What firmware version is this, i notice not all units have the airmap option
@MikePennacchi2 күн бұрын
I believe it was version 5.0 where the AirMapper option showed up.
@LeirbagIII26 күн бұрын
Excellent!
@NateHancockАй бұрын
Hi there Mike! I have an LR10G and am able to use a single device with a physical fiber loop back plug just fine. I am trying to use my single device to test an ethernet cat6 cable with a physical loop back plug. The plug I have may be faulty because I cannot get the lanbert generator to establish a link using a cat6 physical loop back plug. Have you done a lanbert test on a cat6 cable using a single LR10G and physical loop back?
@MikePennacchiАй бұрын
Unfortunately you could only do 10/100 with a physical loopback plug. Since 1Gbps uses all four pairs for transmit and receive, there is no way to physically loop them back.
@VisualBeowulfАй бұрын
Great Mike, thank you.
@BraddemanАй бұрын
Are you kidding me. $15-$17,000 for a glorified nmap scanner. there has to be a lot more it does. hopefully it just adds on the ether scope line or something for that amount and has all those features as well.
@MikePennacchiАй бұрын
It is a WiFi only version of the EtherScope, with the addition of nmap. The integrated tri-band analysis and discovery are where the real power lies. As with any tool, it comes down to your time vs the cost of the tool. This will get you to the root of the problem faster than any open source tool I've ever used.
@MikePennacchiАй бұрын
Also, the cost of the CyberScope Air is closer to $7k.
@BraddemanАй бұрын
i pulled up cdwg and they had one for the price you said and they also had one 17000.00
@JustAGuy852 ай бұрын
It's fun to play with but it doesn't give NEARLY the real throughput that you get simply sending a file from your phone to your PC over LAN, though. What's up with that? 30-50Mbit/s is SLOW for LAN. And, yeah, I get the same kind of results on 5Ghz using an S10+ through a router on 5ghz connected to a nice PC connected to the router on Ethernet.
@betsykoho63152 ай бұрын
I need to get my OTDR calibrated, new to this position with my company- how do I go about doing that? Where do I send it?
@MikePennacchi2 ай бұрын
Here is a link to the calibration page on the Fluke Networks website. There is a phone number on the page where you can obtain a RMA number to send it in. www.flukenetworks.com/content/calibration-services
@air30522 ай бұрын
This man spread misinformation
@Masti-Family2 ай бұрын
You have explained it very well but please make a video in Hindi language.
@theoryandapplication71972 ай бұрын
thank you
@marcochavez10522 ай бұрын
Hello, I have DSX-PLA804 CAT 8 permanent link adapters, am I able to test CAT 6 cable with those adapters or just CAT 8 cable?
@MikePennacchi2 ай бұрын
Those adapters are backwards compatible down to Cat 3 cable. You will be able to use them to test Cat 6 without an issue.
@Masti-Family3 ай бұрын
It is very good that you understand, but it would have been better if you had made a video in Hindi language. Because it will be easy for many people to understand.
@nick93233 ай бұрын
would be nice to see green closer, after it been putted in blue
@SeihingSei3 ай бұрын
ต้องการให้แปลให้ภาษาไทยครับ
@pt75763 ай бұрын
how do you connect Versiv using web browser interface?
@superdave5773 ай бұрын
Great Video!! We are having a fiber problem and I honestly didn't know our NetAlly's could do this. I know it isn't OTDR specific but what a great troubleshooting tool!
@abimbolabankole21843 ай бұрын
Thank you for this..
@JMPG223 ай бұрын
And this happens more often that people.think!
@KiraAmerica093 ай бұрын
I recognize the words being used but I don't understand the order in which they're being used
@joanf4 ай бұрын
Thanks for the video!
@rolandoarcay7924 ай бұрын
How to Test 120 UTP CAT6 using PoE?
@trenholmelodge18204 ай бұрын
as with a lot of these videos you know it so well you just scoot around the screen and say things like "go here and then here" etc. Please slow down and explain what to you is obvious. For a newbie, we do not know most of the basics and that is why we are watching. for the most part good explanations but show us how you got there. ie now we send the trace again. th anks
@DavePostma245 ай бұрын
Hi there Mike Pennacchi, I am currently working on my graduation project and have some questions regarding network protocols. I would love to ask you some questions that I can use for my project if you have some time and also would like to help me with my project. Sorry that this message has not much to do with your current video, but I didn't know another way to contact you. Kind Regards, Dave Postma
@johnnygomez78895 ай бұрын
THANK YOU MR. MIKE FOR A VERY GOOD EXPLANATION HOW TO USE DSX-8000. 👍👍
@tijuthomas8095 ай бұрын
Thanks this video was very helpful
@digitalelectronswebsolutio65245 ай бұрын
7:47 thanks for the info on LLDP AND CDP
@yuyunpurniawan62945 ай бұрын
Very amazing explain, thank you sir.
