I run an fs 460-c with a 3 bladed brush cutter..with a setup like that I end up with a nice clean cut without having to go back. I just recently ran .105 line on my 460 and that is a beast for heavy duty trimming/cutting.
@Coastie423 күн бұрын
that oil looked fresh
@Hmick051725 күн бұрын
For anyone struggling with threading the cord back in (the end was frayed), I used scotch tape on the end and that helped sturdy it through. Great video. Thanks my guy
@darkbulb367Ай бұрын
Pyrethroids on your property. Great for killing insects. In mammals Pyrethrin, Permethrin, Bifinthrin, Prallethrin cause renal failure & neurological disorders. "They" say pyrethroids are "safe & effective" but that's just more propaganda. "They" told us Agent Orange was safe, they told us Roundup was safe, both classified carcinogens. "They" told us Fluoride was safe... WHAT ARE WE LEARNING?
@jayosiris8944Ай бұрын
I took that spool thing off.
@daniellebattisti3483Ай бұрын
Where can you get that sticky screen? I am only finding small patches
@raczykАй бұрын
Hiw often shluld you change motor oil?
@luvluvluvluvcatsАй бұрын
Save yourself the trouble... let the local skunks do all the work! Put some fresh cut fruit outside the hole and every single bee and wasp will be gone by morning. Skunks eat more ground stingers than any other food!! Fruit draws them in to the dinner table!
@thetoolsman49Ай бұрын
Next time
@spider6167Ай бұрын
Over kill
@ZachMCarterАй бұрын
Hi Toolsman. I need to see how the personal pace traction cable connects to the handle. My torsion spring under the handle dangles - its ends aren't attached. I can't tell if something is missing like a broken tab or something, or if the spring simply came unclipped. Thanks! Follow up - I found another tuber show this. Its called the speed control spring; it has one of the handle bar rods through it. That video here: kzbin.info/www/bejne/naPdfqGjpZJ6l9Ufeature=shared. Cheers. BTW, my model is 20372 SN 312xxxx (DOB 2012).
@RickPopenАй бұрын
Worked!!! TY sir
@bradtipton986Ай бұрын
A few years ago I got stung while mowing by a ground wasp. I was able to locate the nest hole easily. That evening, after dark, I used a funnel and poured about a pint of gasoline into the nest, then lit the gasoline. It burned like a blow torch and bees tried to escape out of the hole. It looked like 4th of July fireworks with flaming bees traveling about 3 feet and falling dead. This was a complete success.
@0098Elaine6 күн бұрын
Bought a carpenter bee box, put some tuna in it and let it by the hole. No yellow jackets left. All go in the box and can't get out. Easy as can be and no sting!
@danielmcphee2546Ай бұрын
Getting them at night seems to hp a bit since they seem to be all in nest. Nest in our area dont get as big. Might try get the foam style one next time around, i heard they tend to be better
@dew12u2 ай бұрын
photoshopped!
@ggrimm792 ай бұрын
Thanks for the comparison. What model names were the rain gear?
@mischievoustoo2 ай бұрын
If you do not put the cord through the outer cover do Not redo it. Simply remove the handle off other end the feed it through way way easier!!!
@bobmervak14662 ай бұрын
Thank you! This was helpful. I told myself about a hundred times to be sure to thread it through the cover. I did not thread it through the cover.
@raulrobles29612 ай бұрын
How often should this be done?
@mrbassett4388Ай бұрын
Depends on usage. Light/normal use change it every 12 months before the cutting season. If it's used heavily change more frequently (twice per season) for maximum engine lifespan but you can get away with less. Oil is cheap enough and it never hurts to do it more often
@necrophagus92 ай бұрын
Balance?
@LOVE-JC7772 ай бұрын
You didn’t show where to attach by the handle. It’s kind of hard when the thing breaks and don’t know.
@JustAnothAngler2 ай бұрын
Where do you order the cable from? I just broke mines
@gailjohnson66702 ай бұрын
How many hours or often does the oil get changed? What about air cleaner?
