14 сағат бұрын
Ай бұрын
4 ай бұрын
5 ай бұрын
5 ай бұрын
Пікірлер
@ThePooching 7 сағат бұрын
I know what you did there.. 😂
@georgelouvitakis2250 2 күн бұрын
That is all well and good, but did it start the car?
@1947froggy 2 күн бұрын
yes
@jeremyhowerton5974 2 күн бұрын
Great video...thanks
@1947froggy 2 күн бұрын
Glad to help.
@kam75 3 күн бұрын
a screw extractor ez out is the right tool not a tap.
@stevendisney 3 күн бұрын
Can you repost the link to the battery so I can order one?
@1947froggy 3 күн бұрын
Put another link, Banshee out of stock. Any 14-bs "should fit/work"
@1947froggy 3 күн бұрын
The 1 inch phillips screws fasten the unit to backing plate, the torx lock the cover over all using blue driver. #ad amzn.to/3XI4rUI
@Johny40Se7en 4 күн бұрын
Insightful video once again, cheers. Oh yeah Froggy, has anyone ever brought up how your voice sounds VERY similar to a particular voice actor of video games? 😅😆😝 kzbin.info/www/bejne/fofVoaZvhManb5I
@jtgrec3179 4 күн бұрын
You 132, did you mean 134?
@1947froggy 4 күн бұрын
sorry yes 134a
@Asseater-lp7dm 4 күн бұрын
Great video awesome
@robertphondros6537 5 күн бұрын
Way to dark
@codycantafio5911 5 күн бұрын
Gotta do a headlight resto vid next 😅
@1947froggy 5 күн бұрын
I know, been a while, I have an old video of me doing this truck. :)
@johnperez93640 5 күн бұрын
And also, on those trucks, its recommended to not connect the high side quick connect because the rubber shradder valve seal usually will leak.
@1947froggy 4 күн бұрын
Had to replace mine another video.
@johnperez93640 5 күн бұрын
Where did u get that tank for $60? Ill buy every one they have in stock for that price.
@1947froggy 5 күн бұрын
I wish, it was a few years ago, illegal now unless you are licensed hvac or live in a free state. Probably 5x the price.
@johnperez93640 5 күн бұрын
@@1947froggy oh ok. The video being posted recently had me thinking this was recently also. Im 609 certified to be able to buy refrigerant in bulk at a cheaper price. 4yrs ago i remember buying 3 tanks at a time for around $90 each. A year later i went to buy 1 tank and was being charged for my usual 3 tanks. I said, no i just need 1 tank. They said, yeah thats for just 1 tank now. Took me about 20min to wrap my mind around it. Anyway. Thanks for the video. Keep on makin' em cold.
@1947froggy 5 күн бұрын
@@johnperez93640 You do know then, that a very small amount of leakage (at least in older systems) is designed in. In particular the compressor shaft seal leaks a little so the pag oil can lube the shaft. Topping off is a service item, like adding air to tires, air leaks out of tires too. Such is life. Thank you for posting, happy 4th!
@johnperez93640 5 күн бұрын
@@1947froggy my daily driver is my 89 silverado with 154k miles on it. Havent needed to put freon since converting it to r134a. Been 10-12yrs. Friends tell me to turn the a/c down because theyre cold. Im seeing a steady pattern in these conversations. Doing things properly seems to give best results.
@1947froggy 4 күн бұрын
@@johnperez93640 Amazing!
@jewllake 6 күн бұрын
I've been pretty lucky with my 2006 GMC Yukon. It still blows ice cold with the original charge at 145,000 miles. I always have the Auto A/C on so the compressor is always running - perhaps this keeps all the orings and seal pliable???? On the other hand, our 2006 Honda Accord with the auto a/c and also always running, I've had to add R134 A every 4 years or so. A win for GM!
@1947froggy 4 күн бұрын
Honda's leak it.
@1947froggy 6 күн бұрын
#ad amzn.to/4cnmL9Z #ad amzn.to/4cIQNVu Couple of things. 1) I know there is a leak, so top it off every couple of years or spend a few thou to fix it "perfectly" on a 20+ year old car, your choice. 2) That scale was all over the place, disregard it. 3) I'll do another video on adding pag oil, stay tuned.
@johnperez93640 5 күн бұрын
Or spend 10min to properly diagnose where the leak is, and then spend between $1.00 - $250.00 to repair the leak.
