This works for 2003 2004 2005 2006 2007 2008 2009 2010 Toyota Corolla remote keyless system You can try this video; however, it is not associated with our website: kzbin.info/www/bejne/eZy8o42JnpupqqMsi=ltOaMoLN2AJORZmV
@8BBB88.3 күн бұрын
@@carandtruckremotes thanks! It appears this car i just got a 2000 Corolla ce isn't capable or I guess compatible with a unlock lock key fob. I got it because the seller said the only 1 of the keys is good for the ignition this bad one use for doors so to save key life I was hoping the fob would work but I don't think this vehicle features it
@jeffmatchette98377 күн бұрын
Can't get this to work on my 2003 honda element EX. Have tried many times with no response of the locks at all. My car is a manual, not sure that has any impact. Any help would be greatly appreciated.
@carandtruckremotes6 күн бұрын
Hi Jeff, Do you have power door locks on the car? Have you ever had a remote on the car before? There is a possibility that the original owner changed the remote receiver on the vehicle or that you have the wrong remote for the car as well. Try to match the following by calling the dealer with your VIN to be sure the remote you have is compatible: Honda Part Number: 72147-S5T-A01, 72147S5TA01 FCC ID: OUCG8D-344H-A, OUCG8D344HA Frequency: 314 MHz
@JALPA9218 күн бұрын
When I program one remote the other stops working
@carandtruckremotes6 күн бұрын
You have to do both back to back during the same procedure. Once you hold Lock/Unlock on the first remote and it connects, put that one down and pick up the other one and press and hold lock/unlock on the second one Before taking the key out of the ignition. Do not start over at the beginning between each remote. I hope this helps. :)
@LeahK-zr4re10 күн бұрын
Does this work with a remote start key?
@carandtruckremotes10 күн бұрын
These programming instructions will not work for smart key fobs or proxy keys. If you have a separate remote start key fob or remote, you most likely have a separate receiver for that on your vehicle and that would require programming with a locksmith.
@gabriel.95411 күн бұрын
Thank you! This worked on my 2008 Mazda3.
@4g63_Everything19 күн бұрын
NOTE: This only works for Keyless entry system function, You can't run the engine, just cranking only.. In my case the MASTER KEY is gone, so cloning/ register the Transponder inside the new replacement key fob won't work. You still need the MASTER KEY first for you to be able cloning the transponder and make your engine run not just for remote keyless entry.
@carandtruckremotes19 күн бұрын
Correct. This programming is not for the chip in the key, only for the remote to function.
@FishinYakker22 күн бұрын
I tried this about 10 times on my 2008 RAV4 base, and I cant get it to enter the programming mode to add a key. Any suggestions? Thank you.
@carandtruckremotes20 күн бұрын
Have you ever had a remote on the car before? Some base models do not have the receiver for the remote. These instructions are only for the remote. They will not program the chip in the key to start the car. That has to be done by a locksmith.
@FishinYakker19 күн бұрын
@@carandtruckremotes I am working with the original key fob that used to work with the car. I replaced the battery in the fob, and it hasnt worked since. The red LED lights up when I press any button, and the battery tests good. The fob only has the lock/unlock/panic buttons and it used to work. I cant seem to get the car to enter programming mode..
@carandtruckremotes19 күн бұрын
@@FishinYakker try rebooting the receiver by unplugging one of the car battery cables for about 20-30 mins and then try to get the car into programming mode again. You may just have a bug in the system keeping it from engaging and this may do the trick.
@FishinYakker17 күн бұрын
@@carandtruckremotes I will try that, thank you. Right now the car is in the shop for some recall repairs.
@rebekahreyes760927 күн бұрын
Ok so I did this and they new key fobs unlock and lock but won’t turn the car on 🙁 how do I program it so it turns the car on as well?
@carandtruckremotes27 күн бұрын
The chip in the key must be professionally programmed by a locksmith. These instructions will only program the remote portion of the unit.
@MRAustismCFEpilepsy29 күн бұрын
My key and remote are on thing…
@carandtruckremotes27 күн бұрын
If they are one unit, you will need to have the key portion cut and programmed to start the car by a local locksmith. These instructions are only for the remote portion of the key. The chip in the key must be professionally programmed in order to use the key to start the car.
@Faris-ee2jsАй бұрын
How I can work with a copy one ,, the key light keeps flashing all the time, now I have just one key to use 😢
@carandtruckremotesАй бұрын
If you have the flip type key, the chip in the key will require separate programming by a locksmith in order to start the car with the key. If you are trying to program more than one remote to the vehicle, you need to do both back to back during the same procedure (do not start over at the beginning each time). Please email us at [email protected] if you have further questions.
