Arkayne Co

Пікірлер

@LukePRTR 9 сағат бұрын

insane asking price

@Arkayne 6 минут бұрын

When you compare to all other bridges, this one is less expensive because it comes with everything you need, all up front. No piecing parts together. If you want capability and true cohesion between your units, this is the only bridge that does that.

@ODWizard 13 сағат бұрын

I love this thing. I couldn't bend the J-arm no matter how hard I tried. Running their Viper/ ST6 with the symbiote for the next milsim west event. The symbiote came with so many spare parts that I was almost able to make a bridge for my brother with some other spare parts I had lying around. I 100% recommend this.

@ODWizard 13 сағат бұрын

* I clarify that I couldn't bend it with my bare hands. I could probably maim it with tools or a vice grip.

@Arkayne 13 сағат бұрын

@@ODWizard Basically to break it you need to clamp it and grab a vice grip and have at it with force. We've tested it rigorously: even abusive environments will not break them. And if something breaks, your unit is likely messed up. Thanks for the support!!

@ar15dreaminrivera9 15 сағат бұрын

This is the most excited Ive been for a piece of kit since the Knights Armament bridge. KAC will never produce that product again and this is the only product that comes close to that level of dual band versatility. Just Had to order this.... now take my money!!

@Arkayne 14 сағат бұрын

We truly appreciate your kind words and support. This was a huge investment for us, but we knew the community needed it. Please drop a review of it once yours arrives. And feel free to keep in touch with us to let us know how it's working for your uses!

@Cookies205 17 сағат бұрын

Great product development guys!

@Arkayne 16 сағат бұрын

Thank you for the support! We hope it truly changes peoples lives like it changed ours.

@turdferguson2863 18 сағат бұрын

Got the notification that mine has shipped!

@Arkayne 16 сағат бұрын

That's great news on a Friday! We shipped a ton out since drop!

@turdferguson2863 13 сағат бұрын

@@Arkayne I'm stoked, I have two 14s and a sidekick 640 so I'll be busy!

@dpaulday 19 сағат бұрын

Do you plan to make a machined aluminum version at some point?

@Arkayne 16 сағат бұрын

We can neither confirm nor deny.

@ODWizard 13 сағат бұрын

If you are worried about the strength, I wouldn't be concerned. Carbon fiber reinforced Nylon is very tough. People print all sorts of stuff out of it and this bridge has metal reinforcement in some areas like around screws. Very tough.

@GloDc Күн бұрын

Can we get a parts list

@IndependentArmz Күн бұрын

Just found out this is your other channel from a TA video

@Arkayne Күн бұрын

Hey! Welcome. Thanks for checking all the channels out. It means a lot.

@duanefarrell2944 Күн бұрын

I really feel like they missed the mark. I was absolutely about to buy this product until I saw you mention it. It’s not a quick transition between helmet and rifle.. I want to be able to take this thing directly off my helmet and put it on my rifle without any tools..

@Arkayne 11 сағат бұрын

The RH25 V2 is your better option if that’s what you’re hunting for.

@kyleprintz6471 Күн бұрын

You just solved so many of my problems.. 🙌🏼

@Arkayne 11 сағат бұрын

Glad to hear it!

@West-j1j 2 күн бұрын

For anyone wanting to buy from arkayne, you should join the NV subreddit. The owner is unhinged, extremely petty and doxxing his own customers. FYI while *EVERY* nv dealer out there will happily consult with you for *FREE* , arkayne charges you for it.

@yugimuto9763 2 күн бұрын

Did Chinese thermal get tariffed tariffed?

@MrCoonass1970 2 күн бұрын

Whats differance of 2 inch offset and 3?

@ghostinthemachine88 2 күн бұрын

Cool but most of us have at home 3D printers now... and can manufacture similar existing files for next to nothing. Lol ....Including firearms. But to be real the entire 3D printing idea is to empower everyone with the technological knowledge if they so choose to possess & use in a law-abiding manor. With that being said.. I do like to sometimes purchase & store files because credit should be given where it is due for a really good design & I like to replicate if my personal products fail or I need duplicates. Js.

@Arkayne Күн бұрын

Isn't liberty awesome! We love printing and the ability for citizens to be able to remain free, even under oppressive regimes.

@ghostinthemachine88 Күн бұрын

@Arkayne well I can't contest that. Looking forward to see development we need that we can't replicate at home. Cheers.

@Lychee959 3 күн бұрын

Couldn't be fucked to MJF or SLS at that price?

@Arkayne 2 күн бұрын

@@Lychee959 did somebody hurt you? Or is that a genuine question. If it’s genuine, we’ll happily answer our reasons.

@Lychee959 2 күн бұрын

@Arkayne fully serious. I can give you a full cost breakdown of what I would expect to pay for the multijetting and hardware but I suspect you already know the numbers and know that even multi jetted, the profit margins would still be astronomical at your current price. It would also be an objectively better product with tighter tolerances and improved isotropic strength but I guess you don't think your customers are savvy enough to know

@Arkayne Күн бұрын

@@Lychee959 Solid Copy! There are many reasons for the method we chose on this iteration of the Symbiote. We weighed the pros and cons of each method, including machining our own in the shop, and landed on this process / design for the launch product, Version 1. We felt it was the best balance of cost for the customer, speed of production, and ability to further refine the design IF anyone has feedback that warrants it. We are thinking years ahead of this moment, and our processes and procedures will change. But for now, we landed on this process for the Symbiote. You pose a valid question about "our why", so I'm hoping this helps a little. We actually very much appreciate the knowledge our customer base has regarding printing. It's refreshing. Thanks for your comment!

