I used my camping inverter generator. It's a 120V and running is 2100 watts. Needed a ground bonding plug and with the 120V adapter at the 12 amp max (1440 watts) on my Model Y I got 4-5 miles of range charged per hour.

Funny thing is still need gas. Just get a real car....

When pro form says 1.5” is that measured at the rear wheels? Like where you guys measured?

Well sir they’re $182usd now. Hmmm

Don’t buy this stupid product, it messed up the paint in my car.

It worked. I found taking the solenoid completely off make it easier to get the new starter in. The top bolt holding in the starter is a real pain, especially with the towing package with transmission cooler- i needed a crowfoot offset to get it loose and then ratchet-box-wrench. Leaving the black 12v lead/housing off while installing helps. Tab broke off the little black plug, just like he said; I drilled a tiny hole and small screw to hold it in place. Full disclosure...Nothing about this repair is fun or easy...Took about 6 hours

You and your son must be on some good cocaine this video is chaotic

On the tundra

How did you get more mileage

You and your son are living my dream when my son is a little older me and him are building his first car for sure.

Shoutout to the wholesome father/son work.

Do you still own this car? How was the ride quality?

Hello how the ride and handling after you replaced unstill now

Those pre-assembled KYB struts' bearing are not good. Learnt a lesson. would rather buy just the strut & spend more time changing it out using old original Springs & Bearings.

So just did this repair on 5.7 2010 and it was a freaking pain. Summertime florida started before sunrise. Didn't end needing to take the solenoid off I played puzzle and it came out. The main issues was the small space, for the top nut. Killed most of a hour one 8th turn at a time. Mostly just painful places for hands and positions. And I bit of time killing screws took 7 hours with everything fighting me, beats the 1200 quotes I got thou

thank you

That's not true the Ford ecoboost engine is almost on par with a Nissan Altima or cars of that style I usually pay about $120 maybe 150 from California to Arizona and with a EcoBoost Ford truck I rented one time I think I paid $170 there and back that is not bad for a truck problem with the Ford F-150s with EcoBoost is that those engines go out quick they start having header problems around 160 thousand miles.

there's no access cover for the oil filter on my 2020 tundra

More interested in if you could convert the generator power to supply the solar power input.

Hahahahah Gas is $10 a gallon?!??? This isn’t Europe

One question & thanks for your video. I'm going to have my cousin do it for me he has all the tools. The question is how it felt after the installation. Was it smooth like new or just OK.

Kudos for teaching your son to be self reliant!!! I am replacing both front struts on my 2009 RX350. I have seen other videos showing that you have to remove the axle nut, but you didn't remove it, so I am going to try your way. I have replaced both front axles in my RX350, and I really don't want to remove the axle nuts again if I don't have to as I am not using power tools. You make it look fairly easy, and I hope that my strut replacement goes as smoothly as yours did.

Thank you, we have a sequoia 16 platinum I want to do the same

As today July 2024, are they still working fine?

End of the world and you worry how to charge tesla

Tesla needs to work on the charge times this is def good idea would def keep a genny in the trunk

9min each side???!! Wow! I have a 2016 Lexus RX350 base and they said it would take 5.5 hours of labor to do the front 2 strut assemblies! $600! Does that sound right?

But is it different for the awd ?

I have a 2012 Lexus RX 350 , looking at this video I purchased KYB from the link. Biggest mistake I ever made, waste of money. They don't ride the same at all like the OEM , this are garbage, don't waste your money, now I'm going to have to spend more money to get the OEM. ALSO I paid a mechanic because l change the control arms too Don't buy KYB is garbage, the ride is rough , stiff ,bad .

Did you ever contact the guy that made the harness and ask if you specifically needed to put the ground (grey) wire in the harness ?

What will they think of next? Build the generator in the car?

Great video..Kudos!!

Come on ...Give the kid some gloves...Lol

Please say you used some thred lock on the nuts...???

your son is so wholesome

Hi, how much engine oil is lost during this procedure?

Now put the generator inside the car and start driving while ots charging, will it work?😂

Still waiting for $10 a gallon gas prices, LOL. Blaming any sitting president for gas prices is ridiculous.

Hello, I was wondering, did your car ride hight get raised a bit after you installed the new struts?

You guys should do Cybertruck generator charging test

Just watched your video, about to change mine. I'm seeing A LOT of complaints about the parts from Amazon crapping out and was wondering if yours still work? Thanks

I'm about 1/4 of the way through the video right now and just want to say how awesome the father son dynamic is here. Im so jealous! Lol. Keep it up! He will remember this stuff for a lifetime!

How’d you get it to have amber and white for drl? Mine is all white , amber only when signal

Why are aftermarket junk?

This "fix" only lasts for about a week on my 2021 TRD Pro before the cable ties break. Also noticed that the shaking bezel has worn away all the paint on my bumper cover from the constant rattling. Fucking Garbage

This is by far the best review i have seen ever of anything

get some used TRD rock warrior rims

Is there only air suspension on front?

How long did your shocks last before replacing them? Were there any symptoms ? Thanks again for the video.

I have u-haul install the trailer hookup and wiring. I wouldn't want the wires go through the lift-gate while towing.