How to make leaping arches for your Christmas display

Find me on Instagram: @drift_dad_official
Music:
Song: Lensko - Let's Go! [NCS Release]Music provided by NoCopyrightSoundsFree Download/Stream: ncs.io/letsgoWa... • Lensko - Let's Go! | H...
------------------------------
Track: Hot Summer Party - MaikonMusic [Audio Library Release] Music provided by Audio Library Plus Watch: • Hot Summer Party - Mai... Free Download / Stream: alplus.io/hot-...
------------------------------
Stuff:
Ender 3 neo - amzn.to/3FyAZGy
PLA filament - amzn.to/3QuhN2U
PETG filament - amzn.to/3Qu8gsD
PVC Pipe cutter - amzn.to/3Yx64CK
Ammo Box - amzn.to/3VKv5s7
Wire strippers - amzn.to/3VHXZt7
WS2812B 5v LED Strips 5 meters 60 led/meter IP65 - amzn.to/3Ubtzh0
WS2811 12V RGB 12mm pixels - amzn.to/3UoAjsi
5v 12Amp Power supply - amzn.to/3Pcb4Z2
5v 60Amp Power supply - amzn.to/3u3raKS
12v Power supply amzn.to/3GOKe7k
Diffuser channels 1 meter - amzn.to/3EGIBpk
Diffuser channels 2 meter - amzn.to/3XEq45J
Junction box - amzn.to/3VosbbS
Solderless butt connectors - amzn.to/3VbtGKV
18AWG 3 conductor wire - amzn.to/3GNme4g
18AWG 2 conductor wire - amzn.to/3VbSz9t
Cable Gland Joints - amzn.to/3AP3iyl
Dig quad controller - quinled.info/p...
Pigtail Male - www.holidaycor...
Pigtail Female - www.holidaycor...

[@stevebrookins3980]

Awesome! Thanks! I think i might try these now. I just have a mega tree now.

[@ronm6585]

Looks good, thanks.

[@corinnejames3254]

They look great!

[@TmCkellar7]

Looks great!!!

[@poolman8676]

Too cool. Would love to get into this

[@realmiraclesandhealings]

Amazing talent

[@DennisWarner]

Nice work. Did you stick the leds down or are they just sitting in the pvc

[@ibegambit]

Could the pvc be used for the strips on the house?

[@DIYD_Do_It_Yourself_Dad]

Yes I suppose so.

[@noush4283]

Can you connect tow 16 strips together?

[@DIYD_Do_It_Yourself_Dad]

You can connect multiple strips but you’ll need to power inject along the way

[@noush4283]

I have to check how to I am new at this

[@soundzxtreme]

So do you have all that running through a software system on a computer? Or is it an app on your phone or what? I've been looking into purchasing new lights but I'm not good at the laptop/computer stuff. At this point I'm about to spend a grand on govee lights so I can make a show on the app.

[@DIYD_Do_It_Yourself_Dad]

For basic patterns and colors you can use an app called WLED. For more complex shows synchronized to music I use a software called Xlights

[@jacobburkett]

What did you use for the house lights? Do you have a video on that?

[@DIYD_Do_It_Yourself_Dad]

Yeah check my channel I have a full how to video on the house lights

[@kennethbutler8271]

as pvc is prone to uv degradation have you put a clear coat of spray paint on your piping ??? and has it worked ???

[@DIYD_Do_It_Yourself_Dad]

No I have a new setup for this season

[@Robbie822100]

@@DIYD_Do_It_Yourself_Dad What's your new setup?

[@garyambrose]

You're using 2 channels on the Dig Quad for this? If so, how does the effect work where it goes from left, to right from one strip to the other strip? Are the strips "grouped" in some way in xLIghts?

[@DIYD_Do_It_Yourself_Dad]

I explain in the video how I have it setup for wled. I haven’t used Xlights on them yet.

[@garyambrose]

@@DIYD_Do_It_Yourself_Dad I understood that you have 2 strips setup, one in reverse, and they're on 2 channels. One of the effects appears to be using both channels where it's leaping from string 1, to string 2 (the one in reverse). I was asking how that was accomplished - are the 2 led strips grouped somehow in wled then?

[@DIYD_Do_It_Yourself_Dad]

@@garyambrose yes so I tell wled how many LED’s are in each channel and how many channels are active. The effects will run through each channel in order.

[@hackerchickenYT]

How did you bend the PVC?

[@DIYD_Do_It_Yourself_Dad]

Very carefully 😅. I also used a heat gun.

[@BJAMIAM1]

will these arches stop porch pirates