@richardgriffnАй бұрын
Wil it start the car as well
@carandtruckremotesАй бұрын
The chip in the key will require professional programming by a locksmith. These instructions are only for the remote buttons.
@benmobiАй бұрын
Fantastic, thank you, thank you1
@benjaminharvey2229Ай бұрын
Works....not at all....
@carandtruckremotesАй бұрын
I would call the dealer with your VIN to obtain the correct part number. There are several different receivers and remotes that can be on the Tundras. All Toyota installed, but some are dealer installed and others factory installed. Once you have the correct part number, you can match it to what you have ordered and make sure it is the correct remote.
@sbraveАй бұрын
Tried this for my 2006 Civic remote and it didn't work. Tried programming with both the lock and unlock buttons. Any ideas?
@carandtruckremotesАй бұрын
Have you had a remote on the car before? Some Honda remotes look the same, are you sure you have the correct remote? If so, you can try to reboot the receiver by disconnecting one of the car battery cables for about 20-30 mins and then reconnect and try the programming again. You can also swing by an auto parts store to test the remote signal to be sure it is working properly. I hope this helps. :)
@carandtruckremotesАй бұрын
Normally I tell people to push lock after turning the key to the on position. Just lock. (not either or) Turn key on, press lock, turn key off, turn key on, press lock, turn key off, turn key on, press lock, turn key off, 4th time... turn key on, press lock LOCK (twice quickly) and then turn the key off. Exit the vehicle to test the fob. Try not to lag between steps. If you make a mistake, start the car, turn off they ignition, open and close the door and start fresh. I hope this will help!
@sbraveАй бұрын
@@carandtruckremotes I just got the car a couple days ago. The seller said the remote worked, but he lost the round battery cover on the back side and never replaced it. This is a separate HONDA remote, not attached to the key like the newer ones. I went to Honda yesterday, and they gave me a new cover and a battery. This is the older style remote, with Lock/Unlock/Panic buttons. I can try and disconnect the battery and see if that makes a difference, thanks!
@carandtruckremotesАй бұрын
@@sbrave I've seen these older Honda systems be a little picky. I hope the reboot will help. Sometimes it is all about timing on these.... too fast or too slow and the system does not like it. I hope you can get it working.
@sbraveАй бұрын
@@carandtruckremotes Thanks! Maybe I was doing it too slow. Yes, would be nice to be able to have a remote in the modern day, lol, esp since only the drivers door has key access.
@BeigesBeijАй бұрын
A 6 dollar remote bought here in the Philippines worked on 2003 Toyota Rav4 (2 Button w/o immobilezer) Thanks to this video! Thank you! 🙏🏼
@ChelaChac2 ай бұрын
2003 Tacoma . thank you for the step by step. I think they sold me the wrong transponder because once I hit the step where I have to press on both lock& unlock then lock, nothing happens. I tried rewrite mode since "add" didn't seem to work. I also programmed my F150 key fob and those work fine. So im going to remove the battery for 5 to 10 minutes to see if that resets anything.
@carandtruckremotesАй бұрын
If you are still having trouble with the remote and cannot get it to connect and purchased it from us, please reach out to me via email at [email protected] We have an excellent return/exchange policy. I will help you determine if you purchased the correct unit or not and also suggest some other troubleshooting tips. I apologize for the late response. I just regained access to the comments section.
@tennisdad52 ай бұрын
The second time you switched the ignition are you saying press unlock OR LOCK? Please speak slower so it’s easier to understand you. I’ll wait for a reply before I send them back to you for refund.
@tennisdad52 ай бұрын
Very frustrating even after watching various videos . Still do not work . Hopefully I can get my money back
@tennisdad52 ай бұрын
Couldn’t understand if he was saying push lock and then unlock each time or if you just needed to push one or the other. Not working on my 06 element
@carandtruckremotesАй бұрын
If you are still having trouble, please reach out to us at [email protected] for some troubleshooting tips and instruction clarification. I'm sorry for the late response. I just regained access to the page and comments section.
@carandtruckremotesАй бұрын
Normally I tell people to push lock after turning the key to the on position. Just lock. (not either or) Turn key on, press lock, turn key off, turn key on, press lock, turn key off, turn key on, press lock, turn key off, 4th time... turn key on, press lock LOCK (twice quickly) and then turn the key off. Exit the vehicle to test the fob. Try not to lag between steps. If you make a mistake, start the car, turn off they ignition, open and close the door and start fresh. I hope this will help!
