Thank you for the video. The information that Minnkota puts online does not show this as a lift assist. The wire you attached to the coiled spring made it simple to install. Minnkota says you need a special tool to install that. It looks like a simple wire like you used will do it. Thanks
@awhaletale6 сағат бұрын
Thanks MarkD-o1. You are welcome, and thank you for watching. I'm glad I could help. I'm sure you can do it with the wire as well. Thanks again, Best Wishes
@racerxv6valvoline42416 күн бұрын
Friend, I just watched your video, and you did a great job. Only thing I would suggest is never take it apart. I have had to replace my collar several times because they are brittle, and I always remove the head and then just slide the shaft out after removing the collar below that holds the spring assist to the shaft head. And yes, that spiring assist is a life saver. anyone that knows how heavy that motor is would agree.... Great job though!!!
@awhaletale16 күн бұрын
Thank you so much for watching the video and your suggestion, friend. I truly appreciate it and will follow your advice next time. That's what youtube was about helping others and having others help you by pointing out what could have been done to make it easier or better. Yes, it definitely is a life saver. Thanks again. I truly appreciate it. Best Wishes
@FredySavage18 күн бұрын
Straight robbery 😂
@awhaletale18 күн бұрын
No doubt 😂 thanks for watching. I'm glad you enjoyed it.
@alextschirlich22 күн бұрын
Thanks man, that helped me a lot! Green from Germany!
@awhaletale21 күн бұрын
Thank you, my pleasure, I truly appreciate it. I'm really glad you enjoyed the video, and it helped you out. I visited Germany in the 1990s amazing country, loved it there. Thanks again, Best Wishes
@raymondthompson147622 күн бұрын
Hi. Regarding our recent chat about bail-less Centaure reels, I've seen quite a few sawed-off conversions, but this one looks like it could be the real deal, as the bail swing mechanism appears to be absent. I'm inclined to think that a sawed off might not ber that efficient as the roller end of the arm is very tight to the spool in the closed position. What do yo think? Regards. Raymondo.
@awhaletale22 күн бұрын
Hi Raymondo, That would be awesome if it is the real deal. I personally haven't seen one but would imagine there may be some out there. I hope it is the real deal, either way you are going to have a blast fishing it. Feel free to share a picture, I truly enjoy fishing bail-less reels. Best Wishes, Ed
@Leafar-3000029 күн бұрын
That looks amazing, great job on it!
@awhaletale29 күн бұрын
Thank you so much. I appreciate your comments. I'm glad you enjoyed it. Best Wishes
@raymondthompson1476Ай бұрын
Hi again. Centaures are beautiful reels, and according to some old advertising sheets I've seen on line, they were also available bail-less. I've not seen one, not a real one anyway, but what do you think a bail-less conversion would turn out like? I'm asking because I do love occasionally fishing my vintage reels, but am a bail-less convert and there's no going back now. Raymondo. Ps. I also like the Spanish 'Sagarra' reels. Do you know of them?
@awhaletaleАй бұрын
The Centaurs have an amazing shape. I agree, they look awesome and they remind me of the Van Staal. I had no idea they made them bail-less. I have only seen them in half-bail. I think a conversion would look and function great. The Luxor I am working on now was missing the bail, it had been cut off and sealed, so I will be making that bail-less. Most of my reels now are either half-bail or bail-less. I started fishing with yoyos when I was a kid and they remind me of that style of fishing where you have more control of the line. I missed a Sagarra in an auction once, they are really nice-- I do have a bail-less AMSA Super Casting Spanish reel I have not been able to find any information on, but it is in beautiful shape, one of my favorites, and I probably won't be refinishing that one, but I will share it when I take it out fishing. As far as converting, I always think you should do things the way you like them, if it works for you, go for it--it's all that matters. Thanks again, Best Wishes!
@raymondthompson1476Ай бұрын
Hi. Great video, I just subscribed and cant wait to see all your other ones. I love vintage Ru reels, and Centaures, Luxor/Cracks etc.. you do them a great service in restoring them. I can fix them and get them going good, but the finishing job you do is something special. Regards. Raymondo.