@gerardpaulninovergara55275 ай бұрын
Hi Mike, I am not sure if there was an instance that your video showed where the Link Runner G2 can identify or showed at what distance the cut exist.
@janwesten13174 ай бұрын
I might be mistaken, but as far as I know, only the Fluke CableIQ can do that. Unfortunately, it is no longer available, and its replacement is quite a bit pricier.
@nick93235 ай бұрын
nice nmap frontend
@stevensardi8095 ай бұрын
Hi Mike, I only have 1 DSX-PC6 head, I also have 1 PC6A head. I need to test some cat6 patch leads. Can I use these 2 heads together to test these? Are they compatible? I cannot find any suppliers in the UK that stock the PC6 heads
@ohsopoetical5 ай бұрын
Thanks for these videos Mike I've been learning from you for years
@kylebaylor42265 ай бұрын
Can you explain explain what to do if your TRC values come up negative?
@tatoooilserviceltd18425 ай бұрын
Hello I am Orlando Nathaniel I have cyberscope audit credits and I want to sell it
@patrickakinbobola6 ай бұрын
Thanks, Mike! Everything was brief and perfect. I have G2 AIRCHECK - Please, I really want to learn on how to use it to troubleshoot wireless signal, Range, Cellphone, Wi-Fi and road Access point.
@MikePennacchi6 ай бұрын
A good place to start is with this video series I did for NetAlly. It is on using the AirCheck to do a site survey. Here is a link to the playlist: kzbin.info/aero/PLVIgJ2mdtfw8LqGWr4Zc8xkSPV5VTdeku&si=XjvDOCkg0mjLz2ek Be sure to check out some of the other videos on their KZbin page.
@Jon-wf3tg6 ай бұрын
So I have a foreman that swears a perm link and channel are same results - uses patch cords on testers and runs a channel test to give customer. But I say it’s going to be quite different results not just length but other parameters will change. Also when you unplug your tester ( patch ) cord the results you have are now inaccurate. Help ? ( I’m an RCDD but he’s very intelligent and has been in field line thirty years so he’s got the respect ).
@Jon-wf3tg6 ай бұрын
@@MikePennacchi thanks Mike - much appreciated.
@mehdiansarimoud7 ай бұрын
Appreciated for useful tips 🙏🏻🙏🏻🙏🏻
@sahars8787 ай бұрын
🙏🙏🙏🙏🙏
@joerockhead72467 ай бұрын
slick
@Eric-qx1kx7 ай бұрын
When troubleshooting, is it ever beneficial to shoot a test with the main at the patch panel...then move the main to the other end(jack) and shoot it in the opposite direction...?? I don't see where this is that helpful but I do see folks doing it often.
@MikePennacchi7 ай бұрын
You are correct, there is no need to move the main to the remote end. The modules are exactly the same on both ends and the testing is performed in both directions. The key is using the information contained in the Fault Info tab in the test results and if necessary reading the HDTDR and HDTDX graphs. These will point you to where the problem is in most cases.
@mehdiansarimoud8 ай бұрын
So helpful. Thanks a lot Mike 🙏🏻🙏🏻
@Eric-qx1kx8 ай бұрын
It seems like it would make sense if the standards committee required NEXT and RL measurements for a channel test. If the patch cords are terminated poorly, the test will still pass, so it kind of makes the channel test useless, other than just for setting reference. I guess its not possible to run a channel test with the patch cord adaptors?? Whole thing seems strange, you almost have to first test your patch cables with the patch cord adaptors.....then just do a normal permanent link test and hope it all works when plugged in because its impossible to do a full true end to end test.
@kahmenglee58068 ай бұрын
I'm looking at acquiring this type of switch for a small network and there's big online discount ongoing now....perhaps a more powerful one is coming out soon. Your video answers my concerns about latency. Thanks.
@dankwaclark31339 ай бұрын
the content in the hex needs to be decoded and converted into messageFrame
@dankwaclark31339 ай бұрын
Please can you elaborate on how to decode the hex in each frame.
@TripleMachine10 ай бұрын
Are your devices calibrated? Why do they have the date set to 2021?
@MikePennacchi10 ай бұрын
These are training units that aren't typically calibrated. The date is 2021 since that was the year the live stream was originally broadcast. Needed to convert it from a live stream to a regular KZbin video to make it easier to share.
@rolandoarcay79210 ай бұрын
Hi Mike I am interesyed to enroll online on this course how please