you are frekin genius thanks

I've been having the same issue. Even after making adjustments to the wash mode, trying vinegar & other ideas, bubbles still continued to flow out on the final spin cycle. I made a call to the Speed Queen Queen in Texas. I told her the issue. She quickly stated to run each next set of loads without any detergent. That detergent is more concentrated now & too much is remaining in the clothing. She recommends after washing all loads w/ just water to get rid of the detergent from the machine and clothing, to start using only 2 tablespoons per load. She said that will be sufficient. So far, I'm just washing w/ water & will start with less detergent within the next weeks. If bubbles return at that point, I'll put in another comment about the problem. If not, all is good. Oh, she mentioned using wool dryer balls in the dryer instead of sheets. Add essential oil drops to the balls if you want a fragrance. Wish me luck!

Will this work for pidgeons on my balcony?

Thank you! Very timely for me!

I have the exact same clock. The clock keeps time but I need some replacement movement parts or possibly an entire new movement. The teeth on the gears for the left and right are worn and the chains slip.

Thank you for this great tip! Worked like a charm in my new 2024 Palisade Calligraphy! I ran out to my SUV as soon as I saw your video.😂 Yayyyyy!!! Saved me from buying the aftermarket device for $99 to bypass it. 🎉

well im glad you got straight to the piont and didnt waffel on and on and on ha ha

Thanks man.. Just dropped my replacement tail light for suzuki swift haha. MEK or buy another one?

Excellent video! So glad i found this. We just bought a 2010 Fusion 4 months ago. And we were having the same intermittent issues with the blower motor, finally it just quit and filled the car with an electrical burning smell. We knew something about connection was bad. Ended up being the exact same issue. Thanks to your thorough explanations of everything, we can replace and repair ourselves. This was so helpful and saved us hours of troubleshooting.

This feature is not reflected in the stated EPA figures for the vehicles. If you were in the city and stopped for a longer time it might make a difference of 10 percent according to some private test. That said, it is annoying and very hard on the vehicle to keep doing this. I can not imagine shutting down the air conditioner for a couple of minutes waiting for a light to change.

My mother in law has had rocks for 25 years. Theyre black now and ugly

Great video. Could you tell me what the name of those bushes are with the red flowers?

I just go over it with the lawn mower in vacuum mode to collect everything into the clipper bag works great

Excellent idea and job, looks beautiful.

Is Vinegar safe for tinted windows?

Man I hate birds. They aren't good for nothing.

Gracias..

Hello. Congratulations on the video. Any suggestions on how to remagnetize the motor rotor?

Totally agree! Ive used mulch many times of last 15 years...then my giant Oak tree drops hundreds of lbs literally ..of nuts onto the mulch area and then weeds grow on top of the mulch :(..... So for next season Im going to purchase river rocks to cover my garden in front of the house.. Your garden looks great BTW !

I straight up hate most birds, glad I found this video. They’re definitely a problem where I live as well. I will keep this in mind 💙

Thank you! I came here as I am dealing with this now! I have some acreage and am blessed with many, many wild blueberry bushes. The birds like the berries too. They are popping blue all over everything! I will try this!

Wow. I guess I've been doing it too slow!

Brilliant presentation. Like you, I appreciate (and need) the details and answers to the “why” questions. My son in law is experiencing identical issues on his 2006 4Runner. I’m hoping the back seat access hole is larger than on the 2005 but dropping the tank isn’t a show stopper for us. Again, thanks!

Hey, do you have any of these motors for sale?

I just picked one up and i cant get the chime to stop any pointers? Love the clock

He had a problem with birds making nests in the dryer vent and stove vents. I went to Dollar Tree and bought a roll of blue garbage bags and some push pins. I tacked 4 bags on the wooden fence near the fence near the vents. The freakin bags work!!! And because the bags are near the AC, the bags move around a lot and the birds stay away!! Your idea is truly freakin awesome!!! Thanks!!😂😂🎉❤👍🏼👍🏼👍🏼

yes this is what i need, as low maintenance as possible and always looking good because i just do not have the time!