@awhaletaleАй бұрын
Hi, Many thanks, I appreciate it! It's awesome to know that other people value the simplicity, beauty, and incredible durability of these vintage reels and great to hear you like fixing them as well. I will be uploading some more videos soon--just finishing a Monti Super video now that I will try to upload tonight and working on a Luxor next. Thanks again for commenting & subscribing! Best Wishes, Ed
@jeepc4x4Ай бұрын
If you would have keep the initial tension on the spring it would work even better.
@awhaletaleАй бұрын
Thanks for watching. Will do next time it needs replacing. I really appreciate you letting me know. Best Wishes
@douglasallen8596Ай бұрын
thank you using a modified version of this I stripped 800 ft of # 6 with the help of my wife and my john deere tractor pulled two hundred feet at a time in about 30 minutes adain thanks for sharing
@awhaletaleАй бұрын
Thank you, I really appreciate it. l'm glad you enjoyed it, found it helpful, and were able to use your modified version to strip all that wire. The amount of wire you were able to strip in that time is awesome. Thanks again for sharing your experience. Best Wishes
@thepenultimateninja57972 ай бұрын
I saw from the description that you are aware that anodizing can be stripped with sodium hydroxide, so I'm surprised you went with mechanical removal instead. Sodium hydroxide would have stripped the finish in a minute or two, even in all the little nooks and crannies, while barely affecting the underlying aluminum.
@awhaletale2 ай бұрын
Thank you for watching. You are 100% correct. The chemical removal would have been much easier and quicker. The reason I chose this route was because the reel with its age had lots of scrapes, nicks, and scratches, as well as many imperfections from mold that I figured would show if I didn't take it to a smooth finish by buffing when I gave it the final polish. By sanding the whole reel with the buffing discs as was able to see as went along how smooth it was becoming due to color difference between the sanded parts and anodized. But again, you are right. If it were a cleaner reel, your method would have been the way to go. Thanks for the info, I appreciate it. 👍 Best Wishes
@thepenultimateninja57972 ай бұрын
@@awhaletale Ah I see, that makes sense.
@awhaletale2 ай бұрын
👍 Thanks again for the info. I appreciate it, Best Wishes
@timkinkead78292 ай бұрын
I needed to make this repair and with your help I think I can do it ! Thank you very much !
@awhaletale2 ай бұрын
Thank you, timkinkead7829, You are welcome. I'm glad I could help, and that you enjoyed the video. I'm sure you can do it. Thanks again, Best Wishes
@Leafar-300002 ай бұрын
Excellent idea, nice use of found materials, looks great.
@awhaletale2 ай бұрын
Thanks for watching, I really appreciate it. I'm glad you enjoyed the video. Best Wishes
@Crow13-vv5ff2 ай бұрын
Mmm yes free birds flying high
@awhaletale2 ай бұрын
👍 Yes. Thanks for watching
@BIaccCat2 ай бұрын
Peeps are disgusting
@Veritas-superbia2 ай бұрын
Fuck ya America haha im doing this later
@awhaletale2 ай бұрын
😂😂😂 Enjoy
@frankviramontes1392 ай бұрын
Thanks, very informative. I'm going to install it on my own boat. It looks awesome!!
@awhaletale2 ай бұрын
Thank you, I truly appreciate your comments. l'm glad you enjoyed the video and found it helpful. It truly is a transom saver. Best Wishes
@jalaloujdik47532 ай бұрын
good job
@awhaletale2 ай бұрын
Thank you, Jazbdila. I truly appreciate all your comments, and I'm glad you enjoyed the videos. Best Wishes, Ed
@jalaloujdik47533 ай бұрын
Good work with a lot of creativity and professionalism. Thank you, Jazbdila
@awhaletale3 ай бұрын
Thank you, Jazbdila. I truly appreciate your comments. I'm glad you enjoyed the video. I'm no professional, just trying to show that with a little determination, anyone can do it. The final video of putting it together is coming next. Best Wishes, Ed
@spinfish14343 ай бұрын
Where’s the Rebuild Series?
