I'm glad you addressed the skid plate - I got baptized in oil the first time I tried to take the shortcut and not remove it. Access cab doors are absolutely an issue at times. I have 2 young kids, and it feels like no matter how far back I park in the lot, people inevitably park beside me and make it a pain in the ass.

Your truck is sick! 🤩🫠

After watching this awesome vid I was ready to hate my life for a few days. Turns out I just needed to replace my cheap ass right outer tierod end. Thank you Jesus!

Would you know why the footwell light and the key ring light will only turn on when it touches metal

Awesome video 🥳🤝

Do you remember using any trim kits to fit right? I’ve used the same the ATOTO stereo but mine had big gaps on the sides and both top and bottom, it looks ridiculous to be honest.

Don't use those cheap red splices, do it right and use a proper crimp on or solder your wire connects and cover with heat shrink.

Could you not have used an impact on that tool to draw out the hub?

Cupping due to not rotating. If you do mostly city driving rotate every 5k-6k. Highway you can go as long as 10k per rotation. I use Discount Tire they rotate for free but they do charge for balancing.

Are you going to do a follow up on your Rubitrecks?

I just received the Rockville kit and I had one quick question. The kit comes with RCA cables to connect to the sub and the back of the head unit. In your video you didn’t use rca but I think you used a sub cable that only has 1 connection (not 2 on each end like the RCA cable). 12:32 I am doing this for the first time and would appreciate any help or guidance. Btw I love your videos. I installed the atoto head unit and back up camera following your video. Thank you!!

What CO-light projectors did you get? That link is dead. Have they held uo to your expectations? Edit- is it the 9003? I found the other video.

I was wondering if you have removed the rope inner hooks in the bed. Mine are stripped and rusted and can't seem to get them out. Any suggestions?

Something I learned in my search for a Toyota truck: TRD is NOT NECESSARILY four-wheel drive!

Hey Sal! This was awesome, appreciate the video buddy. We just got a 2006 SR5. Keep it up brother. Shiv & Diana

how much is this

love this video

Great Video!

It will be better if you buy the handle camera directly

Do you remember if you used the OEM bracket to mount it on Atoto’s bracket to line up the 4 screws or did you use something else? I have a sequoia which is identical to Tundra but my OEM would not bolt on ATOTOs bracket

Did you use sealant on the hinge to body of car?

thanks for posting this. Was looking this up and realized i need to do this asap

Yo Sal, I’ve been doing some research and some people have said you can fit 6x9’s in the access cab doors Wanted to see your opinion. Thank you!

Hi my friend... Is it for sale?

the price you pay to repair these trucks is tens of thousands less than anything new. will never seek my tundra. it will get whatever it needs when it need is

So, first you have to buy the Angel Eyes replacement assembly, then take those bulbs out and replace them with the projector bulbs? What is that gonna run dollarwise?

Cannot believe your truck has 227k miles and looks showroom.

Funny, the "Drive" bulb on my transmission indicator is out too. Will need to replace. I replaced the push button map lights just above the windshield on the roof. Those original bulb were pathetic. And I replaced the bulbs in the doors. On the doors and map light I replaced them with LED bulbs, but only got what I thought was marginal improvement.

Your 2002 is in mint condition.

Dah, Ya think telling us about the shit not being compatible before we tear into the dash might be thoughtful? Maybe you were absent when common sense was being handed out???

how are these holding up and doing now that you have had them a few months? debating between these and the at4w for my frontier

the man I look forward to watching on the tundra content!!!, ps: I'd prefer team rusteez but dinoco is a close second

I've been using these for a year or two on my Montero and have been happy with them in all conditions. I have 31" LT tires and they had a ton of tread, and a harder compound that the P tires so they still have a long while to go.

After the trial and error, my water spots were so bad on a black vehicle, especially on the hood, I first had to Claybar it, and then remove any leftover water spots with this product. Helpful tip: best to use small amount at a time, rub 30 seconds, let’s sit for 30 seconds, then buff and clean.

Any reason yu didn't replace the passenger side bearing?? IIRC, most Tundra front wheel bnearings turn about the same number of revolutions each 100,000 miles or so. Maybe you checked it and didn't shoot video of the passenger side wheel in the air. My 2000 doesn't have ABS so I should be able to replace my wheel bearing wither by buying a new hub with the bearing already in there or a friend of mine has a press and he can exchange "press time" for beer.....lol. I also noted no jack stands under the frame, but maybe I missed that step of the repair. All in all, very informative. Peace Out!!

I think it would’ve worked better down by the license plate.

Looking at a 2000 tundra for 5k with 180k miles super clean access cab, any thoughts?

The tire size you have is same on my 1989 GMC k2500 4x4

Great video.. helped me pull the trigger on these for my 21 4Runner ! Thank you

Where did you buy the dashboard?

Liked the video. But confusing since your compare the Goodyears after them being 40k miles already to a brand new tire. Not sure how that compares. It’s like used tire with 40k miles vs brand new tire. Of course the brand new tire is going to feel better. Would like an update when the tires get to 40k miles then compare them.

u jst might be missing bolts from your trans mount very common

Buying my late dads 04 Tundra SR5 DoubleCab & found this video very informative. Thank you for the wiper spray info! Lol that was the only thing thats bugged me so far other than that a great upgrade frok my 00 Tacoma access cab

I had a blower motor on a 95 Chevy pickup and it worked but its screamed like crazy when it was on. I took it out and soaked it with pb blaster or wd40 i can't remember but one of those two and put it back in and still work to this day without making noise. Helped it tremendously.

Getting ready to do this job do you know is I would need to get an Alignment done when its complete?

Great video. I just recently came to your videos bc im going to be leveling the front of my 01 tundra soon the same way as you did. Only thing is i keep seeing the different videos with the stock uca. Im planning on replacing mine with one that goes with a lift like that so my ubj is not so flexed in that position. Its bad for that and the suspension especially putting those new shocks on the front. Id look into it. Ive found some on Amazon for decent price around $100 for both with pretty good reviews. Anyways just thought id give advice on that and thanks for the awesome videos! Keep doing what you're doing and posting them!

I have a 01 tundra and did the led conversion dash light swap. Mine makes a whistling noise, how could I fix that?

Do you have an instagram account?

i gotta say that truck is in really good shape i have a 2003 tundra and im about to start restoring it myself and the weather stripping on mine is God awful compared to the ones you just replaced lol i no longer have any on mine tbh

Great video! What makes your video stand out to me is how brutally honest you were about breaking that bolt! Obviously you did not need to reveal that mistake but by sharing and being honest you may have saved a viewer that frustration! Awesome job, keep it up! You have good charisma! Thanks!