@1947froggy 5 күн бұрын
@@johnperez93640 Why does a dealer need 2 hrs labor to diagnose when it's so easy, hmm, troll.
@johnperez93640 5 күн бұрын
@@1947froggy the dealer is a different situation. I was going based on the video of u doing it urself at home. Fixing ur own vehicle and not charging urself labor saves u thousands of dollars. Based on ur video, i was just suggesting that one would just diagnose it properly because ur not charging urself labor. Not a troll. Been turning wrenches and spinning sockets for 25yrs for a living working for myself. Not a troll. Just suggesting whats logical based on the video u posted.
@johnperez93640 5 күн бұрын
@@1947froggy because dealers have lots of overhead that needs to be covered at the customers expense. Its the dealers protocol to upsell as much as possible for maximum profits each day. Lots of service reps actually get fired if they dont try getting as much as they can from the customers.
@1947froggy 4 күн бұрын
@@johnperez93640 Yes truth
@bryantphil5577 6 күн бұрын
R 134a and you dont TOP OFF A/C the gas is not consumable it means there's a leak. This is NOT a proper way to do A/C and is an EPA violation
@1947froggy 6 күн бұрын
Thanks for the comment. $2k-3K for a/c service v my almost free diy. Take your pick. Let's go Brandon!
@jewllake 6 күн бұрын
@@1947froggy He must support Governor Gruesome!!! LoL
@rtorreano 9 күн бұрын
Never mind giving warnings not to open the radiator and check the level there.
@1947froggy 11 күн бұрын
#ad amzn.to/3XAY2e0 more golden I kept #ad amzn.to/4bjpDTY Less golden less flow
@ejsgarage 17 күн бұрын
LOL Froggy, I was watching your Corvette videos and now you are doing gun video :)
@kiwi7341 18 күн бұрын
Great video. I had to manipulate/ bend the spring in the trunk latch, that solved my problem..
@RocksReTreat-mi9yo 19 күн бұрын
This is so helpful. Thank you! Do you know if it’s possible to take the v6 cover off as well? I have a gas leak somewhere bc I can smell it but no lights on dash and I’m trying to see if it’s something I can manage myself
@1947froggy 19 күн бұрын
I'm sure it comes off easy, but have not done it yet, on my list to do. Thanks.
@danielbudimir8519 19 күн бұрын
Also my c5 creeked at shock bushings...easy fix spray bushings, instant fix
@Leonardo-qu7jc 20 күн бұрын
I have the same problem I have leaks coming from the nipples. And I just removed them and there attached to a dip tube. Is it necessary to buy the dip tube again. I can’t find it or can I just replace nipples like you did
@1947froggy 20 күн бұрын
I did not use the dip tube, probably it's better with as it puts the cold refill water down away from where the hot exits, but yeah it'll still work. Maybe a bit less efficient. If you look hard you can find one (fitting) with dip tube included.
@1001Balance 20 күн бұрын
Dave
@akquicksilver 21 күн бұрын
I believe the CB you changed is actually the heat contol board, not the main contol board.
@1947froggy 21 күн бұрын
Could be, it worked. :)
@jbro6659 23 күн бұрын
That’s illegal in a lot of states, including Cali. Good job at endangering lives!
@1947froggy 23 күн бұрын
Thanks :)
@rexmasters1541 23 күн бұрын
I have a MWD oI do not have issues around my house.
@rorynygard3806 23 күн бұрын
So tonight I had some freak looking into my window also was on my lawn. I live in Montana and as badly as I wanted to detain this freak I would be the one going to jail once the freak claimed I hurt him. I followed him until law enforcement arrived and I’m a year of not being in shape. Any how I’m proud of myself to confront him and now the police know who he is.
@NhanNguyen-ci6bb 23 күн бұрын
Will the rubber gasket inside be affected by the solution?
@1947froggy 23 күн бұрын
So far as I can tell it does not get to the gasket, the MAIN gasket is on the back screw off side.
@bwsmith101 23 күн бұрын
Fortunately, my shotgun doesn't need a wall outlet.
@timothyvandenberg2905 24 күн бұрын
Thank you!
@davidswick8353 24 күн бұрын
Froggy, Still grateful for the money you've saved me in the past repairing my C5 Corvette!!!
@jewllake 24 күн бұрын
Thank Governor Gruesome for the uptick in crime. I but a bolt and nut through mine a long time ago. No thief is going to carry two set of pliers or the correct sockets.