@awhaletale3 ай бұрын
Thanks for watching spinfish1434. I apologize but had issues with my computer containing all my Whaler restoration videos. I finally was able to pass them to an external drive and will continue to upload them soon. Thanks again, Best Wishes
@jalaloujdik47533 ай бұрын
Greetings to you. I am a fan of Ru mer because I inherited it from my father and bought several copies of ru plagr, ru Recordette, and ru 602.
@awhaletale3 ай бұрын
Greetings. They are neat reals, I love the fact that most of them are bailess. The fact that you got the reel from your dad makes it special since I'm sure there are many precious memories that came with it. There is nothing like spending time with loved ones by the water. Please feel free to share your progress with your reels. Thanks again, I appreciate your comments and sharing your story. Best Wishes
@jalaloujdik47533 ай бұрын
Continue my regards
@awhaletale3 ай бұрын
Thank you so much. I appreciate it. I'll keep adding more videos on this reel and the next one I'll be working on. Hope your reel is coming out great. Best Wishes
@cb4ishoot3 ай бұрын
Great job... and, video!👍
@awhaletale3 ай бұрын
Thank you, cb4ishoot, I truly appreciate it. I'm really glad you enjoyed the video. Thanks again, Best Wishes
@user-xc7bb2kn9c3 ай бұрын
👍👍👍
@awhaletale3 ай бұрын
Thanks for watching. Glad you enjoyed it. Best Wishes 👍
@DesertRATyoutube3 ай бұрын
I tried this with two different cutters and new cut wheels didn’t work with either
@awhaletale3 ай бұрын
Thank you for watching. I'm sorry it didn't work for you. I'm not sure what could have gone wrong. As you can see from the video, it worked fine in my application and has as well for others. Maybe the coating on the wires you are stripping is different. Best Wishes
@mattkilbourne46543 ай бұрын
I'm so glad I found this video. You idea is brilliant. I am dealing with the same problem: Delamination on my runabout floor. Water is between the layers, so I figured I'd have to cut out the bad, dry everything, then re-lay a traditional fiber and resin combo. I was JUST about to order the glass and resin when I ran across your video. If it works for me, it'll not only save me money, it'll save me a lot of time and hard work! PS Love the blue tape idea. And drilling the Glue applicator!
@awhaletale3 ай бұрын
Thanks for watching, I'm really glad you found it helpful. The gorilla glue forms a foam when exposed to the moisture that is rock solid and waterproof. If you do a section and find the section next to it is soft, just keep applying blue tape and drilling and filling that new section. Patching those small holes is a breeze, and it becomes super strong. Just make sure you use the classic gorilla original glue. Thanks again for your comments. I really appreciate it. Best Wishes
@lamiaemellouki19074 ай бұрын
Keep going 👍
@awhaletale4 ай бұрын
Thank you for watching. I'm glad you enjoyed it. As soon as I have some time off, I will continue. Best Wishes
@tepp-dx3sc4 ай бұрын
He looks adorable!!
@awhaletale4 ай бұрын
Yeah 😃 He sure does. I'm glad you enjoyed it. Thanks for watching, Best Wishes
@jalaloujdik47534 ай бұрын
Thank you very much for the video. I found it with my father since childhood, and until now I have not been able to disassemble the router. Thanks to you, I will open it. Thank you.
@awhaletale4 ай бұрын
You are very welcome. I'm really happy it helped you. My greatest memories are ones fishing with my dad. Please feel free to ask any questions you might have. Best Wishes
@ryanreynolds62354 ай бұрын
Damn that is the best ideal I've seen in awhile genius
@awhaletale4 ай бұрын
Thank you, Ryan Reynolds, I truly appreciate it. l'm really glad you enjoyed the video. Thanks again.
@johnharrison24664 ай бұрын
Neat trick gonna give it a go,I have 600 feet of 10 gauge stranded to strip
@awhaletale4 ай бұрын
Thank you, johnharrison2466.I really appreciate it, and I'm glad you enjoyed the video. It should make stripping the 600 feet much easier.
@goldbond10344 ай бұрын
Yes, yes I did know that.