@user-vw7ns7wo5u2 ай бұрын
❤
@cocodog853 ай бұрын
this doesn't work on my 2007 buick lacrosse.
@carandtruckremotes2 ай бұрын
These instructions will only work for the Buick Rainier.
@carandtruckremotes2 ай бұрын
Unfortunately, the Lacrosse remotes will require professional programming by a locksmith in your area.
@WTFFN3 ай бұрын
Did it also program the key chip or you gotta still get the key chipped with a scanner tool
@carandtruckremotes2 ай бұрын
This programming will only sync the remote, the chip in the key requires professional programming by a locksmith.
@infiniti_chik12253 ай бұрын
Thank you for the detailed instructions. I was able to easily and quickly program my remote(s) - excellent video!
@carandtruckremotes3 ай бұрын
Happy we were able to help!
@JodieAlpers3 ай бұрын
I admit, I'm sometimes skeptical. This video seemed too easy. I bought 2 fobs off Amazon, watched the video, then took the laptop with me and sat in the vehicle and had them both programmed in less than 10 minutes. Nice job on video. Clear and concise. Thanks!!!!
@ronaldjaydehnjr3 ай бұрын
worked great on my lincoln town car thank you ! A++++++
@anonuser3 ай бұрын
Press lock OR unlock or lock AND unlock?
@thatfishingdude93563 ай бұрын
Mu 02 avalon wont enter program mode
@ucanoe3 ай бұрын
Thank you, just want to be sure does this method program the whole key fob as a master key... for doors, security and ignition? understanding that the blank key has to be cut of course.
@carandtruckremotes3 ай бұрын
This will only program the remote portion. They key will require separate programming to start the car with the chipped key.
@abner3343 ай бұрын
Thank you! I really appreciate this video
@haal17474 ай бұрын
I got two toyota keys similar to rav4 2010 key, although the rav went into programming mode but the key failed to work. The key has 4 buttons instead of 3, it was maybe on a camry. Any ideas.
@k1ng4014 ай бұрын
He’s saying “press lock OR unlock on the remote”. It doesn’t matter which one you choose.
@vkumra4 ай бұрын
Wow. That was easy and I did it along with you as the video played. Perfect. Now have two fobs ready to go. Thank you!
@rodrogers68954 ай бұрын
Works great!
@JLMTreeService4 ай бұрын
Thank you!!!
@ralphwhitaker87614 ай бұрын
I did that, it just lock and unlock but remote still not working
@danieldeanda58164 ай бұрын
Why is my 04 rav4 not entering programming mode?
@user-gg6do2pg3p5 ай бұрын
Didn't work
@chucksuarez82145 ай бұрын
What do you do if the program doesn't work and the alarm goes off and none of the remotes work?.
@malibayman5 ай бұрын
So now the new remote works but the original that DID work, no longer works? You still only have one remote working?
@segounlocks502915 күн бұрын
It’s timed and it auto erase other remotes. He didn’t do it fast enough but these remotes don’t look and are reusable
@kingston0912065 ай бұрын
What if you can’t turn the ignition
@stevejette23295 ай бұрын
How about a Mazda 5 2012 that has only a metal key with a black plastic base ... no buttons. Opens doors and goes into ignition but will not turn. When I put a paper clip into a tiny hole, a piece comes out the base. It has a small black cube in it. I think she lost the actual fob with buttons. Thanks for ANY advice. She is a homeless lady, 63, living in her van.
@elcaballopapi5 ай бұрын
What a good time, today you gotta go to a dealership and pay unnecessary money for them to reprogram your keyfob
@lisawertrea90215 ай бұрын
Didn’t work for mine
@Katy-Did5 ай бұрын
Will this work on a 2001 Tacoma with a west coast dealer installed Karr alarm?
@loneshark31715 ай бұрын
❤️❤️❤️
@usa933055 ай бұрын
Easy installation and going slow . ❤
@JamesPDoan6 ай бұрын
WORKS on 2001 Toyota Prius. Thanks!!🎉
@tylerolthuizen33476 ай бұрын
For some reason by fob stopped working on my 2007 rav 4. The red light however was still showing on the fob when pressing a button. Reprogramming fixed it, thanks a lot!
@jwagvideos6 ай бұрын
Yes, worked for my 2008 fit as well. Saved me $172.00, which is what my local Honda dealership quoted me to program the remote. What a joke. Took me two minutes. Thanks much!
@halfbreed026 ай бұрын
legit worked on my 2006 ford escape limitted... been using my key to lock and unlock for about 5 months after a new computer installed...... thank you.