good question. Normally in the front of the amp the preamp of the amp does some distortion and is brighter. It has more gain in front and you need less filter but maybe I’ll make a video comparing the two.

Only one on the cheap side that sounds like Waylon like i want it to.

@@JoelDubay I’m experimenting with microtones. Like king gizzard.

@@stratrat57 for the price I paid it’s close enough. Cheapest actual univibe is probably $150. At least the Dano is bulb driven.

@@abc123iep thast awesome! I’ve watched his channel before but I haven’t seen this video. at one point I think I had 7 ds1s not including the hothead if you count that. We do lol, I really want a slash octave. I have a clone of the joyo called horse American sound. I like it a lot more than I should. I really want to try a bass muff vs a Russian. I just got a Russian and I had bought a broken bass muff but I couldn’t get it to work. It was all smd components, and those are so hard to trace issues on.

@@googaboogaloo you thought of SRV with the DS1...for me, it's Albert Collins + DS1 I have this dvd... kzbin.info/www/bejne/j5ixmIyDesmEopI Basically, it's his greatest hits, the band was tight, his tone was amazing

@@abc123iep not as well but pretty well considering the price. I have a demo of just the dolamo where i demonstrate that

i have it and not yet achieved the glassy clean up tone with this, the heavier tones are great and it's incredible that a $30 pedal has this versatility which impressed me a lot honestly. for something like a glassy clean tone i had to set the fuzz very low, level up, and guitar volume at 2, and add a booster for volume. and it kinda does it, but then your volume pot must remain there because turning it up a little might explode your house

read somewhere about a mod that would make it more usable in that sense, but have not tried it cause i don't know anything about electronics lol

@@dariohenriquez7773 what kind of pickups do you use of you don’t mind me asking. Fuzz face style pedals like the lower output single coils. But it doesn’t clean up perfectly for me either.

@@szveszs I’m impressed how good it sounds as a preamp