@noahpeters20102 ай бұрын
Ive had one for a year I'm surprised yours runs better than mine
@HawkeyePierce19812 ай бұрын
I just did the method on a good sized nest and it worked. DO NOT HOLD A LIGHT SOURCE. Instead, put the flashlight elsewhere. I'm so glad that I changed plans though. I planned to hold the flashlight while spraying, but at the last minute I thought they would go straight for the flashlight so I put the flashlight about 25 feet from me pointing at the nest. If the nest was the center of a clock, I stood at 6 o'clock and the flashlight was at 3 o'clock so as not to blind me but direct the hornets away from me. I emptied the 3 cans I bought today plus the 4 cans that I didn't quite trust that I had on hand. Those hornets came out of that nest like a bat out of hell and went straight for the flashlight. Thank goodness I wasn't holding it. The hornets never found me, but man had I been holding that flashlight I would have been lit up.
@ClTlZEN_XАй бұрын
I tried that with bold faced hornets WHILE holding the flashlight, and they chased me 😂
@DonaldMang3 ай бұрын
Thanks for the video, just what I needed!
@leeanngail3 ай бұрын
Hi what tupe of cord is this ao i can both one
@thaAMAZNblue13 ай бұрын
Looking for that oil pan where ya go😊
@meshark_t3 ай бұрын
Where you get the cable from.
@MidnightshadeDC3 ай бұрын
Where can you buy the pull cord?
@MidnightshadeDC3 ай бұрын
Where can you buy the pull cord?
@douglasgriffith6603 ай бұрын
Thank you. Made me feel like a man fixing it.
@JohnathonORielly3 ай бұрын
What is the plug next to the oil plug? On mine, it's a gray cap
@JohnathonORielly3 ай бұрын
Can anyone tell me what the gray cap is for next to the oil plug???
@timwalter67953 ай бұрын
You offer no real clue about the most difficult part of the fix - reattaching the spring hook - as such I think this was a real waste of time video.
@cjhudson4193 ай бұрын
Thank you. Straight to the point. Thank God 🎉
@aarongentile72323 ай бұрын
it looked like one was sitting at top of hole on guard before you sprayed
@aarongentile72323 ай бұрын
sorry, I heard you say that at the end!
@OneHourPhoto13 ай бұрын
I made the big mistake of adding too much oil to my mower Started spitting oil and white smoke out of the exhaust Of course I stopped immediately
@rzawistowski333 ай бұрын
Thanks Boss 🙏
@mikeymike96163 ай бұрын
What is the purpose of that small rectangle hole on front right side of mower body? Mine used to have a black cover, but it fell off.
@mikeymike96163 ай бұрын
What is the purpose of that small rectangle hole on front right side of mower body? Mine used to have a black cover, but it fell off.
@Matthew-ef5cx3 ай бұрын
Hey can you use fuel stabilizer in a lawn mower? I’m not confident in a carburetor cleaning, and with my motorcycle I’ve been running a shot of starbrite through the gas at the end of the season - as I was told it cleans it out some. I’m going to do an oil change, but then was thinking of adding a shot of stabilizer to the gas to run through it. We have a rider-size lawn that we use a push mower on, so yearly oil changes, but it still sounds like it’s struggling. Junk in the fuel line/carburetor is my guess, and was thinking maybe stabilizer could be a little cheat before having to do other stuff.
@wbwills24 ай бұрын
Word UP!!
@emlsolutions67764 ай бұрын
Safety first, kid! Disconnect the spark before ever exposing or going near the blade.
@billybobjoe28184 ай бұрын
good job dude ! Thx
@mariosanchez-sj9yv4 ай бұрын
Best video on this cable job
@stephenparchewski19984 ай бұрын
What is it with people beating the trimmer head to advance the line? Put the trimmer down, push the button, and pull the string out a couple notches by hand. It only takes a second instead of beating the shit out of a $400-$500 trimmer.
@tosinobatuyi12314 ай бұрын
Very simple and helpful! Thanks
@mikeymike96164 ай бұрын
What is that free floating washer on the shaft of the gear box? I have that washer on my Toro too.