That unit won't but some units should, right? SMRTD5000XL has hot swappable batteries, and a bypass switch for bypassing the batteries. And it has a LED light that should light up when there are no batteries connected. At least that's according to what the user manual said. Does all of that make sense? Or will the unit still not do anything without batteries? I know that UPS is typically just will not do anything without batteries. Or without batteries connected. But from the user manual of this UPS, it suggests that it should. Basically I don't want to waste time and energy getting batteries for it considering how expensive they are If the unit isn't any good you know?
@user-ve8nq6ii7b6 ай бұрын
man, thank u soo much
@mac-cx9cy7 ай бұрын
Thanks for the video! I have a damaged UPS myself and it would be a shame to put it to trash. Where could I get a replacement unit button unit or replacement display? Thanks for any help
@Mahargulab7418 ай бұрын
internal RBC needs Replacement
@RadRob0009 ай бұрын
What do I do to get this thing to stop beeping!!! I’m in church and this thing is going off!!!!
@salmankamran85809 ай бұрын
Hello sir where to get the lcd screen of apc 1500va ups
@azizelminaoui953810 ай бұрын
Thank you
@user-vq8bg9bx6p11 ай бұрын
does anyone know this. I enter the part when need to choose date. But only date in month i was able once to changde and afther clicking the enter button it confirmed the all date replacement. Afther that i tried a few more times to set the date but this time it didnt want to enter to a part when we are able to set date. It just ask me "new battery question part" and afhter clicking yes it exit the setup. ....? Anyone. The model is SmartUps 1500
@harveyserrano11 ай бұрын
Español
@Renrimfo4 Жыл бұрын
Ok means to accept - got it
@mikeovanes Жыл бұрын
My red light replace battery went on for two days third day all is working fine? Please explain. Battery is 3 years old? Should i replace it anyway? Thank you..
@KarinaLoren Жыл бұрын
THANKS. This finally helped!
@gentrywilliams4255 Жыл бұрын
Is it acceptable for the utility company to be 10% or is it 20%? Because you said 20% but you said 108 Volts. 108 would be 10% off of 120 Volts. If it's a 20% fluctuation from the utility then it should be 96 Volts and that sounds like it would be unacceptable because that seems almost like it should almost always start pulling from battery when hooked up to a server, NASs, switches, or any network infrastructure really. But im a layman when it comes to electricity as a whole. Im a network administrator/RMM, MSP, and designer and you would think id know more about the proper voltage but I wanted to ask because I use APC UPSs for my end points and Tripp-lite UPSs for my server racks.
@achridhan Жыл бұрын
what exactly that load indicator mean? is it max watt of device that using it? where we can get this data? like example im using apc 1000
@psfgtech Жыл бұрын
I have an old APC 700, and I think the battery needs to be replaced. A red light in a box w/ an x is lite, and thing was beeping like mad. But, I moved cables and I have a light fix. I'm either swapping battery or buying updated system
@JoanNin Жыл бұрын
Hi I have the APC SRT3000XLA and for some reason, after a power outage after the energy establishes the UPS doesn't power on automatically any idea?
@FijiLaw Жыл бұрын
Answer starts @1:23 , alot of jibber jabber, you're welcome
@Maisonier Жыл бұрын
Great video! liked and subscribed.
@wisdomtosin7146 Жыл бұрын
How do I know if it is charging???
@Blankfbuser Жыл бұрын
Of course mine is doing something you didn’t cover. The “battery charge” lights (all of them) are blinking. What does that mean?
@NaveedMumtaz0308 Жыл бұрын
good
@ArceAngel Жыл бұрын
no comment🤣.
@HoangTuan-kz7vr2 жыл бұрын
very useful
@tonymontana8972 жыл бұрын
Hi Jon, My issue is a little different. I recently purchased a good used APC C 1500 UPS and it sat for maybe two months before I got to use it. It has the LCD display. After installing it, I connected power supply lead to main power then plugged one load cable to surveillance unit. I wanted UPS to my CCTV system in case of a black out. After pressing the power on button on UPS, the battery charge indicates very low battery due to it having sat around for a while, the batteries have discharged. What happens after a short time, after having line voltage, the UPS will drop the output voltage then switch off. Why would it turn off if it's connected to mains power. It should be charging the batteries AND be able to provide output to power external device right ? The Battery back up is only there in case of a power outage, but there is no outage as such as it's connected to mains power. Would a bad battery pack be messing with the electronics and is shutting the whole unit as a form of protection ? I hope you can share some knowledge here please. Thank you.
@hamjalaansari95472 жыл бұрын
Thank you very much for this video
@robotergaming_offl_2.02 жыл бұрын
APC UPS Apc the order number and they said they were working
@iangreen1802 жыл бұрын
Ha! Well, my power here varies from 89 V or worse, to 175 V, sometimes many times per second. Anytime anyone wants to do welding anywhere nearby, which is quite frequent considering the number of houses being built around here, they just have a long branch with a wire on it to throw the wire with a hook on it onto the overhead power lines! These fluctuations along with the frequent power outages chews through UPS batteries in about six months. The batteries in my APC UPS are absolutely and totally dead, but I'll have a look for the sensitivity button anyway. I've had to just put my computers, whose power supplies are fine from 100-250VAC, onto the surge protection only, for a long time. Using my other (non-APC) UPS only to backup the power for the Internet equipment.
@Mohsinali-wo5de2 жыл бұрын
Excellent
@zarifahnr22102 жыл бұрын
Hi! Your tutorial is helpful but I have a problem with changing the date as it changes back to the old date after a few seconds. Is there any other way to change the date for new batteries? Edit: Problem solved! Just have to do it manually (connect the ups & my laptop) using its software to update everything.
@julienhadda65372 жыл бұрын
Same pb today… how Reset battery Life Time
@hectorortega90522 жыл бұрын
Disculpa donde se puede obtener el software para realizar ese cambio?
@allanpaulocanero912411 ай бұрын
can you send the video or link connecting the ups and laptop? thanks
@abubakarsheraz62912 жыл бұрын
My aps ups of 3000 va is not getting on due to touching both terminals plus towards nagative Can u help ma what I have to do
@Spartankarthik41702 жыл бұрын
Ants went inside my UPS LBPro 1000. It started fluctuating. Asked for technician.. Is there anything I can make the ants to stop going inside??.. please help
@azizullahmomand16762 жыл бұрын
hello dear i want make my apc 1000 watt work in low battery even battery low up to 18 so how do that?
@anthonyalleyne87242 жыл бұрын
Hi i have the 2200xl 120 vdc, but the display face flat cable got damaged! and the power and test buttons r missing, is there a fix for it?
@user-sr9dq6lq1o2 жыл бұрын
This is my work with many different communication devices, including electronic, electrical, and information security.💖💖
@zayarwailin9042 жыл бұрын
Load is 20% , What does it mean? 20% of 1980kWH max capacity? That would give us around 396kWH per load bar? Please correct me if I am wrong.
@umabarathi14503 жыл бұрын
When i was playing on my PS4 it suddenly started blinking green and then switched itself off. I have no idea why it happened
@reemamohan33603 жыл бұрын
All lights flashing....load became zero computers shuts down..it's APC SMART 1000
@johnlin16503 жыл бұрын
Thanks
@olajideseleem39163 жыл бұрын
Please how can I resolve alarm error P.06 on UPS APC SMT2200IC
@cjlagmay7693 жыл бұрын
Hi all LEDs are blinking and beeping, what is the problem
@layton35033 жыл бұрын
I got all the way back to the power plant, I think I have as broken unit
@samtv64473 жыл бұрын
My Ups is beeping amber light on charge what does it mean