@1947froggy 24 күн бұрын
Good thinking. :)
@brownwj3 25 күн бұрын
Auxiliary Battery Malfunction
@1947froggy 25 күн бұрын
#ad amzn.to/3xdHI8a
@1947froggy 25 күн бұрын
#ad amzn.to/3KDDSbx #ad amzn.to/3KDbtCk #ad amzn.to/3yT90Bl
@Kovar99YT 25 күн бұрын
12 years later and i needed this video ty !!
@spercoco 25 күн бұрын
I'm no mechanic so I always have work done by someone who is a certified mechanic but the guy I found to work on my c5 Corvette allows me to order the parts; the problem is I can't even do that right. My directionals are not working. I wonder if you could help. are you familiar with Rock Auto? I also have the check engine light on and got a code of po440 which everyone is saying could just be the fuel cap but I'm not even confident in getting the right replacement cap. I guess I am so skeptical because I have already ordered parts; brought them to to mechanic and was told they did not fit. The specific part in question was the heater display. Who ever owned the car before me did something to make it so that display is unreadable. Do you know that part number? Here are the other parts I need and this is the direct message from the mechanic: I got part numbers from corvette central. Seat track bushings #485078 Rear weather-strip #635047 Side panel weather strips #635007 Hazard switch #595006 You can get the weather strips and hazard switch from Rock Auto for half the price
@1947froggy 25 күн бұрын
Rock auto I have used, get oem or better parts. I can't specifically help with the details. If you trust the guy let him get the parts, just make a deal that he does not mark them up over cost, or just a reasonable amt say 20-25%
@spercoco 24 күн бұрын
@@1947froggy Thank you. I am thinking there is a number I can call at Rock Auto with someone who can help .I think if the mechanic orders the parts he should get compensated for his time. He was actually laid off from a place he was working because he was not pushing to sell to customers parts they didn't need; there was like a 100% mark up there but he has no interest in making money off parts. It's just Iam more motivated to order what I need and get it done in a timely manner so I can use this car in the short months of good weather we have here.
@Mr300ZTWINTURBO 26 күн бұрын
You had a very good pointers. Thank you.
@Johny40Se7en 27 күн бұрын
6:11 "well there's your problem..." 😅😝 Those two bolts connecting the control arm that you were replacing to the main lower arm perhaps needed to go on last. Get the bit you're touching at 5:18 secured first. Reverse order as they say. Also, put a jack under the wheel / knuckle and jack it up like it's shown here. It's a GS model but same principle: kzbin.info/www/bejne/iqjXZWqZq7Z5oLs
@1947froggy 27 күн бұрын
Thanks!
@MrJodaddie 28 күн бұрын
The black box that you said you weren't sure what is at around the 6:13 mark is your stereo amp.
@1947froggy 28 күн бұрын
Thanks!
@robertmunoz7543 Ай бұрын
Great tip simplified!👍 Jman
@oeicraig Ай бұрын
Thank you, wished I would have watched how to install the snap ring, before I shot it off into my backyard. Quick question: Where do the ball bearings go?
@1947froggy Ай бұрын
Sorry, been too long since I did it, don't recall :)
@thomaswilson8634 Ай бұрын
At home depot next time buy a box or pack (5 or 6) of BLUE electrical wing nuts. They work absolutely perfect on those tubes. Twist on twist off.
@1947froggy Ай бұрын
Sorry one clip got in twice.
@chris103193 Ай бұрын
I put painters tape on my lug nut socket too Subscribed
@naomimacdonald1658 Ай бұрын
This is the only video I’ve found for this model. Thank you so much!
@KevinCoop1 Ай бұрын
Hopefully you kept the old boards. Mine, the light would go out and not work. A couple whacks on the side and the light would come on and work. The problem was the P1 connector had a bad solder on the signal board. And also a bad solder on the pin in the power supply board that feeds the signal board P1. Quick resolver and works perfect ever since.
@MarthaLink-bj5hq Ай бұрын
That’s why I don’t twist Take a one by six boards onto the wall on each side clamp your vice grips on take two crowbars and pull out evenly comes out in about five minutes even if it’s really really stuck Valve was stuck for 25 years
@1947froggy Ай бұрын
Sorry a bit out of frame at the beginning of each clip, but the main point is across. I'll blame it on the dog. Haha.