I hated doing this but I had 1/3 acre under landscaping and it was just too much. I am a cook so have a ton of compost that I've added over 25 years creating incredible soil. Many are unaware that a lot of much contains bad chemicals or are painted and the cost has exploded ($2,500 / yr). I returned some areas to "grass" but much of it got the rock treatment (smaller rocks). The yard guy even put down black plastic underneath and left room on top for water. Everyone comments on how great it looks. I love it. I had to do it one time, it looks great but there is a drawback. It does not keep the ground as cool as mulch which is why it is great for trees and shrubs. Now I have containers around the pool, several raised beds and an herb garden to "play" with.

“Cap full of detergent.” This is your problem

Thank You for this video!!! I have a SQ and have been dealing with this for years! It doesn’t matter how little of detergent I use. It foams up and drives me crazy. I’ll definitely be trying this method! Thank You again!

Thank you for your video!! I’m ordering this now- been living with this ridiculous lint trap and no cover for 7 years! Drives me bonkers!!

What is the purpose of the screw in the filter?

You can go dumpster diving for old carpet to use as weed block. The soft carpet side faces down and the carpet canvas is on the top side. Spread the rocks on top of the carpet, and you will not have weeds.

thanks so much for the video, im gonna dare to do my own landcaping; wish me luck. PS- i think i have that same kind of flower bush, mine sprouted this spring and now its summer and its dead. idk why or how to fix it. Help!

I hate that it’s screwed in and you have to unscrew it to clean underneath it

It’s missing the piece that fits Ofer the screen I’ve got the same model

like others on this channel i discovered similar issues with an older (11 years to be exact) speed queeen comercial washer. let me first state ,this has been a wonderful machine with absolutely no problems except the foaming. am not sure how long foaming has occured,but do know that it is consistent since i discovered it by accident a couple of months ago. have since tried some of the solutions posted here with inconsistent results. have tried other things and found a solution that is working 100% of the time,approx. 20 loads sofar. the machine pumps water(and air ) at the end of the rinse cycle so fast, that ,is in my opinion causes the foaming. the solution for me,(my entire rince cycle on permanent press or regular cycle is approx. 14 minutes ), is to shut off the rinse cycle at approx. 11 minutes into the cycle,wait 15 minutes ,then turn machine back on to finish cycle. NO FOAM OR WATER also, the 14 minutes is from when the tub starts to fill with water. good luck

Mulch keeps the soil underneath it cool, while rock does the opposite, because rock absorbs heats and radiates it. But if it works for you just do it.

Thank you for this sir. I love my 23 Palisade, but man I almost sold it cause the stop/start engine feature was driving me crazy, specially here in Vegas where in the summer is easily 110+ and the AC also turns off with this feature. Thank you.

That would look amazing with 0.50-1.5in river rock or Mexican river rock.

Termites love mulch, everyone gangster till they get termites 💀

what is the name of the plant ?

Could you also lower that bed so its level with the pavement,and put in edging, wouldn't that stop the mulch river?

I took out the LED bulbs and put in older CF bulbs and it works better now.

Its pathetic.. why not just allow user to turn it off permanently for good..

Looks like the surface of the moon

Firstly, thanks so much for posting this video. I had the same issues with the speed queen we had in a house we recently purchased and if nothing else this feels like a support group. While I tried all of the recommendations and had little success I wanted to share that I did have success using 7th Generation detergent and fabric softener. I added the softener to the dispenser before running a load. Just up to the first line. And add a few ounces of the detergent to the running water after mostly full. All on the normal/eco cycle. Three cycles so far and no suds. Might just be that 7th generation doesn’t make as many suds? Regardless of why, it has worked for me if you want to give it a shot.

what brand weed barrier do you use for this project?

You are probably using too much soap that's probably why you are have suds issues!

I don't see where you taking the blower motor and wires out at