would loved to have heard how it sounded , one of the reasons i watched the video

No swing joint required?

Why do people go all out on the building and skimp on the furnace? The Mr. Heater is the lowest quality furnace available. Spend an extra 500 bucks and get the quality heater for your building. Just see in 3-5 years, experience talking.

Would all those parts work on the 4wd drivetrain. I have the same truck just 4wd 2003 standard cab XLT

Which kit did you use ?

30 amp seems way over fused for this pump. Your overhed switch is max 25 amp.

Looks good! a suggestion is when using primer have it tinted to the color you are after and it will make it way easier to cover and even save a coat of paint

Good review and advice. Thank you.

Do the f150 have the same suspension System as a ford expedition 2000

Is that a certified lift?

Just what I'm going to do to mine

Any idea where I could find one ?

I used to have a 2004 F-150 that needed a new timing chain and cams and drove great for the year I had it. Only downside is being from Minnesota and the boxed frame was getting very rusty. Unfortunately in February 2023 after almost having for a year and at 203k miles I slid on ice and rolled it over before hitting a tree. It was totaled and frame completely twisted but I walked away with no injuries. I now have a 2001 F-150 since March 2023 originally had 222k miles

I think I have this same issue with my 2015 Focus St.

Where did you get the hitch at? Mine is the same..

Great video, I am installing my lift in my garage next week. Does that 220 switch come in red like the furnace disconnects?

Is this the tubormsart iwg75 with the 150mm long rod and unf thread or is this the iwg75 with the 140mm rod and m6 thread

Very good review!! Thanks for taking the time to share your experience

Where did you get the bracket from to mount the turbo smart actuator to the turbo

How much for you to do mine for me? This is something I’ve never done and wouldn’t want to screw anything up doing myself.

I really appreciate your video. I just had my new Atlas 10K installed and the very limited instructions did not help me with the Limit switch install. I would have liked to see how you installed and adjusted the limit switch as well. Instructions that I have are not very detailed. This is just what I needed to see. I will order a On / Of switch like yours as well. Thank you !

Hey,Shawn, Glad to see you post again. We specifically produce LEDs for auto. Can we invite you to do a review for our product?

Can all turbos leak coolant... My coolant is going down fast.. No low boost power and white smoke from exhaust. Thanks

to replace a OEM or lightly better one for a saab 93 v6, which one would u buy?

Derich weaver lifts

I am confused this is asymmetrical and symmetrical lift , you said it wasnt???

Thank you man for taking the time to make this video ,My 2004 Fx4 hitch looks just like yours. Well I’m thinking instead of wire brush and paint using bondo instead 😂.

Is there any other way if we don't want to bend the rod?

I've got the Atlas PV10P and have many of the same issues that you have. Get 2 Harbor Freight safety stands, 1 for the front and 1 in back when lifting a heavy vehicle and It won't move an inch. I had to make my own arm adapters for smaller cars for the front arms. With out them the arms would go too far under the vehicle to be in proper position so now the vehicle rests on the middle of the arm instead of the ends. Otherwise the lift is worth the money. I always feel safe under it especially with the safety stands. The 10K lift does go higher than the 9K lift so thats not an issue.

😮dont you guys have hose pump trucks, to pump ot in by a hose

😊 I have never seen any crew pour without using a "Rod" to get it flat just after tamping, good job , came out flat, they good workers👍

I need to know what is better to rebuild the engine or change it due to heating

Here power has to be 10 feet from the regulator.

Good video. Just be a bit more lively.

What did you use for insulation

did the switch need to be double pole to run both hots through it? my diagram that came with my lift only shows using one of the hots to go through the limit switch and also inline with the manual shut off switch same wire. i am about to do a rough wire up to run the pump and bleed the cylinders. still looking for a manual cutoff switch to use.

Good video, I'm going to be running gas to my shed this weekend. Thank you

Is that 40mm?

Changing out the shackles doesn’t mess with pinion angle ?

Catch can .. just on 1 side? what about the other side?

Good video

They sell the reservoir mounts on their site.

All the comments about “you should be licensed”…. lol people can learn too without the certification

Never seen a relay fail closed but i guess you can never be TOO safe...

Where is the canister purge valve located?

I have questions ?

Hello, I'm seeking assistance with my BMW N55 engine, which is experiencing wastegate issues. Initially, the engine runs smoothly upon start-up. However, upon connecting an in/Hg gauge to the wastegate, it reads 5 in/Hg. Surprisingly, at idle around 700 RPM, the gauge jumps to 11 in/Hg. Any guidance on resolving this issue would be greatly appreciated the

Hello what was install time for downpipes? Thank you.

I was watching another car show besides your's, it's amazing how cheap they build cars, why does the price keep going up? Must be to cover all the re-calls!

I used 3in drop coils on the front and 2in shackles on the back on my V6 and it worked perfectly.