Thx for this - my AstroAI LY204A won't power on at all...but it does in the car, so I'm ordering the capacitors you recommended.

Was given an AstroAI LY204A mini-fridge to look at. This model has no lights at the front. When I turned it on, all I got was a flickering LED on both the warm and cool setting. The transformer was also making noises. Looked at all the caps (2x 1000uF 25v, 1x 33uF 400V and 1x 10uF 50V) and they seemed fine. So I desoldered all caps from the PSU and measured them with my multi-meter (AstroAI DT132A) in Capacitance mode. They seemed to measure fine (was displaying close enough to the expected values). I had some spare PSU boards lying around that I took from some dead TVs I couldn't fix. Unfortunately, I couldn't find any similar caps to the 1000uF and 33uF ones. There was a 10uF 50V cap on the board, however. So I decided to desolder that from the TV PSU board and solder it to the fridge PSU just to see what happened. Surprisingly, the fridge now powers on immediately and stays on (both settings). The PSU is also quiet now. So it seems like the issue was just a cap problem. I will be replacing all caps soon. Just wanted to see if I could get a quick fix without having to wait for parts. I am now testing its cooling function. I am not sure if it's working properly though. It is cooling, but it seems to be cooling very slow. I'm measuring the inside temp with my multi-meter. Room temp is 20C and after a few hours the temp inside the fridge dropped to just 16C. I am not sure how long these take to cool. Any ideas what might be causing slow cooling, or is slow cooling normal if it's been off for a long time? How can you tell if the cooling function is working properly/as expected?

Hi thank you for the reliable information. I need a part for GTR r35 I need a clutch basket assembly. Where should I Order

Mine goes on that loading screen and says connected and verification approved then just stays there

I still have to click on the car link icon to start Apple CarPlay. It never defaults to apple CarPlay the way it should.

Thank you for the tips 👍👍👍👍

Auto Shutt off works, it shuts off a hair past the desired psi. So mine was about 1.5 psi above what I wanted. I guess they allow for when you pull the thing off. It releases a bit of hair

Hello so my mini refrigerator stop working the lights come on from the mirror but for the hot and cold the lights don’t turn on and dosent get cold Or hot could you pls help me

Hi Jack, great videos. A question, on my GTR on track, there's a section with hard acceleration in 3rd, then straight back hard on the brakes before turning in, and then getting back on the throttle. I've noticed sometimes a very brief spike in engine RPM when I get back on the throttle. Could this be oil surge and loss of line pressure due to sucking up air? It only lasts a fraction of a second... I also use a transmission cooler which holds around an extra 2 litres of fluid.

Hi, I can se you did not put sealant on the oil pump, which is between the two compartments. Is it okay like that? I am just rebuilding mine and unfortunately I noticed that I did not put enough, thus I can see trough.

Hey thanks. I found this same fridge at a thrift store for a couple bucks. The 12v side works fine but the 110v does the same as yours.... I was actually looking for diy stuff and this popped up.

My daughter has same fridge and fan started making strange noise when cooling is activated and barely spinning. I’m planing to replace the fan and existing label only specifies 12DC Brushless Fan. When I search on amazon for fan, some of them specify ampers. Any idea ?

Will this Ecutek ECM software tune work on Stock GTR 2014 DBA trans with FBO ?? I just switched to EcuTek from Cobb--DONT wanna damage any forks, clutches on OEM gearbox etc -->WILL this TCM tune or similar work from your Video with different touchpoints--pressure etc?? My EcuTek Tuner Sam Barros says he can do the TCM revision tune ONLY-- IF ALL SAFE-on Stock OEM Trans or does it require Jacks clutches, seals upgrade-rebuild? THX

I have the same mini fridge that the cooler stop working. How can I fix it?

I have this exact same machine but I think you're expecting too much out of a portable battery powered unit because I just used mine for the first time today airing up all 4 tires from my friend's trailer with one of them being pretty low and it did take a little while but it didn't take that long and I think it goes past the amount you set it at because when you take the thing off some air always comes out like maybe 1 pound or so but I've only used mine once but I think it's pretty awesome so far honestly.

I was looking for a turtorial but I looked and what car did you put the screen in🤣we have one in our 2013 F-150 but that’s old

Jack can you go over the parking pawl and how to replace that component in the sstf.

Can please help me sir where can I go to fixed it my light is not working

Nice video, the hydraulic puller how many Tons capacity, please.

mean gj jack and evo 10 fro the win!

Do you send your parts around the world? Australia for example ?

FANTASTIC! I neeeeed one!!

Jack, I recently did a transmission oil change. Took my GTR to the local nissan delership to do a relearn but they told me there is no TCM communication. Any idea why this could be happening?

where you located?

What video camera were you using?

Very cool informative video.

Hi what if the clutch A pressure is at 600MV? Clutch B is at 480mv

Hi, thank you for posting this! I have this same mini and it doesn't get cold at all. Instead it was hot. Bought it on fb market the other day plugged it in and put cold setting on. Green light on back works and three mode lighting on front mirror works... Just wondering what would you recommend to solve this issue? Any advice or suggestions are appreciated. Thank you!

My led light turns on when I plug it in but when I turn on the cold setting it turns on completely and the green light on the back flickers once

You have successfully repaired probably the least efficient system designed to cool stuff. Congratulations.

Hi, actually I had a issue with code P0974 shift solenoid A transmission I gust looking the location of that.

At 27:10 he just straight unscrewed that filter housing without pulling out the plastic locking arm up top. I don’t know anything about these trans other than that. That’s all I know. I also know the filter housing assembly that the lock arm is attached too is about 300$ if you break that locking arm off. lol other than that I’m loving this video. Thanks for sharing. Hope that arm made it. lol

Mine blinks once and than does nothing, what does that mean.

I don't see the 5v @ 1000 on the ebay link is it 50?

Dude I noticed the SAME THING TODAY !! my twin brother called me and was like , man these are nasty , I said man I JUST noticed the same thing !! We both drink them every morn , we both left the same gas station at the same time this morn ... weird !

Amazing video!

I'll give the 1/2" PEX a try the next time those aftermarket plastic bushings crack and fall off. I think if they were Delrin and the correct length, Id and Od they would never need replacement again.

So the housing is very fragile and he put it in with an impact 😂😂😂😂 got it.

Great video doing research now for a Ls swap in my Baja. Flywheel was hanging me up. Looks like a f body camaro flywheel works aswell. Did you go aftermarket camshaft?

22:09 to get the speed sensor of that gearbox....wow no wonder the worksmanship is expensive..

Your gun mate. Wish you were in Australia

Hi, I confirm that the 10MicroF/50Volts capacitor was the culprit. I got the AstroAI LY1906 Model, with the same problem of the flickering light in the front. Just change the capacitor and way to go. If you can acquire the rest of the capacitors, like the video says, change all... but in my case, just with changing the 10Micro/50 Volts Capacitor do the work. For the tech you out there, i test the bad capacitor and mark 9.75 microF, so i change it. Thanks Jack for the video advice.

Any updates on this LS swap??

My daughter's just stopped working all together no light no power no nothing

At 59:40 , your dampener spring falls into the clutch as you're fitting it ? How did that turn out ?

Well I just did this to my 91 Ranger now the door is stuck closed. Any tips on where to go from here? Hoping I can get the door card off to mess with it while the door is stuck closed

Where are you located?

How much is this typically as a repair? Awesome video but idk if i can do this myself. Never even changed my oil lmao

So why can't the transmission be programmed to skip gears when needed? From 6-th to 3-rd or 2-nd for example? Please answer.

Hi is anyone know that DCT450 speed sensor same as DCT470 、