Thankyou

That is correct, I also agree with your comment, I've discussed this with the product owner and he has ensured it is suitable for both forms of fishing. I only use it for drone fishing with an overhead and it has performed very well though. Hope that helps?

For sure mate

Many thanks, the cuta is good at what it does. I'm working towards a review to cover the things I like and don't like about it. Appreciate your comment :)

I look forward to seeing your review. Im just about to buy a cuta copter after quite a bit of research. Cheers for your reply 👍 @@Land2AirFishing

Cheers mate I usually do that when I'm wearing waders. The surge of the incoming waves made it hard in this case.

Thanks, big aspiration of mine is to inspire others, glad to hear I've done that for you ☺️

Never heard of that drone before, have you got a link to where I can check it out?

Reoccurring message from earphone users, I intend on revisiting this and completing a better quality tutorial.

Ill be sure to try the painters tape next time. I used to use slits but they would break as my belt buckles are quite large due to the width of the belt on the gimble, so I just fold them over now. Thanks for your comment 🙂

Yeah man...coming up to 20 years soon

@@Land2AirFishing B Just clocked up 35 years for me Great info you convey back to the followers 👍

Only 4 people know where this is, so if it gets out I dont think ill have a hard time sussing out who let the cat out haha

@@Land2AirFishing always the way someone will always give a spot away to be popular or swap spots with others That happened to me 🤙

Hey Roger Thanks for taking the time to watch the video and comment mate!! At the time of production the research I gathered was alot of people asking for spots, not knowing where to fish and reports of people who had tried many times and had no success. Of course the location globally is going to favour some more than others, I believe the waters around NZ especially in the Northern island are great waters that hold alot of fish alot of thr time. Australian waters have been fished rather heavily and I believe this with the increased activity of sharks are a result of the lack of consistency when it comes to the landbased fisherman having success. I guess the message I was trying to deliver was its not accurate to expect the fishing to be better for you just because your now using a drone and can access waters that weren't reachable before.

Many thanks Rudolf....appreciate your comment 👍🏻

I dont, dji have changed the design and I'm unable to find a way to secure the hardware like I could on the mavic pro.

@@Land2AirFishing thanks anyway mate 👍

Thanks rick, glad you enjoyed it 😁

It was a mission for sure, the fishing and editing haha

Cheers Shane, I've disabled the downward facing sensors to eliminate them picking up the 3d printed bracket I was using... I think the drone needs a factory reset and calibration... ive flown it since and it's flying alot better

Agreed 👍🏻

It was definitely one of the better snapper dishes I've ever had mate

You're not wrong 👍🏻

Im still here...more coming mate...just not enough hours in a day

This will handle whatever the drone can handle 👌🏼

Thats one reason, other is the line clears the shore breakers, I don't need to lower the air pressure in the tyres, we don't have to deal with others travelling up and down the beach. The list goes on.

Thanks mate

Thankyou John for your comment 😀

Hi there 👋🏻 It's a long piece of pressure pipe from a construction site... nothing too fancy 🤣

@@Land2AirFishing 🤣🤣😂 sorry I meant on the Pajero mate.

@@iusannaidoo8336 oh right 😂 It's actually a ski clamp, it's a generic brand, can be a little tricky to find on ebay, but you'll eventually find them, otherwise rhino do a set which are far superior in quality, they just didn't do a size that was suitable for the space I have next to the half basket on the roof racks. Pretty convenient leaving the rod setup with the rig, just attach sinker and bait and its ready to go quick as, when I get home I usually take sinker off and store the whole setup on the wall 😁

You're welcome

I wouldn't recommend this type of release. to many things can go wrong, I have a 3d printed product that works flawlessly, can organize one for you if you send me an email to info @ land2airfishing dot com The phantom 3 is ok, loses signal with image about 400m out I found, decided to use a Mavic Pro instead as its more compact for my needs.

Ok yeah some clips of that product I’ll check it out and we’ll I got it yesterday I’m going to practice first and then take it out

@@Land2AirFishing even knowing that mavic pro can lift only ~450grams?

@@andrewb7817 this is not correct, payload is closer to 800g, I always deliver a bait and sinker combo at 500-550g

I guess all products have bad batches. People rate the prevail and I've seen that snap in half during a cast. My rod builder has over 40 blanks in his back room, all broken prevails.

@@Land2AirFishing Prevail is an awesome rod at a good price. Good recommendation

@@harizona1988 not based on my experience, id never buy or recommend one after what I saw happen to my father's and the room full of broken blanks at my rod builders workshop.

@@Land2AirFishing I have had a Prevail for years. I saw a Valkyrie explode and break in 3 places a couple of weeks ago. I have never seen a Prevail do that

@@Land2AirFishing I guess the difference between the Predator and the Prevail is the Prevail can actually be used for casting and is a third of the price

Cant please everybody aye

@@Land2AirFishing I see you put effort into your videos, thought you would want to know about the sound level

@@jonnywaselectric sounds is good my end, I cant factor everybody's setup when editing. Appreciate the feedback, it's too hard to get right when people say it's too loud and others say it's too quiet. That's why I say can't please everyone. Can you give me a time stamp of where the audio isn't loud enough sir?

@@Land2AirFishing 1.50 as soon as the music stops and you start talking, the music is roughly twice as loud as you 👍

@@jonnywaselectric thanks mate, is the audio throughout the rest of the review ok?

Thats a subjectionable comment, I understand the seat for overhead and agree with its casting ability, however it's not designed for casting. Did you actually watch the review? If you watched the review you'll see me casting with it. My casting got better and better the more I practised but its not built to cast distance so shouldn't be punished for that in my opinion. I'd like to hear if you've used it and what you'd recommend as an alternative to this?

@@Land2AirFishing I own the rod after buying in to all the hype. I have used it extensively and have had the reel seat come loose and twist from using an overhead on it. I have 3 friends that have also had the reel seat twist

@@Land2AirFishing Also, "subjectionable" is not a word

@@Land2AirFishing I recommend any spin rod at the same price point if you are using it for spin. I recommend any overhead rod at the same price point if you're using an overhead. If you are using it for droning I recommend any rod that isn't 10ft plus because it puts too much pressure on your body and you should be droning from an elevated platform, like a sand dune. In summary this rod attempts to do a range of different styles of fishing and does them all poorly.

@@harizona1988 Thanks for your opinion, have you used the Predator? Thats a pretty broad statement to recommend any rod for casting or spinning. Not every spot permits droning from dunes mate, that's a very narrow minded approach to drone fishing based on your description.