@lennybrown4573 3 күн бұрын

I need one right now

@shuriken2505 3 күн бұрын

It's called night vision not day vision

@ScramGuns 3 күн бұрын

Lol the elbit is so unfocused its not funny. 81lp/mm that blurry vs the 72 photonis being MUCH sharper is impossible. Needs reshot with proper focus. Also the EBI on the photonis tubes were not correctly adjusted to be compared to L3 and Elbit (x10). Photonis can have great tubes but it seems a little misleading here, especially when the same res should have the same video sharpness/clarity.

@usastrongproducts6983 3 күн бұрын

Very good. I need one!

@peterbenke1962 3 күн бұрын

Pulsar Merger. Yes you can do that its easy and exists

@Vahriin 4 күн бұрын

I love this thing. It came with so many extra parts that I had enough to create a second bridge with the parts I already had sitting around. Now I can supply a friend with a bridge too.

@ar15dreaminrivera9 4 күн бұрын

Are you able to adjust for hieght offsets? For instance if I were to attach a dovetail mount on the mini rail of my sidekick 640 it would create a vertical alignment issue. It would presnt the same problem with a Nox. Does your product account for this?

@Arkayne 4 күн бұрын

Yes. You will be able to properly align your optic on ALL axes with what is included.

@turdferguson2863 4 күн бұрын

Okay, count me in!

@CRSTEK 4 күн бұрын

Wow.. you just ollied off that ledge with your nods deployed. If that doesnt showcase the Symbiote durability.. I dont know what does. Keep up the great work, Gentlemen.

@PeteSkeet06 4 күн бұрын

@@CRSTEK Thank You that wasn’t my first attempt though lol

@PeteSkeet06 4 күн бұрын

@@CRSTEK that was also my first time wearing nods while skating

@reedjack6564 4 күн бұрын

Is there a version like this but just for a standalone pvs 14?

@Arkayne Күн бұрын

You can absolutely run a PVS-14 alone on the bridge. Nothing wrong with that at all. Then you have the adaptability in the future to run dual 14's or a bridged thermal unit.

@reedjack6564 21 сағат бұрын

@Arkayne makes a lot of sense. Well done. I will definitely be looking at this as my go-to option in the future. I really would like to get the thermal and NV combination going.

@Tai-s4y 5 күн бұрын

whats the weight of the bridge

@Arkayne 4 күн бұрын

3.1 ounces including hardware

@AlvesHeim 5 күн бұрын

Wow. Wow. WOW. I'm so proud of America because its citizens are people like YOU. Gods Bless you with every innovation you do. Be strong, and proud. Stay Blessed. And keep Freedom! Gods Bless America and its people!!! 4ever

@PeteSkeet06 5 күн бұрын

Why are you saying Gods plural

@AlvesHeim 4 күн бұрын

@@PeteSkeet06 Because I'm a Norse Pagan.

@PeteSkeet06 4 күн бұрын

@@AlvesHeim Well that's silly there is only one true and living God.

@AlvesHeim 4 күн бұрын

@@PeteSkeet06 According to Jesus - it is not true 😄 Keep studying the Bible, it has many more secrets than you could ever guess!

@PeteSkeet06 4 күн бұрын

@@AlvesHeim respectfully I don’t think you understand what you are talking about

@UraniumEagle 5 күн бұрын

Hahaha $450 for a CF nylon print and hardware GTFOH. There are aluminum bridges like the Raven that come in well under that price point.

@Arkayne 5 күн бұрын

Does the Ravyn include: - Mini Rail Dovetail Adapter Standard - ST6 / AGM STINGIR Dovetail Adapter Standard - Panoramic arms / capability - Standard arms (interchangeable) - (2) J-Arms - Full X, Y, Z Axis adjustability to properly align ANY unit on the market? The answer is no. So it's not cheaper, it's less effective. All the aluminum options, when you add all the components we add standard, are closer to $800-900 on the market. This is half that price. Hope that helps!

@99cobra2881 5 күн бұрын

Freaking outstanding that the bridge comes with all of the attachments. None of this buy the bridge and have to also purchase additional dovetails or adapters. Value added product and I hope you guys sell a ton of these!

@RogueWarrior72 5 күн бұрын

This video is a perfect example as to why all my cash for training/playing goes to Arkayne versus any other competitor of theirs. As a self taught fabricator, trained GM technician, and former Aircraft structural mechanic in the USN, which all have to be creative in mindset to develope own tools, etc like Arkayne has done with everything they are doing! Since the beginning Self Sufficiency and being able to make and do everything without going thru others is the way to go. So long story short, and being new to the 3D printing world, this video, the combined intelligence of the crew at Arkayne, and everything Ethan has done for myself and selflessly squaring me away for going out into the dark has set them apart from other companies in the game! Strictly my Opinion and Cudo's on constantly thinking outside the box and making your company shine above the rest! Great Video! 🇺🇲

@Arkayne 4 күн бұрын

Thank you for the kind words and support. It means the world!