@awhaletale4 ай бұрын
Great to hear 👍. Thanks for watching. Best Wishes 1💙
@TravisJensen-us1zj4 ай бұрын
😂😂
@awhaletale4 ай бұрын
😂 🤣Thanks for watching. Best Wishes 1💙
@TravisJensen-us1zj4 ай бұрын
@@awhaletale absolutely 😋😋🫠
@TravisJensen-us1zj4 ай бұрын
@@awhaletale nice to also be your 500th subscriber lolol
@awhaletale4 ай бұрын
@TravisJensen-us1zj Thank you so much, I truly appreciate it. I'll make sure to make a note of it. Thanks again
@TravisJensen-us1zj4 ай бұрын
Had 1 job. Spell opossum right. Possom smh
@awhaletale4 ай бұрын
😂😅 Thanks for watching. Best Wishes 1💙
@Gterr19714 ай бұрын
I have a resident opossum, likes to sneak in my garage. I named it Tina.
@awhaletale4 ай бұрын
They are awesome. I had 2 in my garage as well they loved the dry cat food. Thanks for watching. Best Wishes😃 1💙
@Feytouched.Locket4 ай бұрын
Look at this little buddy! So cute!!
@awhaletale4 ай бұрын
She's a real cutee. I'm glad you enjoyed it. Thanks for watching😃 1💙
@mariegrace82424 ай бұрын
😳😳😳😬 that cat look so strange..... probably needs some milk!
@awhaletale4 ай бұрын
😆🤣 she's a cutee. I'll give her a bowl of milk 🥛 next time. Thanks for watching🤣 1💙
@AucklandFishing4 ай бұрын
lol just broke mine too 😂😂
@awhaletale4 ай бұрын
lololol 😆 🤣 it happens. At least it's an easy fix. Thanks for watching. Best Wishes
@m0rtuus6535 ай бұрын
can they still spread rabies?
@awhaletale5 ай бұрын
Thanks for watching. It's very unlikely, and it would be very rare, but anything is possible. 👍1💙
@yakiniperez64995 ай бұрын
Interesting
@awhaletale5 ай бұрын
Right?! They're incredible. I'm glad you enjoyed it. Thanks for watching. 👍 1💙
@pyroraptor43525 ай бұрын
Very interesting to know. Thanks for the info
@awhaletale5 ай бұрын
👍They are amazing. I'm glad you enjoyed it. Thanks for watching 1💙
@marygulash72425 ай бұрын
good idea--where did you get those rod holders? Having trouble finding ones with a small enough flange. Thanks
@awhaletale5 ай бұрын
Thank you, marygulash7242, I appreciate it. I'm glad you like it. I went ahead and added a link in the description of the same ones I used. Hope that helps. Thanks again, Best Wishes
@jalaloujdik47536 ай бұрын
Can you post a video of how to disassemble it? Thank you
@awhaletale6 ай бұрын
Thanks for watching, I'm currently traveling for the Holidays and will be back in mid-January. When I return, I will gladly post a video disassembling it for you.
@jalaloujdik47536 ай бұрын
@@awhaletale Thank you very much
@awhaletale4 ай бұрын
Sorry for the delay on video, but I will be back next Friday and make the video of taking reel appart for you. Thanks for watching, Best Wishes @jalaloujdik4753
@awhaletale4 ай бұрын
I was able to get the video of taking the reel apart, and I will upload it tomorrow. Sorry for the delay. Thanks again, Best Wishes
@jalaloujdik47534 ай бұрын
@@awhaletale Thanks for paying attention
@jalaloujdik47536 ай бұрын
You want to dismantle reel ru mer plage, but I did not find a way to remove the router from the chassis. Thank you
@MrGolfballsack6 ай бұрын
Excellent and simple
@awhaletale6 ай бұрын
Thank you MrGolfballsack , I really appreciate it. I'm glad you enjoyed the video.
@zaraiderahmed48157 ай бұрын
😂😂😂😂😂😂😂
@awhaletale7 ай бұрын
🤣🤣🤣
@user-co9kw9lq2c8 ай бұрын
hes going to come back when he gets big and mess you up!
@chanticleer07148 ай бұрын
😂 this is literally as big as they get. They're adorable little buggers. ❤
@awhaletale8 ай бұрын
😆Yeah, It's a good thing they don't get bigger. They are awesome. Thanks for watching. Nature Rules